[asterisk-commits] test-config.yaml.sample: Add some whitespace for readability (testsuite[master])
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Sun Oct 25 09:36:39 CDT 2015
Anonymous Coward #1000019 has submitted this change and it was merged.
Change subject: test-config.yaml.sample: Add some whitespace for readability
......................................................................
test-config.yaml.sample: Add some whitespace for readability
This patch adds a bit of extra whitespace to the test-config sample yaml file
and breaks up a few long lines for readability.
Change-Id: I95af9e13272bdc28c170eb3eccb9238c4be6ae32
---
M sample-yaml/test-config.yaml.sample
1 file changed, 56 insertions(+), 21 deletions(-)
Approvals:
Anonymous Coward #1000019: Verified
Joshua Colp: Looks good to me, approved
diff --git a/sample-yaml/test-config.yaml.sample b/sample-yaml/test-config.yaml.sample
index 3bd44a0..2e920a7 100644
--- a/sample-yaml/test-config.yaml.sample
+++ b/sample-yaml/test-config.yaml.sample
@@ -8,12 +8,15 @@
testinfo:
# If true, skip execution of this test
skip : 'Brief reason for skipping test' # OPTIONAL
+
# A summary of what the test does
summary: 'Put a short one liner summary of the test here'
+
# A detailed description of what functionality is covered by the test
description: |
'Put a more verbose description of the test here. This may span
multiple lines.'
+
# A sequence of key/value pairs specifying issues in an issue tracker related to this test
issues: # OPTIONAL
# List of issue numbers associated with this test
@@ -23,16 +26,20 @@
# The properties section contains information about requirements and
# dependencies for this test.
properties:
+
# The minimum version of Asterisk necessary to run the test
minversion: '1.8.0.0'
+
# The maximum version of Asterisk that this test can exeucte under
maxversion: '10.5.1' # OPTIONAL
+
# A sequence of feature specifies that the version of Asterisk under test must support.
features: # OPTIONAL
# List features the Asterisk version under test must support for this test
# to execute. All features must be satisfied for the test to run.
- 'digiumphones'
- 'cert'
+
# The Asterisk modules and third party applications/libraries necessary to run the test
dependencies: # OPTIONAL
# List dependencies that must be met for this test to run. Any of the
@@ -77,52 +84,60 @@
#
- core # This test is part of the core support level.
- voicemail # This test involves voicemail functionality.
- # The expected result of the test. Setting this to False will cause the test to pass if the test returns failure
+
+ # The expected result of the test. Setting this to False will cause the test
+ # to pass if the test returns failure
expectedResult: True # OPTIONAL
- # Settings that override the runtests script's test-config.yaml pre/post condition test settings
+
+ # Settings that override the runtests script's test-config.yaml pre/post
+ # condition test settings
testconditions: # OPTIONAL
- #
+
# List of overrides for pre-test and post-test conditions. If a condition is
# defined for a test, the configuration of that condition in the test overrides
# the setting defined in the global test configuration file.
- #
- - # Check for thread usage in Asterisk. Any threads present in Asterisk after test
+
+ -
+ # Check for thread usage in Asterisk. Any threads present in Asterisk after test
# execution - and any threads that were detected prior to test execution
# that are no longer present - will be flagged as a test error.
name: 'threads'
- #
+
# Disable execution of this condition. This setting applies to any defined condition.
# Any other value but 'False' will result in the condition being executed.
enabled: 'False'
- #
+
# Execute the condition, but expect the condition to fail
expectedResult: 'Fail'
- #
+
# The thread test condition allows for certain detected threads to be
# ignored. This is a list of the thread names, as reported by the CLI
# command 'core show threads'
ignoredThreads:
- 'netconsole'
- 'pbx_thread'
- #
- - # Check for SIP dialog usage. This looks for any SIP dialogs present
+
+ -
+ # Check for SIP dialog usage. This looks for any SIP dialogs present
# in the system before and after a run; if any are present and are not
# scheduled for destruction, an error is raised.
name: 'sip-dialogs'
- #
+
# In addition to checking for scheduled destruction, a test can request that
# certain entries should appear in the SIP history. If the entries do not
# appear, an error is raised.
sipHistoryRequirements:
- 'NewChan'
- 'Hangup'
- #
- - # Check for held locks in Asterisk after test execution. A lock is determined to
+
+ -
+ # Check for held locks in Asterisk after test execution. A lock is determined to
# be in potential error if threads are detected holding mutexes and waiting on
# other threads that are also holding mutexes.
name: 'locks'
- #
- - # Check for active channels in Asterisk. If active channels are detected, flag
+
+ -
+ # Check for active channels in Asterisk. If active channels are detected, flag
# an error
name: 'channels'
#
@@ -130,8 +145,9 @@
# If the number of channels detected is greater than this value, an error is raised.
# By default, this value is 0.
allowedchannels: 1
- #
- - # Check for active file descriptors in Asterisk. File descriptors detected before
+
+ -
+ # Check for active file descriptors in Asterisk. File descriptors detected before
# test execution are tracked throughout the test; if any additional file descriptors
# after test execution are detected, the test condition fails.
name: 'file-descriptors'
@@ -139,26 +155,42 @@
# Modules to load for tests that use the Test Suite's pluggable framework. If
# using the Test Suite's pluggable framework, this block is required.
test-modules:
- #add-test-to-search-path: 'True'
+
+ # If defined and set to True, the test directory will be added to the
+ # Python module loader path.
+ add-test-to-search-path: True
+
+ # Add an explicit path to the Python module loader path.
+ add-to-search-path: '/usr/foo'
+
+ # Add a path relative to the test directory to the Python module loader path.
+ add-relative-to-search-path: '../../foo'
+
# Defines the primary object that orchestrates test execution
test-object:
+
# The keyword in the test-config.yaml file that provides the configuration for the test object
config-section: test-object-config
+
# The fully qualified package.module.class to instantiate as the test object
# A few that are available:
# SimpleTestCase.SimpleTestCase, BridgeTestCase.BridgeTestCase, sipp.SIPpTestCase
typename: 'SimpleTestCase.SimpleTestCase'
+
# A sequence that defines optional pluggable modules to inject into the test object
modules: # OPTIONAL
-
# The keyword in the test-config.yaml file that provides the configuration for the module
config-section: 'ami-config-1.3'
+
# The fully qualified package.module.class to instantiate as the module.
# A few that are available:
# ami.AMIEventModule, cdr.CDRModule
typename: 'ami.AMIEventModule'
+
# The minimum version of Asterisk necessary to load this module
minversion: '1.8.0.0' # OPTIONAL
+
# The maximum version of Asterisk that this module can load under
maxversion: '11.0.0' # OPTIONAL
-
@@ -167,7 +199,8 @@
typename: 'ami.AMIEventModule'
minversion: '12.0.0'
-# The configuration for the test object. The configuration will differ depending on the test object used
+# The configuration for the test object. The configuration will differ depending
+# on the test object used
test-object-config:
reactor-timeout: 30
spawn-after-hangup: True
@@ -176,7 +209,8 @@
channel: 'Local/play at default'
application: 'Echo'
-# The configuration for a pluggable module. See other *-config.yaml.sample files for more details.
+# The configuration for a pluggable module. See other *-config.yaml.sample files
+# for more details.
ami-config-1.3:
-
type: 'headermatch'
@@ -191,7 +225,8 @@
AppData: 'AMI 1.3'
count: '1'
-# The configuration for a pluggable module. See other *-config.yaml.sample files for more details.
+# The configuration for a pluggable module. See other *-config.yaml.sample files
+# for more details.
ami-config-1.4:
-
type: 'headermatch'
--
To view, visit https://gerrit.asterisk.org/1520
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-MessageType: merged
Gerrit-Change-Id: I95af9e13272bdc28c170eb3eccb9238c4be6ae32
Gerrit-PatchSet: 2
Gerrit-Project: testsuite
Gerrit-Branch: master
Gerrit-Owner: Matt Jordan <mjordan at digium.com>
Gerrit-Reviewer: Anonymous Coward #1000019
Gerrit-Reviewer: Corey Farrell <git at cfware.com>
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: Matt Jordan <mjordan at digium.com>
More information about the asterisk-commits
mailing list