[asterisk-commits] coreyfarrell: branch 1.8 r409052 - in /branches/1.8: configs/ res/

[SVN commits to the Asterisk project]

Author: coreyfarrell
Date: Thu Feb 27 09:59:15 2014
New Revision: 409052

URL: http://svnview.digium.com/svn/asterisk?view=rev&rev=409052
Log:
res_fax: Warn that minrate=2400 is not valid for V.27 instead of failing load.

Change minrate from 2400 to 4800 on config reload in response to changes from
ASTERISK-22790 only.  Any config with minrate of 2400 that would fail before
r405693 will still fail.

Comment out many settings in res_fax.conf.sample. The defaults are set in
res_fax.c, so setting the same value in sample config does nothing but make
the sample config more fragile.

(closes issue ASTERISK-23231)
Reported by: David Brillert
Review: https://reviewboard.asterisk.org/r/3261/

Modified:
    branches/1.8/configs/res_fax.conf.sample
    branches/1.8/res/res_fax.c

Modified: branches/1.8/configs/res_fax.conf.sample
URL: http://svnview.digium.com/svn/asterisk/branches/1.8/configs/res_fax.conf.sample?view=diff&rev=409052&r1=409051&r2=409052
==============================================================================
--- branches/1.8/configs/res_fax.conf.sample (original)
+++ branches/1.8/configs/res_fax.conf.sample Thu Feb 27 09:59:15 2014
@@ -4,12 +4,12 @@
 ; Maximum Transmission Rate
 ; Possible values are { 2400 | 4800 | 7200 | 9600 | 12000 | 14400 }
 ; Set this value to the maximum desired transfer rate.  Default: 14400
-maxrate=14400
+;maxrate=14400
 
 ; Minimum Transmission Rate
 ; Possible values are { 2400 | 4800 | 7200 | 9600 | 12000 | 14400 }
 ; Set this value to the minimum desired transfer rate.  Default: 4800
-minrate=4800
+;minrate=4800
 
 ; Send Progress/Status events to manager session
 ; Manager events with 'call' class permissions will receive events indicating the
@@ -21,8 +21,8 @@
 ; modem capabilities
 ; Possible values are { v17 | v27 | v29 }
 ; Set this value to modify the default modem options.  Default: v17,v27,v29
-modems=v17,v27,v29
+;modems=v17,v27,v29
 
 ; Enable/disable T.30 ECM (error correction mode) by default.
 ; Default: Enabled
-ecm=yes
+;ecm=yes

Modified: branches/1.8/res/res_fax.c
URL: http://svnview.digium.com/svn/asterisk/branches/1.8/res/res_fax.c?view=diff&rev=409052&r1=409051&r2=409052
==============================================================================
--- branches/1.8/res/res_fax.c (original)
+++ branches/1.8/res/res_fax.c Thu Feb 27 09:59:15 2014
@@ -2738,6 +2738,13 @@
 		goto end;
 	}
 
+	if (options.minrate == 2400 && (options.modems & AST_FAX_MODEM_V27) && !(options.modems & (AST_FAX_MODEM_V34))) {
+		ast_fax_modem_to_str(options.modems, modems, sizeof(modems));
+		ast_log(LOG_WARNING, "'modems' setting '%s' is no longer accepted with 'minrate' setting %d\n", modems, options.minrate);
+		ast_log(LOG_WARNING, "'minrate' has been reset to 4800, please update res_fax.conf.\n");
+		options.minrate = 4800;
+	}
+
 	if (check_modem_rate(options.modems, options.minrate)) {
 		ast_fax_modem_to_str(options.modems, modems, sizeof(modems));
 		ast_log(LOG_ERROR, "'modems' setting '%s' is incompatible with 'minrate' setting %d\n", modems, options.minrate);