[asterisk-commits] chan dahdi: Add the chan dahdi.conf force restart unavailabl... (asterisk[13])
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Thu Apr 30 11:11:11 CDT 2015
Mark Michelson has submitted this change and it was merged.
Change subject: chan_dahdi: Add the chan_dahdi.conf force_restart_unavailable_chans option.
......................................................................
chan_dahdi: Add the chan_dahdi.conf force_restart_unavailable_chans option.
Some telco switches occasionally ignore ISDN RESTART requests. The fix
for ASTERISK-19608 added an escape clause for B channels in the restarting
state if the telco ignores a RESTART request. If the telco fails to
acknowledge the RESTART then Asterisk will assume the telco acknowledged
the RESTART on the second call attempt requesting the B channel by the
telco. The escape clause is good for dealing with RESTART requests in
general but it does cause the next call for the restarting B channel to be
rejected if the telco insists the call must go on that B channel.
chan_dahdi doesn't really need to issue a RESTART request in response to
receiving a cause 44 (Requested channel not available) code. Sending the
RESTART in such a situation is not required (nor prohibited) by the
standards. I think chan_dahdi does this for historical reasons to deal
with buggy peers to get channels unstuck in a similar fashion as the
chan_dahdi.conf resetinterval option.
* Add the chan_dahdi.conf force_restart_unavailable_chans compatability
option that when disabled will prevent chan_dahdi from trying to RESTART
the channel in response to a cause 44 code.
ASTERISK-25034 #close
Reported by: Richard Mudgett
Change-Id: Ib8b17a438799920f4a2038826ff99a1884042f65
---
M UPGRADE.txt
M channels/chan_dahdi.c
M channels/sig_pri.c
M channels/sig_pri.h
M configs/samples/chan_dahdi.conf.sample
5 files changed, 29 insertions(+), 13 deletions(-)
Approvals:
Mark Michelson: Looks good to me, approved; Verified
Joshua Colp: Looks good to me, but someone else must approve
diff --git a/UPGRADE.txt b/UPGRADE.txt
index d0db4db..9adf305 100644
--- a/UPGRADE.txt
+++ b/UPGRADE.txt
@@ -40,6 +40,13 @@
by the CLI command is always the Asterisk version. This CLI command
will be removed in Asterisk 14.
+chan_dahdi:
+ - Added the force_restart_unavailable_chans compatibility option. When
+ enabled it causes Asterisk to restart the ISDN B channel if an outgoing
+ call receives cause 44 (Requested channel not available). The new option
+ is enabled by default in current release branches for backward
+ compatibility.
+
res_pjsip:
- The dtmf_mode now supports a new option, 'auto'. This mode will attempt to
detect if the device supports RFC4733 DTMF. If so, it will choose that
diff --git a/channels/chan_dahdi.c b/channels/chan_dahdi.c
index 53899d8..6958e5b 100644
--- a/channels/chan_dahdi.c
+++ b/channels/chan_dahdi.c
@@ -919,6 +919,7 @@
.privateprefix = "",
.unknownprefix = "",
.colp_send = SIG_PRI_COLP_UPDATE,
+ .force_restart_unavailable_chans = 1,
.resetinterval = -1,
},
#endif
@@ -12346,6 +12347,7 @@
#if defined(HAVE_PRI_MCID)
pris[span].pri.mcid_send = conf->pri.pri.mcid_send;
#endif /* defined(HAVE_PRI_MCID) */
+ pris[span].pri.force_restart_unavailable_chans = conf->pri.pri.force_restart_unavailable_chans;
#if defined(HAVE_PRI_DATETIME_SEND)
pris[span].pri.datetime_send = conf->pri.pri.datetime_send;
#endif /* defined(HAVE_PRI_DATETIME_SEND) */
@@ -18258,6 +18260,8 @@
else
ast_log(LOG_WARNING, "'%s' is not a valid reset interval, should be >= 60 seconds or 'never' at line %d.\n",
v->value, v->lineno);
+ } else if (!strcasecmp(v->name, "force_restart_unavailable_chans")) {
+ confp->pri.pri.force_restart_unavailable_chans = ast_true(v->value);
} else if (!strcasecmp(v->name, "minunused")) {
confp->pri.pri.minunused = atoi(v->value);
} else if (!strcasecmp(v->name, "minidle")) {
diff --git a/channels/sig_pri.c b/channels/sig_pri.c
index 395ae35..a66d16b 100644
--- a/channels/sig_pri.c
+++ b/channels/sig_pri.c
@@ -133,15 +133,6 @@
*/
//#define ALWAYS_PICK_CHANNEL 1
-/*!
- * Define to force a RESTART on a channel that returns a cause
- * code of PRI_CAUSE_REQUESTED_CHAN_UNAVAIL(44). If the cause
- * is because of a stuck channel on the peer and the channel is
- * always the next channel we pick for an outgoing call then
- * this can help.
- */
-#define FORCE_RESTART_UNAVAIL_CHANS 1
-
#if defined(HAVE_PRI_CCSS)
struct sig_pri_cc_agent_prv {
/*! Asterisk span D channel control structure. */
@@ -7170,9 +7161,9 @@
pri_hangup(pri->pri, pri->pvts[chanpos]->call, e->hangup.cause);
pri->pvts[chanpos]->call = NULL;
}
-#if defined(FORCE_RESTART_UNAVAIL_CHANS)
if (e->hangup.cause == PRI_CAUSE_REQUESTED_CHAN_UNAVAIL
&& pri->sig != SIG_BRI_PTMP && !pri->resetting
+ && pri->force_restart_unavailable_chans
&& pri->pvts[chanpos]->resetting == SIG_PRI_RESET_IDLE) {
ast_verb(3,
"Span %d: Forcing restart of channel %d/%d since channel reported in use\n",
@@ -7181,7 +7172,6 @@
pri->pvts[chanpos]->resetting = SIG_PRI_RESET_ACTIVE;
pri_reset(pri->pri, PVT_TO_CHANNEL(pri->pvts[chanpos]));
}
-#endif /* defined(FORCE_RESTART_UNAVAIL_CHANS) */
if (e->hangup.aoc_units > -1)
ast_verb(3, "Channel %d/%d, span %d received AOC-E charging %d unit%s\n",
pri->pvts[chanpos]->logicalspan, pri->pvts[chanpos]->prioffset, pri->span, (int)e->hangup.aoc_units, (e->hangup.aoc_units == 1) ? "" : "s");
@@ -7319,9 +7309,9 @@
pri_hangup(pri->pri, pri->pvts[chanpos]->call, e->hangup.cause);
pri->pvts[chanpos]->call = NULL;
}
-#if defined(FORCE_RESTART_UNAVAIL_CHANS)
if (e->hangup.cause == PRI_CAUSE_REQUESTED_CHAN_UNAVAIL
&& pri->sig != SIG_BRI_PTMP && !pri->resetting
+ && pri->force_restart_unavailable_chans
&& pri->pvts[chanpos]->resetting == SIG_PRI_RESET_IDLE) {
ast_verb(3,
"Span %d: Forcing restart of channel %d/%d since channel reported in use\n",
@@ -7330,7 +7320,6 @@
pri->pvts[chanpos]->resetting = SIG_PRI_RESET_ACTIVE;
pri_reset(pri->pri, PVT_TO_CHANNEL(pri->pvts[chanpos]));
}
-#endif /* defined(FORCE_RESTART_UNAVAIL_CHANS) */
#ifdef SUPPORT_USERUSER
if (!ast_strlen_zero(e->hangup.useruserinfo)) {
diff --git a/channels/sig_pri.h b/channels/sig_pri.h
index 12f3dca..52e6c72 100644
--- a/channels/sig_pri.h
+++ b/channels/sig_pri.h
@@ -496,6 +496,8 @@
#if defined(HAVE_PRI_MCID)
/*! \brief TRUE if allow sending MCID request on this span. */
unsigned int mcid_send:1;
+ /*! \brief TRUE if forcing RESTART when receive cause 44 on this span. */
+ unsigned int force_restart_unavailable_chans:1;
#endif /* defined(HAVE_PRI_MCID) */
#if defined(HAVE_PRI_DATETIME_SEND)
/*! \brief Configured date/time ie send policy option. */
diff --git a/configs/samples/chan_dahdi.conf.sample b/configs/samples/chan_dahdi.conf.sample
index 13691fc..e027e64 100644
--- a/configs/samples/chan_dahdi.conf.sample
+++ b/configs/samples/chan_dahdi.conf.sample
@@ -196,6 +196,20 @@
;
;resetinterval = 3600
;
+; Enable per span to force a RESTART on a channel that returns a cause
+; code of PRI_CAUSE_REQUESTED_CHAN_UNAVAIL(44). If the cause is because
+; of a stuck channel on the peer and the channel is always the next
+; channel we pick for an outgoing call then this might help.
+;
+; NOTE: Sending a RESTART in response to a cause 44 is not required
+; (nor prohibited) by the standards and is likely a primitive chan_dahdi
+; response to call collisions (glare) and buggy peers. However, there
+; are telco switches out there that ignore the RESTART and continue to
+; send calls to the channel in the restarting state.
+; Default yes in current release branches for backward compatibility.
+;
+;force_restart_unavailable_chans=yes
+;
; Assume inband audio may be present when a SETUP ACK message is received.
; Q.931 Section 5.1.3 says that in scenarios with overlap dialing, when a
; dialtone is sent from the network side, progress indicator 8 "Inband info
--
To view, visit https://gerrit.asterisk.org/304
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-MessageType: merged
Gerrit-Change-Id: Ib8b17a438799920f4a2038826ff99a1884042f65
Gerrit-PatchSet: 2
Gerrit-Project: asterisk
Gerrit-Branch: 13
Gerrit-Owner: Richard Mudgett <rmudgett at digium.com>
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: Mark Michelson <mmichelson at digium.com>
More information about the asterisk-commits
mailing list