[asterisk-commits] Change in asterisk[master]: res_pjsip: Add global option to limit the maximum time for i...

SVN commits to the Asterisk project asterisk-commits at lists.digium.com
Fri Apr 17 15:33:29 CDT 2015


Matt Jordan has submitted this change and it was merged.

Change subject: res_pjsip: Add global option to limit the maximum time for initial qualifies
......................................................................


res_pjsip: Add global option to limit the maximum time for initial qualifies

Currently when Asterisk starts initial qualifies of contacts are spread out
randomly between 0 and qualify_timeout to prevent network and system overload.
If a contact's qualify_frequency is 5 minutes however, that contact may be
unavailable to accept calls for the entire 5 minutes after startup.  So while
staggering the initial qualifies is a good idea, basing the time on
qualify_timeout could leave contacts unavailable for too long.

This patch adds a new global parameter "max_initial_qualify_time" that sets the
maximum time for the initial qualifies.  This way you could make sure that all
your contacts are initialy, randomly qualified within say 30 seconds but still
have the contact's ongoing qualifies at a 5 minute interval.

If max_initial_qualify_time is > 0, the formula is initial_interval =
min(max_initial_interval, qualify_timeout * random().  If not set,
qualify_timeout is used.

The default is "0" (disabled).

ASTERISK-24863 #close

Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4
Tested-by: George Joseph <george.joseph at fairview5.com>
---
M CHANGES
M configs/samples/pjsip.conf.sample
A contrib/ast-db-manage/config/versions/a541e0b5e89_add_pjsip_max_initial_qualify_time.py
M include/asterisk/res_pjsip.h
M res/res_pjsip.c
M res/res_pjsip/config_global.c
M res/res_pjsip/pjsip_options.c
7 files changed, 69 insertions(+), 3 deletions(-)

Approvals:
  Matt Jordan: Looks good to me, approved; Verified
  Joshua Colp: Looks good to me, but someone else must approve



diff --git a/CHANGES b/CHANGES
index 7e54a20..ef78d97 100644
--- a/CHANGES
+++ b/CHANGES
@@ -147,6 +147,10 @@
    unavailable.  When any contact becomes available, the endpoint will status
    will change back to "Reachable".
 
+ * A new global option has been added: "max_initial_qualify_time", which
+   sets the maximum amount of time from startup that qualifies should be
+   attempted on all contacts.
+
 res_ari_channels
 ------------------
  * Two new events, 'ChannelHold' and 'ChannelUnhold', have been added to the
diff --git a/configs/samples/pjsip.conf.sample b/configs/samples/pjsip.conf.sample
index 57b712a..0f95d19 100644
--- a/configs/samples/pjsip.conf.sample
+++ b/configs/samples/pjsip.conf.sample
@@ -869,7 +869,10 @@
             ; The order by which endpoint identifiers are given priority.
             ; Identifier names are derived from res_pjsip_endpoint_identifier_*
             ; modules. (default: ip,username,anonymous)
-
+;max_initial_qualify_time=4 ; The maximum amount of time (in seconds) from
+                              startup that qualifies should be attempted on all
+                              contacts.  If greater than the qualify_frequency
+                              for an aor, qualify_frequency will be used instead.
 
 ; MODULE PROVIDING BELOW SECTION(S): res_pjsip_acl
 ;==========================ACL SECTION OPTIONS=========================
diff --git a/contrib/ast-db-manage/config/versions/a541e0b5e89_add_pjsip_max_initial_qualify_time.py b/contrib/ast-db-manage/config/versions/a541e0b5e89_add_pjsip_max_initial_qualify_time.py
new file mode 100644
index 0000000..0ffd784
--- /dev/null
+++ b/contrib/ast-db-manage/config/versions/a541e0b5e89_add_pjsip_max_initial_qualify_time.py
@@ -0,0 +1,20 @@
+"""add pjsip max_initial_qualify_time
+
+Revision ID: a541e0b5e89
+Revises: 461d7d691209
+Create Date: 2015-04-15 14:37:36.424471
+
+"""
+
+# revision identifiers, used by Alembic.
+revision = 'a541e0b5e89'
+down_revision = '461d7d691209'
+
+from alembic import op
+import sqlalchemy as sa
+
+def upgrade():
+    op.add_column('ps_globals', sa.Column('max_initial_qualify_time', sa.Integer))
+
+def downgrade():
+    op.drop_column('ps_globals', 'max_initial_qualify_time')
diff --git a/include/asterisk/res_pjsip.h b/include/asterisk/res_pjsip.h
index 184cb57..99b65ab 100644
--- a/include/asterisk/res_pjsip.h
+++ b/include/asterisk/res_pjsip.h
@@ -1995,4 +1995,12 @@
  */
 unsigned int ast_sip_get_keep_alive_interval(void);
 
+/*!
+ * \brief Retrieve the system max initial qualify time.
+ *
+ * \retval the maximum initial qualify time.
+ */
+unsigned int ast_sip_get_max_initial_qualify_time(void);
+
+
 #endif /* _RES_PJSIP_H */
diff --git a/res/res_pjsip.c b/res/res_pjsip.c
index 4f77b51..e54f2c7 100644
--- a/res/res_pjsip.c
+++ b/res/res_pjsip.c
@@ -1229,6 +1229,10 @@
 				<configOption name="keep_alive_interval" default="0">
 					<synopsis>The interval (in seconds) to send keepalives to active connection-oriented transports.</synopsis>
 				</configOption>
+				<configOption name="max_initial_qualify_time" default="0">
+					<synopsis>The maximum amount of time from startup that qualifies should be attempted on all contacts.
+					If greater than the qualify_frequency for an aor, qualify_frequency will be used instead.</synopsis>
+				</configOption>
 				<configOption name="type">
 					<synopsis>Must be of type 'global'.</synopsis>
 				</configOption>
diff --git a/res/res_pjsip/config_global.c b/res/res_pjsip/config_global.c
index 2aa1583..42ba234 100644
--- a/res/res_pjsip/config_global.c
+++ b/res/res_pjsip/config_global.c
@@ -33,6 +33,7 @@
 #define DEFAULT_OUTBOUND_ENDPOINT "default_outbound_endpoint"
 #define DEFAULT_DEBUG "no"
 #define DEFAULT_ENDPOINT_IDENTIFIER_ORDER "ip,username,anonymous"
+#define DEFAULT_MAX_INITIAL_QUALIFY_TIME 0
 
 static char default_useragent[256];
 
@@ -50,6 +51,8 @@
 	unsigned int max_forwards;
 	/* The interval at which to send keep alive messages to active connection-oriented transports */
 	unsigned int keep_alive_interval;
+	/* The maximum time for all contacts to be qualified at startup */
+	unsigned int max_initial_qualify_time;
 };
 
 static void global_destructor(void *obj)
@@ -159,6 +162,21 @@
 	interval = cfg->keep_alive_interval;
 	ao2_ref(cfg, -1);
 	return interval;
+}
+
+unsigned int ast_sip_get_max_initial_qualify_time(void)
+{
+	unsigned int time;
+	struct global_config *cfg;
+
+	cfg = get_global_cfg();
+	if (!cfg) {
+		return DEFAULT_MAX_INITIAL_QUALIFY_TIME;
+	}
+
+	time = cfg->max_initial_qualify_time;
+	ao2_ref(cfg, -1);
+	return time;
 }
 
 /*!
@@ -271,6 +289,9 @@
 	ast_sorcery_object_field_register(sorcery, "global", "keep_alive_interval",
 		__stringify(DEFAULT_KEEPALIVE_INTERVAL),
 		OPT_UINT_T, 0, FLDSET(struct global_config, keep_alive_interval));
+	ast_sorcery_object_field_register(sorcery, "global", "max_initial_qualify_time",
+		__stringify(DEFAULT_MAX_INITIAL_QUALIFY_TIME),
+		OPT_UINT_T, 0, FLDSET(struct global_config, max_initial_qualify_time));
 
 	if (ast_sorcery_instance_observer_add(sorcery, &observer_callbacks_global)) {
 		return -1;
diff --git a/res/res_pjsip/pjsip_options.c b/res/res_pjsip/pjsip_options.c
index dc5a701..9c0a137 100644
--- a/res/res_pjsip/pjsip_options.c
+++ b/res/res_pjsip/pjsip_options.c
@@ -994,14 +994,20 @@
 	struct ast_sip_contact *contact = obj;
 	struct ast_sip_aor *aor = arg;
 	int initial_interval;
+	int max_time = ast_sip_get_max_initial_qualify_time();
 
 	contact->qualify_frequency = aor->qualify_frequency;
 	contact->qualify_timeout = aor->qualify_timeout;
 	contact->authenticate_qualify = aor->authenticate_qualify;
 
 	/* Delay initial qualification by a random fraction of the specified interval */
-	initial_interval = contact->qualify_frequency * 1000;
-	initial_interval = (int)(initial_interval * ast_random_double());
+	if (max_time && max_time < contact->qualify_frequency) {
+		initial_interval = max_time;
+	} else {
+		initial_interval = contact->qualify_frequency;
+	}
+
+	initial_interval = (int)((initial_interval * 1000) * ast_random_double());
 
 	if (contact->qualify_frequency) {
 		schedule_qualify(contact, initial_interval);

-- 
To view, visit https://gerrit.asterisk.org/48
To unsubscribe, visit https://gerrit.asterisk.org/settings

Gerrit-MessageType: merged
Gerrit-Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4
Gerrit-PatchSet: 8
Gerrit-Project: asterisk
Gerrit-Branch: master
Gerrit-Owner: George Joseph <george.joseph at fairview5.com>
Gerrit-Reviewer: George Joseph <george.joseph at fairview5.com>
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: Matt Jordan <mjordan at digium.com>



More information about the asterisk-commits mailing list