[asterisk-commits] rmudgett: trunk r414052 - in /trunk: ./ channels/sig_pri.c
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Fri May 16 12:32:48 CDT 2014
Author: rmudgett
Date: Fri May 16 12:32:44 2014
New Revision: 414052
URL: http://svnview.digium.com/svn/asterisk?view=rev&rev=414052
Log:
sig_pri.c: Pull the pri_dchannel() PRI_EVENT_RING case into its own function.
* Populate the CALLERID(ani2) value (and the special CALLINGANI2 channel
variable) with the ANI2 value in addition to the PRI specific ANI2 channel
variable.
* Made complete snapshot staging with the channel lock held. All channel
snapshots need to be done while the channel lock is held.
........
Merged revisions 414050 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 414051 from http://svn.asterisk.org/svn/asterisk/branches/12
Modified:
trunk/ (props changed)
trunk/channels/sig_pri.c
Propchange: trunk/
------------------------------------------------------------------------------
Binary property 'branch-12-merged' - no diff available.
Modified: trunk/channels/sig_pri.c
URL: http://svnview.digium.com/svn/asterisk/trunk/channels/sig_pri.c?view=diff&rev=414052&r1=414051&r2=414052
==============================================================================
--- trunk/channels/sig_pri.c (original)
+++ trunk/channels/sig_pri.c Fri May 16 12:32:44 2014
@@ -1043,8 +1043,8 @@
return NULL;
}
- if (!p->owner)
- p->owner = c;
+ ast_assert(p->owner == NULL || p->owner == c);
+ p->owner = c;
p->isidlecall = 0;
p->alreadyhungup = 0;
ast_channel_transfercapability_set(c, transfercapability);
@@ -5751,6 +5751,479 @@
}
#endif /* defined(HAVE_PRI_CALL_HOLD) */
+/*!
+ * \internal
+ * \brief Setup channel variables on the owner.
+ *
+ * \param pri PRI span control structure.
+ * \param chanpos Channel position in the span.
+ * \param ev SETUP event received.
+ *
+ * \note Assumes the pri->lock is already obtained.
+ * \note Assumes the sig_pri_lock_private(pri->pvts[chanpos]) is already obtained.
+ *
+ * \return Nothing
+ */
+static void setup_incoming_channel(struct sig_pri_span *pri, int chanpos, pri_event *ev)
+{
+ struct ast_channel *owner;
+ char ani2str[6];
+ char calledtonstr[10];
+
+ sig_pri_lock_owner(pri, chanpos);
+ owner = pri->pvts[chanpos]->owner;
+ if (!owner) {
+ return;
+ }
+
+ ast_channel_stage_snapshot(owner);
+
+#if defined(HAVE_PRI_SUBADDR)
+ if (ev->ring.calling.subaddress.valid) {
+ /* Set Calling Subaddress */
+ sig_pri_set_subaddress(&ast_channel_caller(owner)->id.subaddress,
+ &ev->ring.calling.subaddress);
+ if (!ev->ring.calling.subaddress.type
+ && !ast_strlen_zero((char *) ev->ring.calling.subaddress.data)) {
+ /* NSAP */
+ pbx_builtin_setvar_helper(owner, "CALLINGSUBADDR",
+ (char *) ev->ring.calling.subaddress.data);
+ }
+ }
+ if (ev->ring.called_subaddress.valid) {
+ /* Set Called Subaddress */
+ sig_pri_set_subaddress(&ast_channel_dialed(owner)->subaddress,
+ &ev->ring.called_subaddress);
+ if (!ev->ring.called_subaddress.type
+ && !ast_strlen_zero((char *) ev->ring.called_subaddress.data)) {
+ /* NSAP */
+ pbx_builtin_setvar_helper(owner, "CALLEDSUBADDR",
+ (char *) ev->ring.called_subaddress.data);
+ }
+ }
+#else
+ if (!ast_strlen_zero(ev->ring.callingsubaddr)) {
+ pbx_builtin_setvar_helper(owner, "CALLINGSUBADDR", ev->ring.callingsubaddr);
+ }
+#endif /* !defined(HAVE_PRI_SUBADDR) */
+ if (ev->ring.ani2 >= 0) {
+ ast_channel_caller(owner)->ani2 = ev->ring.ani2;
+ snprintf(ani2str, sizeof(ani2str), "%d", ev->ring.ani2);
+ pbx_builtin_setvar_helper(owner, "ANI2", ani2str);
+ }
+
+#ifdef SUPPORT_USERUSER
+ if (!ast_strlen_zero(ev->ring.useruserinfo)) {
+ pbx_builtin_setvar_helper(owner, "USERUSERINFO", ev->ring.useruserinfo);
+ }
+#endif
+
+ snprintf(calledtonstr, sizeof(calledtonstr), "%d", ev->ring.calledplan);
+ pbx_builtin_setvar_helper(owner, "CALLEDTON", calledtonstr);
+ ast_channel_dialed(owner)->number.plan = ev->ring.calledplan;
+
+ if (ev->ring.redirectingreason >= 0) {
+ /* This is now just a status variable. Use REDIRECTING() dialplan function. */
+ pbx_builtin_setvar_helper(owner, "PRIREDIRECTREASON",
+ redirectingreason2str(ev->ring.redirectingreason));
+ }
+#if defined(HAVE_PRI_REVERSE_CHARGE)
+ pri->pvts[chanpos]->reverse_charging_indication = ev->ring.reversecharge;
+#endif
+#if defined(HAVE_PRI_SETUP_KEYPAD)
+ ast_copy_string(pri->pvts[chanpos]->keypad_digits,
+ ev->ring.keypad_digits, sizeof(pri->pvts[chanpos]->keypad_digits));
+#endif /* defined(HAVE_PRI_SETUP_KEYPAD) */
+
+ /*
+ * It's ok to call this with the owner already locked here
+ * since it will want to do this anyway if there are any
+ * subcmds.
+ */
+ sig_pri_handle_subcmds(pri, chanpos, ev->e, ev->ring.subcmds,
+ ev->ring.call);
+
+ ast_channel_stage_snapshot_done(owner);
+ ast_channel_unlock(owner);
+}
+
+/*!
+ * \internal
+ * \brief Handle the incoming SETUP event from libpri.
+ *
+ * \param pri PRI span control structure.
+ * \param e SETUP event received.
+ *
+ * \note Assumes the pri->lock is already obtained.
+ *
+ * \return Nothing
+ */
+static void sig_pri_handle_setup(struct sig_pri_span *pri, pri_event *e)
+{
+ int exten_exists_or_can_exist;
+ int could_match_more;
+ int need_dialtone;
+ int law;
+ int chanpos = -1;
+ struct ast_callid *callid = NULL;
+ struct ast_channel *c;
+ char plancallingnum[AST_MAX_EXTENSION];
+ char plancallingani[AST_MAX_EXTENSION];
+ pthread_t threadid;
+
+ if (!ast_strlen_zero(pri->msn_list)
+ && !sig_pri_msn_match(pri->msn_list, e->ring.callednum)) {
+ /* The call is not for us so ignore it. */
+ ast_verb(3,
+ "Ignoring call to '%s' on span %d. Its not in the MSN list: %s\n",
+ e->ring.callednum, pri->span, pri->msn_list);
+ pri_destroycall(pri->pri, e->ring.call);
+ goto setup_exit;
+ }
+ if (sig_pri_is_cis_call(e->ring.channel)) {
+ sig_pri_handle_cis_subcmds(pri, e->e, e->ring.subcmds, e->ring.call);
+ goto setup_exit;
+ }
+ chanpos = pri_find_principle_by_call(pri, e->ring.call);
+ if (-1 < chanpos) {
+ /* Libpri has already filtered out duplicate SETUPs. */
+ ast_log(LOG_WARNING,
+ "Span %d: Got SETUP with duplicate call ptr (%p). Dropping call.\n",
+ pri->span, e->ring.call);
+ pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_NORMAL_TEMPORARY_FAILURE);
+ goto setup_exit;
+ }
+ if (e->ring.channel == -1 || PRI_CHANNEL(e->ring.channel) == 0xFF) {
+ /* Any channel requested. */
+ chanpos = pri_find_empty_chan(pri, 1);
+ if (-1 < chanpos) {
+ callid = func_pri_dchannel_new_callid();
+ }
+ } else if (PRI_CHANNEL(e->ring.channel) == 0x00) {
+ /* No channel specified. */
+#if defined(HAVE_PRI_CALL_WAITING)
+ if (!pri->allow_call_waiting_calls)
+#endif /* defined(HAVE_PRI_CALL_WAITING) */
+ {
+ /* We will not accept incoming call waiting calls. */
+ pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_NORMAL_CIRCUIT_CONGESTION);
+ goto setup_exit;
+ }
+#if defined(HAVE_PRI_CALL_WAITING)
+ chanpos = pri_find_empty_nobch(pri);
+ if (chanpos < 0) {
+ /* We could not find/create a call interface. */
+ pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_NORMAL_CIRCUIT_CONGESTION);
+ goto setup_exit;
+ }
+
+ callid = func_pri_dchannel_new_callid();
+
+ /* Setup the call interface to use. */
+ sig_pri_init_config(pri->pvts[chanpos], pri);
+#endif /* defined(HAVE_PRI_CALL_WAITING) */
+ } else {
+ /* A channel is specified. */
+ callid = func_pri_dchannel_new_callid();
+ chanpos = pri_find_principle(pri, e->ring.channel, e->ring.call);
+ if (chanpos < 0) {
+ ast_log(LOG_WARNING,
+ "Span %d: SETUP on unconfigured channel %d/%d\n",
+ pri->span, PRI_SPAN(e->ring.channel), PRI_CHANNEL(e->ring.channel));
+ } else {
+ switch (pri->pvts[chanpos]->resetting) {
+ case SIG_PRI_RESET_IDLE:
+ break;
+ case SIG_PRI_RESET_ACTIVE:
+ /*
+ * The peer may have lost the expected ack or not received the
+ * RESTART yet.
+ */
+ pri->pvts[chanpos]->resetting = SIG_PRI_RESET_NO_ACK;
+ break;
+ case SIG_PRI_RESET_NO_ACK:
+ /* The peer likely is not going to ack the RESTART. */
+ ast_debug(1,
+ "Span %d: Second SETUP while waiting for RESTART ACKNOWLEDGE on channel %d/%d\n",
+ pri->span, PRI_SPAN(e->ring.channel), PRI_CHANNEL(e->ring.channel));
+
+ /* Assume we got the ack. */
+ pri->pvts[chanpos]->resetting = SIG_PRI_RESET_IDLE;
+ if (pri->resetting) {
+ /* Go on to the next idle channel to RESTART. */
+ pri_check_restart(pri);
+ }
+ break;
+ }
+ if (!sig_pri_is_chan_available(pri->pvts[chanpos])) {
+ /* This is where we handle initial glare */
+ ast_debug(1,
+ "Span %d: SETUP requested unavailable channel %d/%d. Attempting to renegotiate.\n",
+ pri->span, PRI_SPAN(e->ring.channel), PRI_CHANNEL(e->ring.channel));
+ chanpos = -1;
+ }
+ }
+#if defined(ALWAYS_PICK_CHANNEL)
+ if (e->ring.flexible) {
+ chanpos = -1;
+ }
+#endif /* defined(ALWAYS_PICK_CHANNEL) */
+ if (chanpos < 0 && e->ring.flexible) {
+ /* We can try to pick another channel. */
+ chanpos = pri_find_empty_chan(pri, 1);
+ }
+ }
+ if (chanpos < 0) {
+ if (e->ring.flexible) {
+ pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_NORMAL_CIRCUIT_CONGESTION);
+ } else {
+ pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_REQUESTED_CHAN_UNAVAIL);
+ }
+ goto setup_exit;
+ }
+
+ sig_pri_lock_private(pri->pvts[chanpos]);
+
+ /* Mark channel as in use so noone else will steal it. */
+ pri->pvts[chanpos]->call = e->ring.call;
+
+ /* Use plancallingnum as a scratch buffer since it is initialized next. */
+ apply_plan_to_existing_number(plancallingnum, sizeof(plancallingnum), pri,
+ e->ring.redirectingnum, e->ring.callingplanrdnis);
+ sig_pri_set_rdnis(pri->pvts[chanpos], plancallingnum);
+
+ /* Setup caller-id info */
+ apply_plan_to_existing_number(plancallingnum, sizeof(plancallingnum), pri,
+ e->ring.callingnum, e->ring.callingplan);
+ pri->pvts[chanpos]->cid_ani2 = 0;
+ if (pri->pvts[chanpos]->use_callerid) {
+ ast_shrink_phone_number(plancallingnum);
+ ast_copy_string(pri->pvts[chanpos]->cid_num, plancallingnum,
+ sizeof(pri->pvts[chanpos]->cid_num));
+#ifdef PRI_ANI
+ apply_plan_to_existing_number(plancallingani, sizeof(plancallingani),
+ pri, e->ring.callingani, e->ring.callingplanani);
+ ast_shrink_phone_number(plancallingani);
+ ast_copy_string(pri->pvts[chanpos]->cid_ani, plancallingani,
+ sizeof(pri->pvts[chanpos]->cid_ani));
+#endif
+ pri->pvts[chanpos]->cid_subaddr[0] = '\0';
+#if defined(HAVE_PRI_SUBADDR)
+ if (e->ring.calling.subaddress.valid) {
+ struct ast_party_subaddress calling_subaddress;
+
+ ast_party_subaddress_init(&calling_subaddress);
+ sig_pri_set_subaddress(&calling_subaddress,
+ &e->ring.calling.subaddress);
+ if (calling_subaddress.str) {
+ ast_copy_string(pri->pvts[chanpos]->cid_subaddr,
+ calling_subaddress.str,
+ sizeof(pri->pvts[chanpos]->cid_subaddr));
+ }
+ ast_party_subaddress_free(&calling_subaddress);
+ }
+#endif /* defined(HAVE_PRI_SUBADDR) */
+ ast_copy_string(pri->pvts[chanpos]->cid_name, e->ring.callingname,
+ sizeof(pri->pvts[chanpos]->cid_name));
+ /* this is the callingplan (TON/NPI), e->ring.callingplan>>4 would be the TON */
+ pri->pvts[chanpos]->cid_ton = e->ring.callingplan;
+ pri->pvts[chanpos]->callingpres = e->ring.callingpres;
+ if (e->ring.ani2 >= 0) {
+ pri->pvts[chanpos]->cid_ani2 = e->ring.ani2;
+ }
+ } else {
+ pri->pvts[chanpos]->cid_num[0] = '\0';
+ pri->pvts[chanpos]->cid_subaddr[0] = '\0';
+ pri->pvts[chanpos]->cid_ani[0] = '\0';
+ pri->pvts[chanpos]->cid_name[0] = '\0';
+ pri->pvts[chanpos]->cid_ton = 0;
+ pri->pvts[chanpos]->callingpres = 0;
+ }
+
+ /* Setup the user tag for party id's from this device for this call. */
+ if (pri->append_msn_to_user_tag) {
+ snprintf(pri->pvts[chanpos]->user_tag,
+ sizeof(pri->pvts[chanpos]->user_tag), "%s_%s",
+ pri->initial_user_tag,
+ pri->nodetype == PRI_NETWORK
+ ? plancallingnum : e->ring.callednum);
+ } else {
+ ast_copy_string(pri->pvts[chanpos]->user_tag,
+ pri->initial_user_tag, sizeof(pri->pvts[chanpos]->user_tag));
+ }
+
+ sig_pri_set_caller_id(pri->pvts[chanpos]);
+
+ /* Set DNID on all incoming calls -- even immediate */
+ sig_pri_set_dnid(pri->pvts[chanpos], e->ring.callednum);
+
+ if (pri->pvts[chanpos]->immediate) {
+ /* immediate=yes go to s|1 */
+ ast_verb(3, "Going to extension s|1 because of immediate=yes\n");
+ pri->pvts[chanpos]->exten[0] = 's';
+ pri->pvts[chanpos]->exten[1] = '\0';
+ } else if (!ast_strlen_zero(e->ring.callednum)) {
+ /* Get called number */
+ ast_copy_string(pri->pvts[chanpos]->exten, e->ring.callednum,
+ sizeof(pri->pvts[chanpos]->exten));
+ } else if (pri->overlapdial) {
+ pri->pvts[chanpos]->exten[0] = '\0';
+ } else {
+ /* Some PRI circuits are set up to send _no_ digits. Handle them as 's'. */
+ pri->pvts[chanpos]->exten[0] = 's';
+ pri->pvts[chanpos]->exten[1] = '\0';
+ }
+ /* No number yet, but received "sending complete"? */
+ if (e->ring.complete && (ast_strlen_zero(e->ring.callednum))) {
+ ast_verb(3, "Going to extension s|1 because of Complete received\n");
+ pri->pvts[chanpos]->exten[0] = 's';
+ pri->pvts[chanpos]->exten[1] = '\0';
+ }
+
+ /* Make sure extension exists (or in overlap dial mode, can exist) */
+ exten_exists_or_can_exist = ((pri->overlapdial & DAHDI_OVERLAPDIAL_INCOMING)
+ && ast_canmatch_extension(NULL, pri->pvts[chanpos]->context,
+ pri->pvts[chanpos]->exten, 1, pri->pvts[chanpos]->cid_num))
+ || ast_exists_extension(NULL, pri->pvts[chanpos]->context,
+ pri->pvts[chanpos]->exten, 1, pri->pvts[chanpos]->cid_num);
+ if (!exten_exists_or_can_exist) {
+ ast_verb(3,
+ "Span %d: Extension %s@%s does not exist. Rejecting call from '%s'.\n",
+ pri->span, pri->pvts[chanpos]->exten, pri->pvts[chanpos]->context,
+ pri->pvts[chanpos]->cid_num);
+ pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_UNALLOCATED);
+ pri->pvts[chanpos]->call = NULL;
+ pri->pvts[chanpos]->exten[0] = '\0';
+ sig_pri_unlock_private(pri->pvts[chanpos]);
+ sig_pri_span_devstate_changed(pri);
+ goto setup_exit;
+ }
+
+ /* Select audio companding mode. */
+ switch (e->ring.layer1) {
+ case PRI_LAYER_1_ALAW:
+ law = SIG_PRI_ALAW;
+ break;
+ case PRI_LAYER_1_ULAW:
+ law = SIG_PRI_ULAW;
+ break;
+ default:
+ /* This is a data call to us. */
+ law = SIG_PRI_DEFLAW;
+ break;
+ }
+
+ could_match_more = !e->ring.complete
+ && (pri->overlapdial & DAHDI_OVERLAPDIAL_INCOMING)
+ && ast_matchmore_extension(NULL, pri->pvts[chanpos]->context,
+ pri->pvts[chanpos]->exten, 1, pri->pvts[chanpos]->cid_num);
+
+ need_dialtone = could_match_more
+ /*
+ * Must explicitly check the digital capability this
+ * way instead of checking the pvt->digital flag
+ * because the flag hasn't been set yet.
+ */
+ && !(e->ring.ctype & AST_TRANS_CAP_DIGITAL)
+ && !pri->pvts[chanpos]->no_b_channel
+ && (!strlen(pri->pvts[chanpos]->exten)
+ || ast_ignore_pattern(pri->pvts[chanpos]->context,
+ pri->pvts[chanpos]->exten));
+
+ if (e->ring.complete || !(pri->overlapdial & DAHDI_OVERLAPDIAL_INCOMING)) {
+ /* Just announce proceeding */
+ pri->pvts[chanpos]->call_level = SIG_PRI_CALL_LEVEL_PROCEEDING;
+ pri_proceeding(pri->pri, e->ring.call, PVT_TO_CHANNEL(pri->pvts[chanpos]), 0);
+ } else if (pri->switchtype == PRI_SWITCH_GR303_TMC) {
+ pri->pvts[chanpos]->call_level = SIG_PRI_CALL_LEVEL_CONNECT;
+ pri_answer(pri->pri, e->ring.call, PVT_TO_CHANNEL(pri->pvts[chanpos]), 1);
+ } else {
+ pri->pvts[chanpos]->call_level = SIG_PRI_CALL_LEVEL_OVERLAP;
+#if defined(HAVE_PRI_SETUP_ACK_INBAND)
+ pri_setup_ack(pri->pri, e->ring.call,
+ PVT_TO_CHANNEL(pri->pvts[chanpos]), 1, need_dialtone);
+#else /* !defined(HAVE_PRI_SETUP_ACK_INBAND) */
+ pri_need_more_info(pri->pri, e->ring.call,
+ PVT_TO_CHANNEL(pri->pvts[chanpos]), 1);
+#endif /* !defined(HAVE_PRI_SETUP_ACK_INBAND) */
+ }
+
+ /*
+ * Release the PRI lock while we create the channel so other
+ * threads can send D channel messages. We must also release
+ * the private lock to prevent deadlock while creating the
+ * channel.
+ */
+ sig_pri_unlock_private(pri->pvts[chanpos]);
+ ast_mutex_unlock(&pri->lock);
+ c = sig_pri_new_ast_channel(pri->pvts[chanpos],
+ could_match_more ? AST_STATE_RESERVED : AST_STATE_RING, law, e->ring.ctype,
+ pri->pvts[chanpos]->exten, NULL, NULL);
+ ast_mutex_lock(&pri->lock);
+ sig_pri_lock_private(pri->pvts[chanpos]);
+
+ if (c) {
+ setup_incoming_channel(pri, chanpos, e);
+
+ /* Start PBX */
+ if (could_match_more) {
+#if !defined(HAVE_PRI_SETUP_ACK_INBAND)
+ if (need_dialtone) {
+ /* Indicate that we are providing dialtone. */
+ pri->pvts[chanpos]->progress = 1;/* No need to send plain PROGRESS again. */
+#ifdef HAVE_PRI_PROG_W_CAUSE
+ pri_progress_with_cause(pri->pri, e->ring.call,
+ PVT_TO_CHANNEL(pri->pvts[chanpos]), 1, -1);/* no cause at all */
+#else
+ pri_progress(pri->pri, e->ring.call,
+ PVT_TO_CHANNEL(pri->pvts[chanpos]), 1);
+#endif
+ }
+#endif /* !defined(HAVE_PRI_SETUP_ACK_INBAND) */
+
+ if (!ast_pthread_create_detached(&threadid, NULL, pri_ss_thread,
+ pri->pvts[chanpos])) {
+ ast_verb(3, "Accepting overlap call from '%s' to '%s' on channel %d/%d, span %d\n",
+ plancallingnum, S_OR(pri->pvts[chanpos]->exten, "<unspecified>"),
+ pri->pvts[chanpos]->logicalspan, pri->pvts[chanpos]->prioffset,
+ pri->span);
+ sig_pri_unlock_private(pri->pvts[chanpos]);
+ goto setup_exit;
+ }
+ } else {
+ if (!ast_pbx_start(c)) {
+ ast_verb(3, "Accepting call from '%s' to '%s' on channel %d/%d, span %d\n",
+ plancallingnum, pri->pvts[chanpos]->exten,
+ pri->pvts[chanpos]->logicalspan, pri->pvts[chanpos]->prioffset,
+ pri->span);
+ sig_pri_set_echocanceller(pri->pvts[chanpos], 1);
+ sig_pri_unlock_private(pri->pvts[chanpos]);
+ goto setup_exit;
+ }
+ }
+ }
+ ast_log(LOG_WARNING, "Unable to start PBX on channel %d/%d, span %d\n",
+ pri->pvts[chanpos]->logicalspan, pri->pvts[chanpos]->prioffset, pri->span);
+ if (c) {
+ /* Avoid deadlock while destroying channel */
+ sig_pri_unlock_private(pri->pvts[chanpos]);
+ ast_mutex_unlock(&pri->lock);
+ ast_hangup(c);
+ ast_mutex_lock(&pri->lock);
+ } else {
+ pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_SWITCH_CONGESTION);
+ pri->pvts[chanpos]->call = NULL;
+ sig_pri_unlock_private(pri->pvts[chanpos]);
+ sig_pri_span_devstate_changed(pri);
+ }
+
+setup_exit:;
+ if (callid) {
+ ast_callid_unref(callid);
+ ast_callid_threadassoc_remove();
+ }
+}
+
static void *pri_dchannel(void *vpri)
{
struct sig_pri_span *pri = vpri;
@@ -5758,19 +6231,12 @@
struct pollfd fds[SIG_PRI_NUM_DCHANS];
int res;
int x;
- int law;
- struct ast_channel *c;
struct timeval tv, lowest, *next;
int doidling=0;
char *cc;
time_t t;
int i, which=-1;
int numdchans;
- pthread_t threadid;
- char ani2str[6];
- char plancallingnum[AST_MAX_EXTENSION];
- char plancallingani[AST_MAX_EXTENSION];
- char calledtonstr[10];
struct timeval lastidle = { 0, 0 };
pthread_t p;
struct ast_channel *idle;
@@ -6222,524 +6688,7 @@
break;
#endif /* defined(HAVE_PRI_SERVICE_MESSAGES) */
case PRI_EVENT_RING:
- if (!ast_strlen_zero(pri->msn_list)
- && !sig_pri_msn_match(pri->msn_list, e->ring.callednum)) {
- /* The call is not for us so ignore it. */
- ast_verb(3,
- "Ignoring call to '%s' on span %d. Its not in the MSN list: %s\n",
- e->ring.callednum, pri->span, pri->msn_list);
- pri_destroycall(pri->pri, e->ring.call);
- break;
- }
- if (sig_pri_is_cis_call(e->ring.channel)) {
- sig_pri_handle_cis_subcmds(pri, e->e, e->ring.subcmds,
- e->ring.call);
- break;
- }
- chanpos = pri_find_principle_by_call(pri, e->ring.call);
- if (-1 < chanpos) {
- /* Libpri has already filtered out duplicate SETUPs. */
- ast_log(LOG_WARNING,
- "Span %d: Got SETUP with duplicate call ptr (%p). Dropping call.\n",
- pri->span, e->ring.call);
- pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_NORMAL_TEMPORARY_FAILURE);
- break;
- }
- if (e->ring.channel == -1 || PRI_CHANNEL(e->ring.channel) == 0xFF) {
- /* Any channel requested. */
- chanpos = pri_find_empty_chan(pri, 1);
- if (-1 < chanpos) {
- callid = func_pri_dchannel_new_callid();
- }
- } else if (PRI_CHANNEL(e->ring.channel) == 0x00) {
- /* No channel specified. */
-#if defined(HAVE_PRI_CALL_WAITING)
- if (!pri->allow_call_waiting_calls)
-#endif /* defined(HAVE_PRI_CALL_WAITING) */
- {
- /* We will not accept incoming call waiting calls. */
- pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_NORMAL_CIRCUIT_CONGESTION);
- break;
- }
-#if defined(HAVE_PRI_CALL_WAITING)
- chanpos = pri_find_empty_nobch(pri);
- if (chanpos < 0) {
- /* We could not find/create a call interface. */
- pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_NORMAL_CIRCUIT_CONGESTION);
- break;
- }
-
- callid = func_pri_dchannel_new_callid();
-
- /* Setup the call interface to use. */
- sig_pri_init_config(pri->pvts[chanpos], pri);
-#endif /* defined(HAVE_PRI_CALL_WAITING) */
- } else {
- /* A channel is specified. */
- callid = func_pri_dchannel_new_callid();
- chanpos = pri_find_principle(pri, e->ring.channel, e->ring.call);
- if (chanpos < 0) {
- ast_log(LOG_WARNING,
- "Span %d: SETUP on unconfigured channel %d/%d\n",
- pri->span, PRI_SPAN(e->ring.channel),
- PRI_CHANNEL(e->ring.channel));
- } else {
- switch (pri->pvts[chanpos]->resetting) {
- case SIG_PRI_RESET_IDLE:
- break;
- case SIG_PRI_RESET_ACTIVE:
- /*
- * The peer may have lost the expected ack or not received the
- * RESTART yet.
- */
- pri->pvts[chanpos]->resetting = SIG_PRI_RESET_NO_ACK;
- break;
- case SIG_PRI_RESET_NO_ACK:
- /* The peer likely is not going to ack the RESTART. */
- ast_debug(1,
- "Span %d: Second SETUP while waiting for RESTART ACKNOWLEDGE on channel %d/%d\n",
- pri->span, PRI_SPAN(e->ring.channel),
- PRI_CHANNEL(e->ring.channel));
-
- /* Assume we got the ack. */
- pri->pvts[chanpos]->resetting = SIG_PRI_RESET_IDLE;
- if (pri->resetting) {
- /* Go on to the next idle channel to RESTART. */
- pri_check_restart(pri);
- }
- break;
- }
- if (!sig_pri_is_chan_available(pri->pvts[chanpos])) {
- /* This is where we handle initial glare */
- ast_debug(1,
- "Span %d: SETUP requested unavailable channel %d/%d. Attempting to renegotiate.\n",
- pri->span, PRI_SPAN(e->ring.channel),
- PRI_CHANNEL(e->ring.channel));
- chanpos = -1;
- }
- }
-#if defined(ALWAYS_PICK_CHANNEL)
- if (e->ring.flexible) {
- chanpos = -1;
- }
-#endif /* defined(ALWAYS_PICK_CHANNEL) */
- if (chanpos < 0 && e->ring.flexible) {
- /* We can try to pick another channel. */
- chanpos = pri_find_empty_chan(pri, 1);
- }
- }
- if (chanpos < 0) {
- if (e->ring.flexible) {
- pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_NORMAL_CIRCUIT_CONGESTION);
- } else {
- pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_REQUESTED_CHAN_UNAVAIL);
- }
- break;
- }
-
- sig_pri_lock_private(pri->pvts[chanpos]);
-
- /* Mark channel as in use so noone else will steal it. */
- pri->pvts[chanpos]->call = e->ring.call;
-
- /* Use plancallingnum as a scratch buffer since it is initialized next. */
- apply_plan_to_existing_number(plancallingnum, sizeof(plancallingnum), pri,
- e->ring.redirectingnum, e->ring.callingplanrdnis);
- sig_pri_set_rdnis(pri->pvts[chanpos], plancallingnum);
-
- /* Setup caller-id info */
- apply_plan_to_existing_number(plancallingnum, sizeof(plancallingnum), pri,
- e->ring.callingnum, e->ring.callingplan);
- pri->pvts[chanpos]->cid_ani2 = 0;
- if (pri->pvts[chanpos]->use_callerid) {
- ast_shrink_phone_number(plancallingnum);
- ast_copy_string(pri->pvts[chanpos]->cid_num, plancallingnum, sizeof(pri->pvts[chanpos]->cid_num));
-#ifdef PRI_ANI
- apply_plan_to_existing_number(plancallingani, sizeof(plancallingani),
- pri, e->ring.callingani, e->ring.callingplanani);
- ast_shrink_phone_number(plancallingani);
- ast_copy_string(pri->pvts[chanpos]->cid_ani, plancallingani,
- sizeof(pri->pvts[chanpos]->cid_ani));
-#endif
- pri->pvts[chanpos]->cid_subaddr[0] = '\0';
-#if defined(HAVE_PRI_SUBADDR)
- if (e->ring.calling.subaddress.valid) {
- struct ast_party_subaddress calling_subaddress;
-
- ast_party_subaddress_init(&calling_subaddress);
- sig_pri_set_subaddress(&calling_subaddress,
- &e->ring.calling.subaddress);
- if (calling_subaddress.str) {
- ast_copy_string(pri->pvts[chanpos]->cid_subaddr,
- calling_subaddress.str,
- sizeof(pri->pvts[chanpos]->cid_subaddr));
- }
- ast_party_subaddress_free(&calling_subaddress);
- }
-#endif /* defined(HAVE_PRI_SUBADDR) */
- ast_copy_string(pri->pvts[chanpos]->cid_name, e->ring.callingname, sizeof(pri->pvts[chanpos]->cid_name));
- pri->pvts[chanpos]->cid_ton = e->ring.callingplan; /* this is the callingplan (TON/NPI), e->ring.callingplan>>4 would be the TON */
- pri->pvts[chanpos]->callingpres = e->ring.callingpres;
- if (e->ring.ani2 >= 0) {
- pri->pvts[chanpos]->cid_ani2 = e->ring.ani2;
- }
- } else {
- pri->pvts[chanpos]->cid_num[0] = '\0';
- pri->pvts[chanpos]->cid_subaddr[0] = '\0';
- pri->pvts[chanpos]->cid_ani[0] = '\0';
- pri->pvts[chanpos]->cid_name[0] = '\0';
- pri->pvts[chanpos]->cid_ton = 0;
- pri->pvts[chanpos]->callingpres = 0;
- }
-
- /* Setup the user tag for party id's from this device for this call. */
- if (pri->append_msn_to_user_tag) {
- snprintf(pri->pvts[chanpos]->user_tag,
- sizeof(pri->pvts[chanpos]->user_tag), "%s_%s",
- pri->initial_user_tag,
- pri->nodetype == PRI_NETWORK
- ? plancallingnum : e->ring.callednum);
- } else {
- ast_copy_string(pri->pvts[chanpos]->user_tag,
- pri->initial_user_tag, sizeof(pri->pvts[chanpos]->user_tag));
- }
-
- sig_pri_set_caller_id(pri->pvts[chanpos]);
-
- /* Set DNID on all incoming calls -- even immediate */
- sig_pri_set_dnid(pri->pvts[chanpos], e->ring.callednum);
-
- /* If immediate=yes go to s|1 */
- if (pri->pvts[chanpos]->immediate) {
- ast_verb(3, "Going to extension s|1 because of immediate=yes\n");
- pri->pvts[chanpos]->exten[0] = 's';
- pri->pvts[chanpos]->exten[1] = '\0';
- }
- /* Get called number */
- else if (!ast_strlen_zero(e->ring.callednum)) {
- ast_copy_string(pri->pvts[chanpos]->exten, e->ring.callednum, sizeof(pri->pvts[chanpos]->exten));
- } else if (pri->overlapdial)
- pri->pvts[chanpos]->exten[0] = '\0';
- else {
- /* Some PRI circuits are set up to send _no_ digits. Handle them as 's'. */
- pri->pvts[chanpos]->exten[0] = 's';
- pri->pvts[chanpos]->exten[1] = '\0';
- }
- /* No number yet, but received "sending complete"? */
- if (e->ring.complete && (ast_strlen_zero(e->ring.callednum))) {
- ast_verb(3, "Going to extension s|1 because of Complete received\n");
- pri->pvts[chanpos]->exten[0] = 's';
- pri->pvts[chanpos]->exten[1] = '\0';
- }
-
- /* Make sure extension exists (or in overlap dial mode, can exist) */
- if (((pri->overlapdial & DAHDI_OVERLAPDIAL_INCOMING) && ast_canmatch_extension(NULL, pri->pvts[chanpos]->context, pri->pvts[chanpos]->exten, 1, pri->pvts[chanpos]->cid_num)) ||
- ast_exists_extension(NULL, pri->pvts[chanpos]->context, pri->pvts[chanpos]->exten, 1, pri->pvts[chanpos]->cid_num)) {
- int could_match_more;
- int need_dialtone;
-
- /* Select audio companding mode. */
- switch (e->ring.layer1) {
- case PRI_LAYER_1_ALAW:
- law = SIG_PRI_ALAW;
- break;
- case PRI_LAYER_1_ULAW:
- law = SIG_PRI_ULAW;
- break;
- default:
- /* This is a data call to us. */
- law = SIG_PRI_DEFLAW;
- break;
- }
-
- could_match_more = !e->ring.complete
- && (pri->overlapdial & DAHDI_OVERLAPDIAL_INCOMING)
- && ast_matchmore_extension(NULL, pri->pvts[chanpos]->context,
- pri->pvts[chanpos]->exten, 1, pri->pvts[chanpos]->cid_num);
-
- need_dialtone = could_match_more
- /*
- * Must explicitly check the digital capability this
- * way instead of checking the pvt->digital flag
- * because the flag hasn't been set yet.
- */
- && !(e->ring.ctype & AST_TRANS_CAP_DIGITAL)
- && !pri->pvts[chanpos]->no_b_channel
- && (!strlen(pri->pvts[chanpos]->exten)
- || ast_ignore_pattern(pri->pvts[chanpos]->context,
- pri->pvts[chanpos]->exten));
-
- if (e->ring.complete || !(pri->overlapdial & DAHDI_OVERLAPDIAL_INCOMING)) {
- /* Just announce proceeding */
- pri->pvts[chanpos]->call_level = SIG_PRI_CALL_LEVEL_PROCEEDING;
- pri_proceeding(pri->pri, e->ring.call, PVT_TO_CHANNEL(pri->pvts[chanpos]), 0);
- } else if (pri->switchtype == PRI_SWITCH_GR303_TMC) {
- pri->pvts[chanpos]->call_level = SIG_PRI_CALL_LEVEL_CONNECT;
- pri_answer(pri->pri, e->ring.call, PVT_TO_CHANNEL(pri->pvts[chanpos]), 1);
- } else {
- pri->pvts[chanpos]->call_level = SIG_PRI_CALL_LEVEL_OVERLAP;
-#if defined(HAVE_PRI_SETUP_ACK_INBAND)
- pri_setup_ack(pri->pri, e->ring.call,
- PVT_TO_CHANNEL(pri->pvts[chanpos]), 1, need_dialtone);
-#else /* !defined(HAVE_PRI_SETUP_ACK_INBAND) */
- pri_need_more_info(pri->pri, e->ring.call,
- PVT_TO_CHANNEL(pri->pvts[chanpos]), 1);
-#endif /* !defined(HAVE_PRI_SETUP_ACK_INBAND) */
- }
-
- /* Start PBX */
- if (could_match_more) {
- /*
- * Release the PRI lock while we create the channel so other
- * threads can send D channel messages. We must also release
- * the private lock to prevent deadlock while creating the
- * channel.
- */
- sig_pri_unlock_private(pri->pvts[chanpos]);
- ast_mutex_unlock(&pri->lock);
- c = sig_pri_new_ast_channel(pri->pvts[chanpos],
- AST_STATE_RESERVED, law, e->ring.ctype,
- pri->pvts[chanpos]->exten, NULL, NULL);
- ast_mutex_lock(&pri->lock);
- sig_pri_lock_private(pri->pvts[chanpos]);
- if (c) {
- ast_channel_stage_snapshot(c);
-#if defined(HAVE_PRI_SUBADDR)
- if (e->ring.calling.subaddress.valid) {
- /* Set Calling Subaddress */
- sig_pri_lock_owner(pri, chanpos);
- sig_pri_set_subaddress(
- &ast_channel_caller(pri->pvts[chanpos]->owner)->id.subaddress,
- &e->ring.calling.subaddress);
- if (!e->ring.calling.subaddress.type
- && !ast_strlen_zero(
- (char *) e->ring.calling.subaddress.data)) {
- /* NSAP */
- pbx_builtin_setvar_helper(c, "CALLINGSUBADDR",
- (char *) e->ring.calling.subaddress.data);
- }
- ast_channel_unlock(c);
- }
- if (e->ring.called_subaddress.valid) {
- /* Set Called Subaddress */
- sig_pri_lock_owner(pri, chanpos);
- sig_pri_set_subaddress(
- &ast_channel_dialed(pri->pvts[chanpos]->owner)->subaddress,
- &e->ring.called_subaddress);
- if (!e->ring.called_subaddress.type
- && !ast_strlen_zero(
- (char *) e->ring.called_subaddress.data)) {
- /* NSAP */
- pbx_builtin_setvar_helper(c, "CALLEDSUBADDR",
- (char *) e->ring.called_subaddress.data);
- }
- ast_channel_unlock(c);
- }
-#else
- if (!ast_strlen_zero(e->ring.callingsubaddr)) {
- pbx_builtin_setvar_helper(c, "CALLINGSUBADDR", e->ring.callingsubaddr);
- }
-#endif /* !defined(HAVE_PRI_SUBADDR) */
- if (e->ring.ani2 >= 0) {
- snprintf(ani2str, sizeof(ani2str), "%d", e->ring.ani2);
- pbx_builtin_setvar_helper(c, "ANI2", ani2str);
- }
-
-#ifdef SUPPORT_USERUSER
- if (!ast_strlen_zero(e->ring.useruserinfo)) {
- pbx_builtin_setvar_helper(c, "USERUSERINFO", e->ring.useruserinfo);
- }
-#endif
-
- snprintf(calledtonstr, sizeof(calledtonstr), "%d", e->ring.calledplan);
- pbx_builtin_setvar_helper(c, "CALLEDTON", calledtonstr);
- ast_channel_lock(c);
- ast_channel_dialed(c)->number.plan = e->ring.calledplan;
- ast_channel_unlock(c);
-
- if (e->ring.redirectingreason >= 0) {
- /* This is now just a status variable. Use REDIRECTING() dialplan function. */
- pbx_builtin_setvar_helper(c, "PRIREDIRECTREASON", redirectingreason2str(e->ring.redirectingreason));
- }
-#if defined(HAVE_PRI_REVERSE_CHARGE)
- pri->pvts[chanpos]->reverse_charging_indication = e->ring.reversecharge;
-#endif
-#if defined(HAVE_PRI_SETUP_KEYPAD)
- ast_copy_string(pri->pvts[chanpos]->keypad_digits,
- e->ring.keypad_digits,
- sizeof(pri->pvts[chanpos]->keypad_digits));
-#endif /* defined(HAVE_PRI_SETUP_KEYPAD) */
-
- sig_pri_handle_subcmds(pri, chanpos, e->e, e->ring.subcmds,
- e->ring.call);
-
-#if !defined(HAVE_PRI_SETUP_ACK_INBAND)
- if (need_dialtone) {
- /* Indicate that we are providing dialtone. */
- pri->pvts[chanpos]->progress = 1;/* No need to send plain PROGRESS again. */
-#ifdef HAVE_PRI_PROG_W_CAUSE
- pri_progress_with_cause(pri->pri, e->ring.call,
- PVT_TO_CHANNEL(pri->pvts[chanpos]), 1, -1);/* no cause at all */
-#else
- pri_progress(pri->pri, e->ring.call,
- PVT_TO_CHANNEL(pri->pvts[chanpos]), 1);
-#endif
- }
-#endif /* !defined(HAVE_PRI_SETUP_ACK_INBAND) */
- ast_channel_stage_snapshot_done(c);
- }
- if (c && !ast_pthread_create_detached(&threadid, NULL, pri_ss_thread, pri->pvts[chanpos])) {
- ast_verb(3, "Accepting overlap call from '%s' to '%s' on channel %d/%d, span %d\n",
- plancallingnum, S_OR(pri->pvts[chanpos]->exten, "<unspecified>"),
- pri->pvts[chanpos]->logicalspan, pri->pvts[chanpos]->prioffset, pri->span);
- } else {
- ast_log(LOG_WARNING, "Unable to start PBX on channel %d/%d, span %d\n",
- pri->pvts[chanpos]->logicalspan, pri->pvts[chanpos]->prioffset, pri->span);
- if (c) {
- /* Avoid deadlock while destroying channel */
- sig_pri_unlock_private(pri->pvts[chanpos]);
- ast_mutex_unlock(&pri->lock);
- ast_hangup(c);
- ast_mutex_lock(&pri->lock);
- } else {
- pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_SWITCH_CONGESTION);
- pri->pvts[chanpos]->call = NULL;
- sig_pri_unlock_private(pri->pvts[chanpos]);
- sig_pri_span_devstate_changed(pri);
- }
- break;
- }
- } else {
- /*
- * Release the PRI lock while we create the channel so other
- * threads can send D channel messages. We must also release
- * the private lock to prevent deadlock while creating the
- * channel.
- */
- sig_pri_unlock_private(pri->pvts[chanpos]);
- ast_mutex_unlock(&pri->lock);
- c = sig_pri_new_ast_channel(pri->pvts[chanpos],
- AST_STATE_RING, law, e->ring.ctype,
- pri->pvts[chanpos]->exten, NULL, NULL);
- ast_mutex_lock(&pri->lock);
- sig_pri_lock_private(pri->pvts[chanpos]);
- if (c) {
- /*
- * It is reasonably safe to set the following
- * channel variables while the PRI and DAHDI private
- * structures are locked. The PBX has not been
- * started yet and it is unlikely that any other task
- * will do anything with the channel we have just
- * created.
- */
- ast_channel_stage_snapshot(c);
-#if defined(HAVE_PRI_SUBADDR)
- if (e->ring.calling.subaddress.valid) {
- /* Set Calling Subaddress */
- sig_pri_lock_owner(pri, chanpos);
- sig_pri_set_subaddress(
- &ast_channel_caller(pri->pvts[chanpos]->owner)->id.subaddress,
- &e->ring.calling.subaddress);
- if (!e->ring.calling.subaddress.type
- && !ast_strlen_zero(
- (char *) e->ring.calling.subaddress.data)) {
- /* NSAP */
- pbx_builtin_setvar_helper(c, "CALLINGSUBADDR",
- (char *) e->ring.calling.subaddress.data);
- }
- ast_channel_unlock(c);
- }
- if (e->ring.called_subaddress.valid) {
- /* Set Called Subaddress */
- sig_pri_lock_owner(pri, chanpos);
- sig_pri_set_subaddress(
- &ast_channel_dialed(pri->pvts[chanpos]->owner)->subaddress,
- &e->ring.called_subaddress);
- if (!e->ring.called_subaddress.type
- && !ast_strlen_zero(
- (char *) e->ring.called_subaddress.data)) {
- /* NSAP */
- pbx_builtin_setvar_helper(c, "CALLEDSUBADDR",
- (char *) e->ring.called_subaddress.data);
- }
- ast_channel_unlock(c);
- }
-#else
- if (!ast_strlen_zero(e->ring.callingsubaddr)) {
- pbx_builtin_setvar_helper(c, "CALLINGSUBADDR", e->ring.callingsubaddr);
- }
-#endif /* !defined(HAVE_PRI_SUBADDR) */
- if (e->ring.ani2 >= 0) {
- snprintf(ani2str, sizeof(ani2str), "%d", e->ring.ani2);
- pbx_builtin_setvar_helper(c, "ANI2", ani2str);
- }
-
-#ifdef SUPPORT_USERUSER
- if (!ast_strlen_zero(e->ring.useruserinfo)) {
- pbx_builtin_setvar_helper(c, "USERUSERINFO", e->ring.useruserinfo);
- }
-#endif
-
- if (e->ring.redirectingreason >= 0) {
- /* This is now just a status variable. Use REDIRECTING() dialplan function. */
- pbx_builtin_setvar_helper(c, "PRIREDIRECTREASON", redirectingreason2str(e->ring.redirectingreason));
- }
-#if defined(HAVE_PRI_REVERSE_CHARGE)
- pri->pvts[chanpos]->reverse_charging_indication = e->ring.reversecharge;
-#endif
-#if defined(HAVE_PRI_SETUP_KEYPAD)
- ast_copy_string(pri->pvts[chanpos]->keypad_digits,
- e->ring.keypad_digits,
- sizeof(pri->pvts[chanpos]->keypad_digits));
-#endif /* defined(HAVE_PRI_SETUP_KEYPAD) */
-
- snprintf(calledtonstr, sizeof(calledtonstr), "%d", e->ring.calledplan);
- pbx_builtin_setvar_helper(c, "CALLEDTON", calledtonstr);
- ast_channel_lock(c);
- ast_channel_dialed(c)->number.plan = e->ring.calledplan;
- ast_channel_unlock(c);
-
- sig_pri_handle_subcmds(pri, chanpos, e->e, e->ring.subcmds,
- e->ring.call);
-
- ast_channel_stage_snapshot_done(c);
- }
- if (c && !ast_pbx_start(c)) {
- ast_verb(3, "Accepting call from '%s' to '%s' on channel %d/%d, span %d\n",
- plancallingnum, pri->pvts[chanpos]->exten,
- pri->pvts[chanpos]->logicalspan, pri->pvts[chanpos]->prioffset, pri->span);
- sig_pri_set_echocanceller(pri->pvts[chanpos], 1);
- } else {
- ast_log(LOG_WARNING, "Unable to start PBX on channel %d/%d, span %d\n",
- pri->pvts[chanpos]->logicalspan, pri->pvts[chanpos]->prioffset, pri->span);
- if (c) {
- /* Avoid deadlock while destroying channel */
- sig_pri_unlock_private(pri->pvts[chanpos]);
- ast_mutex_unlock(&pri->lock);
- ast_hangup(c);
- ast_mutex_lock(&pri->lock);
- } else {
- pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_SWITCH_CONGESTION);
- pri->pvts[chanpos]->call = NULL;
- sig_pri_unlock_private(pri->pvts[chanpos]);
- sig_pri_span_devstate_changed(pri);
- }
- break;
- }
- }
- } else {
- ast_verb(3,
- "Span %d: Extension %s@%s does not exist. Rejecting call from '%s'.\n",
- pri->span, pri->pvts[chanpos]->exten, pri->pvts[chanpos]->context,
- pri->pvts[chanpos]->cid_num);
- pri_hangup(pri->pri, e->ring.call, PRI_CAUSE_UNALLOCATED);
- pri->pvts[chanpos]->call = NULL;
- pri->pvts[chanpos]->exten[0] = '\0';
- sig_pri_unlock_private(pri->pvts[chanpos]);
- sig_pri_span_devstate_changed(pri);
- break;
- }
- sig_pri_unlock_private(pri->pvts[chanpos]);
+ sig_pri_handle_setup(pri, e);
break;
case PRI_EVENT_RINGING:
[... 2 lines stripped ...]
More information about the asterisk-commits
mailing list