[asterisk-commits] qwell: branch 10-digiumphones r365264 - in /branches/10-digiumphones: ./ addo...
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Thu May 3 15:07:37 CDT 2012
Author: qwell
Date: Thu May 3 15:06:49 2012
New Revision: 365264
URL: http://svnview.digium.com/svn/asterisk?view=rev&rev=365264
Log:
Multiple revisions 361208,361211,361270,361330,361333,361381,361422,361472,361522,361560,361607,361658,361706,361754,361804,361855,361907,361956,361981,362080,362084,362152,362202,362205,362264,362305,362356-362357,362360,362364,362377,362429,362496,362537,362587,362678,362681,362730,362816,362869,362918,362998,363212,363376,363429,363688,363734,363789,363876,363935,363987,364047,364065,364109,364163,364204,364259,364285,364342,364365,364369,364536,364579,364650-364651,364777,364787,364845,364900,364903,364965,365014,365083
........
r361208 | jrose | 2012-04-04 14:30:09 -0500 (Wed, 04 Apr 2012) | 10 lines
Make 'help devstate change' display properly (get rid of excess comma)
(closes issue ASTERISK-19444)
Reported by: Makoto Dei
Patches:
devstate-change-usage-truncate.patch uploaded by Makoto Dei (license 5027)
........
Merged revisions 361201 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361211 | jrose | 2012-04-04 15:00:23 -0500 (Wed, 04 Apr 2012) | 12 lines
Fix some stuff involving calls to memcpy and memset
The important parts of the patch were already applied through other updates.
(closes issue ASTERISK-19445)
Reported by: Makoto Dei
Patches:
memset-memcpy-length.patch uploaded by Makoto Dei (license 5027)
........
Merged revisions 361210 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361270 | jrose | 2012-04-05 11:53:35 -0500 (Thu, 05 Apr 2012) | 10 lines
Fix MusicOnHold in MeetMe so that it always uses the class if it's been defined
There were a few instances of restarting music on hold in meetme that would cause
Asterisk to revert to the default class of music on hold for no adequate reason.
Review: https://reviewboard.asterisk.org/r/1844/
........
Merged revisions 361269 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361330 | kmoore | 2012-04-06 08:31:51 -0500 (Fri, 06 Apr 2012) | 11 lines
Remove unnecessary error message in app_dial.c
The error message for failure to stop autoservice after a gosub or macro call
during a dial was removed for macro while Asterisk 1.4 was still being actively
developed. The corresponding gosub error message was never removed.
(closes issue ASTERISK-19551)
........
Merged revisions 361329 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361333 | mjordan | 2012-04-06 09:01:33 -0500 (Fri, 06 Apr 2012) | 11 lines
Fix a typo in the warning messages for an ignored media stream
Added a '\n' to the warning messages when we ignore a media stream due to the
port number being '0'.
(closes issue ASTERISK-19646)
Reported by: Badalian Vyacheslav
........
Merged revisions 361332 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361381 | russell | 2012-04-06 10:49:19 -0500 (Fri, 06 Apr 2012) | 5 lines
Remove a few more files related to chan_usbradio and app_rpt.
........
Merged revisions 361380 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361422 | pabelanger | 2012-04-06 11:31:18 -0500 (Fri, 06 Apr 2012) | 14 lines
Multiple revisions 361403,361412
........
r361403 | pabelanger | 2012-04-06 12:24:36 -0400 (Fri, 06 Apr 2012) | 2 lines
Fix typo in svn:keywords
........
r361412 | pabelanger | 2012-04-06 12:27:30 -0400 (Fri, 06 Apr 2012) | 2 lines
Fix typo in svn:keywords
........
Merged revisions 361403,361412 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361472 | kmoore | 2012-04-06 13:13:04 -0500 (Fri, 06 Apr 2012) | 5 lines
Add missing newlines to CLI logging
........
Merged revisions 361471 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361522 | rmudgett | 2012-04-06 14:47:29 -0500 (Fri, 06 Apr 2012) | 8 lines
Don't add an empty MESSAGE_DATA(key) header if it doesn't already exist.
Doing Set(MESSAGE_DATA(key)=) would add an empty key header if the key
header did not already exist. If it already existed it would delete it.
* Made msg_set_var_full() exit early if the named variable did not already
exist and the value to set is empty.
........
r361560 | mjordan | 2012-04-06 15:32:13 -0500 (Fri, 06 Apr 2012) | 13 lines
Fix memory leak when using MeetMeAdmin 'e' option with user specified
A memory leak/reference counting leak occurs if the MeetMeAdmin 'e' command
(eject last user that joined) is used in conjunction with a specified user.
Regardless of the command being executed, if a user is specified for the
command, MeetMeAdmin will look up that user. Because the 'e' option kicks
the last user that joined, as opposed to the one specified, the reference to
the user specified by the command would be leaked when the user variable
was assigned to the last user that joined.
........
Merged revisions 361558 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361607 | mjordan | 2012-04-06 17:00:11 -0500 (Fri, 06 Apr 2012) | 12 lines
Fix memory leak in res_calendar_ews when event email address node is empty
If the XML calendar data returned by a Microsoft Exchange Web Service
specifies an XML Event E-Mail Address ("EmailAddress"), and no e-mail address
is provided, a condition existed where an ast_calendar_attendee struct would
be allocated but not appended to the list of attendees. Because of that,
the memory associated with the attendee would never be freed. This patch
frees the memory if no e-mail address is provided.
........
Merged revisions 361606 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361658 | mjordan | 2012-04-09 14:42:53 -0500 (Mon, 09 Apr 2012) | 15 lines
Change SHARED function to use a safe traversal when modifying a variable
When the SHARED function modifies a variable, it removes it from its list of
variables and reinserts the new value at the head of the list of variables.
Doing this inside a standard list traversal can be dangerous, as the
standard list traversal does not account for the list being changed. While
the code in question should not cause a use after free violation due to its
breaking out of the loop after freeing the variable, it could lead to a
maintenance issue if the loop was modified. This also fixes a violation
reported by a static analysis tool, which also makes this code easier to
maintain in the future.
........
Merged revisions 361657 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361706 | mjordan | 2012-04-09 15:54:55 -0500 (Mon, 09 Apr 2012) | 17 lines
Prevent invalid access of free'd memory if DAHDI channel during an MWI event
In the MWI processing loop, when a valid event occurs the temporary caller ID
information is deallocated. If a new DAHDI channel is successfully created,
the event is passed up to the analog_ss_thread without error and the loop
exits. If, however, the DAHDI channel is not created, then the caller ID
struct has been free'd, and the gains reset to their previous level. This
will almost certainly cause an invalid access to the free'd memory, either
in subsequent calls to callerid_free or calls to callerid_feed.
This patch makes it so that we only free the caller ID structure if a
DAHDI channel is successfully created, and we bump the gains back up
if we fail to make a DAHDI channel.
........
Merged revisions 361705 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361754 | mjordan | 2012-04-09 16:44:30 -0500 (Mon, 09 Apr 2012) | 12 lines
Allow func_curl to exit gracefully if list allocation fails during write
If the global_curl_info data structure could not be allocated, the
datastore associated with the operation would be free'd, but the function
would not return. This would later dereference the datastore, almost
certainly causing Asterisk to crash. With this patch, if the data
structure is not allocated the method will return an error code, and
not attempt any further operation.
........
Merged revisions 361753 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361804 | mjordan | 2012-04-10 14:57:30 -0500 (Tue, 10 Apr 2012) | 10 lines
Fix crash caused by unloading or reloading of res_http_post
When unlinking itself from the registered HTTP URIs, res_http_post could
inadvertently free all URIs registered with the HTTP server. This patch
modifies the unregister method to only free the URI that is actually
being unregistered, as opposed to all of them.
........
Merged revisions 361803 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361855 | rmudgett | 2012-04-10 16:47:42 -0500 (Tue, 10 Apr 2012) | 19 lines
Prevent invalid access of free'd memory if DAHDI channel during an MWI event
In the MWI processing loop, when a valid event occurs the temporary caller ID
information is deallocated. If a new DAHDI channel is successfully created,
the event is passed up to the analog_ss_thread without error and the loop
exits. If, however, the DAHDI channel is not created, then the caller ID
struct has been free'd, and the gains reset to their previous level. This
will almost certainly cause an invalid access to the free'd memory, either
in subsequent calls to callerid_free or calls to callerid_feed.
* Rework the -r361705 patch to better manage the cs and mtd allocated
resources.
* Fixed use of mwimonitoractive flag to be correct if the mwi_thread()
fails to start.
........
Merged revisions 361854 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361907 | jrose | 2012-04-11 11:07:50 -0500 (Wed, 11 Apr 2012) | 10 lines
Change default value of 'ignorebusy' on Queue members so that behavior is more like 1.8
Prior to this patch, in order to restore that behavior, a function would have
to be used on the QueueMember to make the ringinuse option do anything, which
is pretty unreasonable.
(closes issue ASTERISK-19536)
reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1860/
........
r361956 | kmoore | 2012-04-12 10:01:13 -0500 (Thu, 12 Apr 2012) | 13 lines
Simplify build system architecture optimization
This change to the build system rips out any usage of PROC along with
architecture-specific optimizations in favor of using -march=native where it is
supported. This fixes broken builds on 64bit Intel systems and results in
better optimized code on systems running GCC 4.2+.
Review: https://reviewboard.asterisk.org/r/1852/
(closes issue ASTERISK-19462)
........
Merged revisions 361955 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r361981 | kmoore | 2012-04-12 11:22:28 -0500 (Thu, 12 Apr 2012) | 12 lines
Make trunkfreq take effect when set
Previously, setting trunkfreq had no effect on initial load or on reload and
only ever used the default value. This causes trunkfreq to be used
appropriately on initial load and reload.
(closes issue ASTERISK-19521)
Patch-by: Jaco Kroon
........
Merged revisions 361972 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362080 | jrose | 2012-04-13 10:30:22 -0500 (Fri, 13 Apr 2012) | 10 lines
Send relative path named recordings to the meetme directory instead of sounds
Prior to this patch, no effort was made to parse the path name to determine a proper
destination for recordings of MeetMe's r option. This fixes that.
Review: https://reviewboard.asterisk.org/r/1846/
........
Merged revisions 362079 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362084 | jrose | 2012-04-13 11:04:22 -0500 (Fri, 13 Apr 2012) | 15 lines
Make ForkCDR e option not set end time of the newly forked CDR log
Prior to this patch, ForkCDR's e option would immediately set the end time of the forked
CDR to that of the CDR that is being terminated. This resulted in the new CDR's end time
being roughly the same as it's beginning time (which is in turn roughly the same as the
original's end time).
(closes issue ASTERISK-19164)
Reported by: Steve Davies
Patches:
cdr_fork_end.v10.patch uploaded by Steve Davies (license 5012)
........
Merged revisions 362082 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362152 | mjordan | 2012-04-16 14:39:32 -0500 (Mon, 16 Apr 2012) | 19 lines
Check for IO stream failures in various format's truncate/seek operations
For the formats that support seek and/or truncate operations, many of
the C library calls used to determine or set the current position indicator
in the file stream were not being checked. In some situations, if an error
occurred, a negative value would be returned from the library call. This
could then be interpreted inappropriately as positional data.
This patch checks the return values from these library calls before
using them in subsequent operations.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362151 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362202 | mjordan | 2012-04-16 16:40:29 -0500 (Mon, 16 Apr 2012) | 18 lines
Fix handling of negative return code when storing voicemails in ODBC storage
When storing a voicemail message using an ODBC connection to a database, the
voicemail message is first stored on disk. The sound file associated with
the message is read into memory before being transmitted to the database.
When this occurs, a failure in the C library's lseek function would cause a
negative value to be passed to the mmap as the size of the memory map to
create. This would almost certainly cause the creation of the memory map to
fail, resulting in the message being lost.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863
........
Merged revisions 362201 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362205 | mjordan | 2012-04-16 16:57:19 -0500 (Mon, 16 Apr 2012) | 25 lines
Fix negative return handling in channel drivers
In chan_agent, while handling a channel indicate, the agent channel driver
must obtain a lock on both the agent channel, as well as the channel the
agent channel is using. To do so, it attempts to lock the other channel
first, then unlock the agent channel which is locked prior to entry into
the indicate handler. If this unlock fails with a negative return value,
which can occur if the object passed to agent_indicate is an invalid ao2
object or is NULL, the return value is passed directly to strerror, which
can only accept positive integer values.
In chan_dahdi, the return value of dahdi_get_index is used to directly
index into the sub-channel array. If dahd_get_index returns a negative
value, it would use that value to index into the array, which could cause
an invalid memory access. If dahdi_get_index returns a negative number,
we now default to SUB_REAL.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362204 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362264 | elguero | 2012-04-17 09:53:04 -0500 (Tue, 17 Apr 2012) | 23 lines
Turn off warning message when bind address is set to any.
When a bind address is set to an ANY address (udpbindport=::), a warning message
is displayed stating that "Address remapping activated in sip.conf but we're
using IPv6, which doesn't need it. Please remove 'localnet' and/or 'externaddr'
settings." But if one is running dual stack, we shouldn't be told to turn those
settings off.
This patch checks if the bind address is an ANY address or not. The warning
message will now only be displayed if the bind address is NOT an ANY address and
IPv6 is being used.
Also, updated the copyright year.
(closes issue ASTERISK-19456)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
chan_sip_ipv6_message.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 362253 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362305 | mjordan | 2012-04-17 13:27:44 -0500 (Tue, 17 Apr 2012) | 15 lines
Fix error that caused seek format operations to set max file size to '1' or '0'
A very inappropriate placement of a ')' (introduced in r362151) caused the
maximum size of a file to be set as the result of a comparison operation, as
opposed to the result of the ftello operation. This resulted in seeking being
restricted to the beginning of the file, or 1 byte into the file. Thanks to
the Asterisk Test Suite for properly freaking out about this on at least one
test.
(issue ASTERISK-19655)
Reported by: Matt Jordan
........
Merged revisions 362304 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362356 | mjordan | 2012-04-17 15:56:05 -0500 (Tue, 17 Apr 2012) | 17 lines
Fix places where a negative return from ftello could be used as invalid input
In a variety of locations in both reading and writing a file, the result
from the C library function ftello is used as input to other functions. For
the parameters and functions in question, a negative value is invalid input.
This patch checks the return value from the ftello function to determine if
we were able to determine the current position in the file stream and, if not,
fail gracefully.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362355 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362357 | jrose | 2012-04-17 15:57:36 -0500 (Tue, 17 Apr 2012) | 12 lines
Make use of va_args more appropriate to form in various res_config modules plus utils.
A number of va_copy operations weren't matched with a corresponding va_end in res_config_odbc. Also, there was a potential for va_end to be invoked twice on the same va_arg in utils, which would mean invoking va_end on an undefined variable... which is bad.
va_end is removed from various functions in config_pgsql and config_curl since they aren't making their own copy. The invokers of those functions are responsible for calling va_end on them.
(issue ASTERISK-19451)
Reported by: Walter Doekes
Review: https://reviewboard.asterisk.org/r/1848/
........
Merged revisions 362354 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362360 | mjordan | 2012-04-17 16:07:29 -0500 (Tue, 17 Apr 2012) | 24 lines
Fix places in main where a negative return value could impact execution
This patch addresses a number of modules in main that did not handle the
negative return value from function calls adequately, or were not sufficiently
clear that the conditions leading to improper handling of the return values
could not occur. This includes:
* asterisk.c: A negative return value from the read function would be used
directly as an index into a buffer. We now check for success of the read
function prior to using its result as an index.
* manager.c: Check for failures in mkstemp and lseek when handling the
temporary file created for processing data returned from a CLI command in
action_command. Also check that the result of an lseek is sanitized prior
to using it as the size of a memory map to allocate.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362359 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362364 | mjordan | 2012-04-17 16:11:25 -0500 (Tue, 17 Apr 2012) | 29 lines
Fix places in resources where a negative return value could impact execution
This patch addresses a number of modules in resources that did not handle the
negative return value from function calls adequately. This includes:
* res_agi.c: if the result of the read function is a negative number,
indicating some failure, the result would instead be treated as the number
of bytes read. This patch now treats negative results in the same manner
as an end of file condition, with the exception that it also logs the
error code indicated by the return.
* res_musiconhold.c: if spawn_mp3 fails to assign a file descriptor to srcfd,
and instead assigns a negative value, that file descriptor could later be
passed to functions that require a valid file descriptor. If spawn_mp3 fails,
we now immediately retry instead of continuing in the logic.
* res_rtp_asterisk.c: if no codec can be matched between two RTP instances
in a peer to peer bridge, we immediately return instead of attempting to
use the codec payload type as an index to determine the appropriate negotiated
codec.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362362 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362377 | mjordan | 2012-04-17 16:22:37 -0500 (Tue, 17 Apr 2012) | 13 lines
Handle case where an unknown format is used to get the preferred codec size
In ast_codec_pref_getsize, if an unknown format is passed to the method,
no preferred codec will be selected and a negative number will be used to
index into the format list. The method now logs an unknown format as a
warning, and returns an empty format list.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
r362429 | rmudgett | 2012-04-18 11:27:51 -0500 (Wed, 18 Apr 2012) | 19 lines
Add ability to ignore layer 1 alarms for BRI PTMP lines.
Several telcos bring the BRI PTMP layer 1 down when the line is idle.
When layer 1 goes down, Asterisk cannot make outgoing calls. Incoming
calls could fail as well because the alarm processing is handled by a
different code path than the Q.931 messages.
* Add the layer1_presence configuration option to ignore layer 1 alarms
when the telco brings layer 1 down. This option can be configured by span
while the similar DAHDI driver teignorered=1 option is system wide. This
option unlike layer2_persistence does not require libpri v1.4.13 or newer.
Related to JIRA AST-598
JIRA ABE-2845
........
Merged revisions 362428 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362496 | mjordan | 2012-04-18 21:27:08 -0500 (Wed, 18 Apr 2012) | 50 lines
Fix a variety of potential buffer overflows
* chan_mobile: Fixed an overrun where the cind_state buffer (an integer array
of size 16) would be overrun due to improper bounds checking. At worst, the
buffer can be overrun by a total of 48 bytes (assuming 4-byte integers),
which would still leave it within the allocated memory of struct hfp. This
would corrupt other elements in that struct but not necessarily cause any
further issues.
* app_sms: The array imsg is of size 250, while the array (ud) that the data
is copied into is of size 160. If the size of the inbound message is
greater then 160, up to 90 bytes could be overrun in ud. This would corrupt
the user data header (array udh) adjacent to ud.
* chan_unistim: A number of invalid memmoves are corrected. These would move
data (which may or may not be valid) into the ends of these buffers.
* asterisk: ast_console_toggle_loglevel does not check that the console log
level being set is less then or equal to the allowed log levels of 32.
* format_pref: In ast_codec_pref_prepend, if any occurrence of the specified
codec is not found, the value used to index into the array pref->order
would be one greater then the maximum size of the array.
* jitterbuf: If the element being placed into the jitter buffer lands in the
last available slot in the jitter history buffer, the insertion sort attempts
to move the last entry in the buffer into one slot past the maximum length
of the buffer. Note that this occurred for both the min and max jitter
history buffers.
* tdd: If a read from fsk_serial returns a character that is greater then 32,
an attempt to read past one of the statically defined arrays containing the
values that character maps to would occur.
* localtime: struct ast_time and tm are not the same size - ast_time is larger,
although it contains the elements of tm within it in the same layout. Hence,
when using memcpy to copy the contents of tm into ast_time, the size of tm
should be used, as opposed to the size of ast_time.
* extconf: this treats ast_timing's minmask array as if it had a length of 48,
when it has defined the size of the array as 24. pbx.h defines minmask as
having a size of 48.
(issue ASTERISK-19668)
Reported by: Matt Jordan
........
Merged revisions 362485 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362537 | twilson | 2012-04-19 09:31:59 -0500 (Thu, 19 Apr 2012) | 14 lines
Handle multiple commands per connection via netconsole
Asterisk would accept multiple NULL-delimited CLI commands via the
netconsole socket, but would occasionally miss a command due to the
command not being completely read into the buffer. This patch ensures
that any partial commands get moved to the front of the read buffer,
appended to, and properly sent.
(closes issue ASTERISK-18308)
Review: https://reviewboard.asterisk.org/r/1876/
........
Merged revisions 362536 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362587 | seanbright | 2012-04-19 11:04:21 -0500 (Thu, 19 Apr 2012) | 12 lines
Prevent a crash in ExternalIVR when the 'S' command is sent first.
If the first command sent from an ExternalIVR client is an 'S' command, we were
blindly removing the first element from the play list and deferencing it, even
if it was NULL. This corrects that and also locks appropriately in one place.
(issue ASTERISK-17889)
Reported by: Chris Maciejewski
........
Merged revisions 362586 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362678 | rmudgett | 2012-04-19 16:00:21 -0500 (Thu, 19 Apr 2012) | 5 lines
Update membermacro and membergosub documentation in queues.conf.sample.
........
Merged revisions 362677 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362681 | elguero | 2012-04-19 16:11:35 -0500 (Thu, 19 Apr 2012) | 9 lines
Add leading and trailing backslashes
A couple of unit tests did not have have leading or trailing backslashes when
setting their test category resulting in a warning message being displayed.
Added the backslash where needed.
........
Merged revisions 362680 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362730 | wdoekes | 2012-04-19 16:59:43 -0500 (Thu, 19 Apr 2012) | 5 lines
Fix documentation for ${VERSION(ASTERISK_VERSION_NUM)}.
........
Merged revisions 362729 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362816 | twilson | 2012-04-20 09:49:42 -0500 (Fri, 20 Apr 2012) | 13 lines
Document Speech* apps hangup on failure and suggest TryExec
The Speech API apps return -1 on failure, which will hang up the channel. This
may not be desirable behavior for some, but it isn't something that can be
changed without breaking people's dialplans or writing an option to all of the
Speech apps that does what TryExec already does. This patch documents the
hangup behavior of the apps, and suggests TryExec as the solution.
(closes issue AST-813)
........
Merged revisions 362815 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362869 | twilson | 2012-04-20 11:12:34 -0500 (Fri, 20 Apr 2012) | 11 lines
OpenBSD doesn't have rawmemchr, use strchr
(closes issue ASTERISK-19758)
Reported by: Barry Miller
Tested by: Terry Wilson
Patches:
362758-diff uploaded by Barry Miller (license 5434)
........
Merged revisions 362868 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r362918 | elguero | 2012-04-20 11:47:51 -0500 (Fri, 20 Apr 2012) | 11 lines
Add missing payload type to events API
The Security Events Framework API was changed while adding the generation of
security events in chan_sip. A payload type and name was missed from being
added to struct ie_maps.
(closes issue ASTERISK-19759)
Reported by: Michael L. Young
Patches:
issue-asterisk-19759.diff uploaded by Michael L. Young (license 5026)
........
r362998 | rmudgett | 2012-04-20 20:45:13 -0500 (Fri, 20 Apr 2012) | 5 lines
Update app_dial M and U option GOTO return value documentation.
........
Merged revisions 362997 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r363212 | tilghman | 2012-04-23 11:06:53 -0500 (Mon, 23 Apr 2012) | 8 lines
On some platforms, O_RDONLY is not a flag to be checked, but merely the absence of O_RDWR and O_WRONLY.
The POSIX specification does not mandate how these 3 flags must be specified,
only that one of the three must be specified in every call.
........
Merged revisions 363209 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r363376 | rmudgett | 2012-04-24 19:01:21 -0500 (Tue, 24 Apr 2012) | 5 lines
Hangup affected channel in error paths of bridge_call_thread().
........
Merged revisions 363375 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r363429 | rmudgett | 2012-04-24 20:23:08 -0500 (Tue, 24 Apr 2012) | 27 lines
Fix recalled party B feature flags for a failed DTMF atxfer.
1) B calls A with Dial option T
2) B DTMF atxfer to C
3) B hangs up
4) C does not answer
5) B is called back
6) B answers
7) B cannot initiate transfers anymore
* Add dial features datastore to recalled party B channel that is a copy
of the original party B channel's dial features datastore.
* Extracted add_features_datastore() from add_features_datastores().
* Renamed struct ast_dial_features features_caller and features_callee
members to my_features and peer_features respectively. These better names
eliminate the need for some explanatory comments.
* Simplified code accessing the struct ast_dial_features datastore.
(closes issue ASTERISK-19383)
Reported by: lgfsantos
........
Merged revisions 363428 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r363688 | rmudgett | 2012-04-25 14:47:44 -0500 (Wed, 25 Apr 2012) | 19 lines
Clear ISDN channel resetting state if the peer continues to use it.
Some ISDN switches occasionally fail to send a RESTART ACKNOWLEDGE in
response to a RESTART request.
* Made the second SETUP received after sending a RESTART request clear the
channel resetting state as if the peer had sent the expected RESTART
ACKNOWLEDGE before continuing to process the SETUP. The peer may not be
sending the expected RESTART ACKNOWLEDGE.
(issue ASTERISK-19608)
(issue AST-844)
(issue AST-815)
Patches:
jira_ast_815_v1.8.patch (license #5621) patch uploaded by rmudgett (modified)
........
Merged revisions 363687 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r363734 | rmudgett | 2012-04-25 15:48:22 -0500 (Wed, 25 Apr 2012) | 18 lines
Make DAHDISendCallreroutingFacility wait 5 seconds for a reply before disconnecting the call.
Some switches may not handle the call-deflection/call-rerouting message if
the call is disconnected too soon after being sent. Asteisk was not
waiting for any reply before disconnecting the call.
* Added a 5 second delay before disconnecting the call to wait for a
potential response if the peer does not disconnect first.
(closes issue ASTERISK-19708)
Reported by: mehdi Shirazi
Patches:
jira_asterisk_19708_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
........
Merged revisions 363730 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r363789 | rmudgett | 2012-04-25 17:59:46 -0500 (Wed, 25 Apr 2012) | 5 lines
Update Pickup application documentation.
........
Merged revisions 363788 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r363876 | rmudgett | 2012-04-25 22:11:45 -0500 (Wed, 25 Apr 2012) | 5 lines
Update Pickup application documentation. (Even better)
........
Merged revisions 363875 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r363935 | alecdavis | 2012-04-26 04:46:38 -0500 (Thu, 26 Apr 2012) | 14 lines
chan_sip: [general] maxforwards, not checked for a value greater than 255
The peer maxforwards is checked for both '< 1' and '> 255',
but the default 'maxforwards' in the [general] section is only checked for '< 1'
alecdavis (license 585)
Reported by: alecdavis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1888/
........
Merged revisions 363934 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r363987 | kmoore | 2012-04-26 08:27:34 -0500 (Thu, 26 Apr 2012) | 15 lines
Fix reference leaks involving SIP Replaces transfers
The reference held for SIP blind transfers using the Replaces header in an
INVITE was never freed on success and also failed to be freed in some error
conditions. This caused a file descriptor leak since the RTP structures in use
at the time of the transfer were never freed. This reference leak and another
relating to subscriptions in the same code path have now been corrected.
(Closes issue ASTERISK-19579)
Reported by: Maciej Krajewski
Tested by: Maciej Karjewski
........
Merged revisions 363986 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r364047 | twilson | 2012-04-26 14:30:55 -0500 (Thu, 26 Apr 2012) | 8 lines
Add more constness to the end_buf pointer in the netconsole
issue ASTERISK-18308
Review: https://reviewboard.asterisk.org/r/1876/
........
Merged revisions 364046 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r364065 | rmudgett | 2012-04-26 15:25:05 -0500 (Thu, 26 Apr 2012) | 24 lines
Fix DTMF atxfer running h exten after the wrong bridge ends.
When party B does an attended transfer of party A to party C, the
attending bridge between party B and C should not be running an h exten
when the bridge ends. Running an h exten now sets a softhangup flag to
ensure that an AGI will run in dead AGI mode.
* Set the AST_FLAG_BRIDGE_HANGUP_DONT on the party B channel for the
attending bridge between party B and C.
(closes issue AST-870)
(closes issue ASTERISK-19717)
Reported by: Mario
(closes issue ASTERISK-19633)
Reported by: Andrey Solovyev
Patches:
jira_asterisk_19633_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett, Andrey Solovyev, Mario
........
Merged revisions 364060 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r364109 | rmudgett | 2012-04-26 16:10:46 -0500 (Thu, 26 Apr 2012) | 5 lines
Update Pickup application documentation. (With feeling this time.)
........
Merged revisions 364108 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r364163 | schmidts | 2012-04-27 07:54:19 -0500 (Fri, 27 Apr 2012) | 3 lines
fix a wrong behavior of alarm timezones in caldav and icalendar when an alarm doesnt use utc. This change uses the same timezone from the start time.
........
r364204 | mjordan | 2012-04-27 09:44:13 -0500 (Fri, 27 Apr 2012) | 23 lines
Allow for reloading SRTP crypto keys within the same SIP dialog
As a continuation of the patch in r356604, which allowed for the
reloading of SRTP keys in re-INVITE transfer scenarios, this patch
addresses the more common case where a new key is requested within
the context of a current SIP dialog. This can occur, for example, when
certain phones request a SIP hold.
Previously, once a dialog was associated with an SRTP object, any
subsequent attempt to process crypto keys in any SDP offer - either
the current one or a new offer in a new SIP request - were ignored. This
patch changes this behavior to only ignore subsequent crypto keys within
the current SDP offer, but allows future SDP offers to change the keys.
(issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Review: https://reviewboard.asteriskorg/r/1885/
........
Merged revisions 364203 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r364259 | kmoore | 2012-04-27 13:58:34 -0500 (Fri, 27 Apr 2012) | 14 lines
Allow SIP pvts involved in Replaces transfers to fall out of reference sooner
Unref the SIP pvt stored in the refer structure as soon as it is no longer
needed so that the pvt and associated file descriptors can be freed sooner.
This change makes a reference decrement unnecessary in code that handles SIP
BYE/Also transfers which should not touch the reference anyway.
(Closes issue ASTERISK-19579)
Reported by: Maciej Krajewski
Tested by: Maciej Krajewski
........
Merged revisions 364258 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r364285 | mjordan | 2012-04-27 14:30:19 -0500 (Fri, 27 Apr 2012) | 43 lines
Prevent overflow in calculation in ast_tvdiff_ms on 32-bit machines
The method ast_tvdiff_ms attempts to calculate the difference, in milliseconds,
between two timeval structs, and return the difference in a 64-bit integer.
Unfortunately, it assumes that the long tv_sec/tv_usec members in the timeval
struct are large enough to hold the calculated values before it returns. On
64-bit machines, this might be the case, as a long may be 64-bits. On 32-bit
machines, however, a long may be less (32-bits), in which case, the calculation
can overflow.
This overflow caused significant problems in MixMonitor, which uses the method
to determine if an audio factory, which has not presented audio to an audiohook,
is merely late in providing said audio or will never provide audio. In an
overflow situation, the audiohook would incorrectly determine that an audio
factory that will never provide audio is merely late instead. This led to
situations where a MixMonitor never recorded any audio. Note that this happened
most frequently when that MixMonitor was started by the ConfBridge application
itself, or when the MixMonitor was attached to a Local channel.
(issue ASTERISK-19497)
Reported by: Ben Klang
Tested by: Ben Klang
Patches:
32-bit-time-overflow-10-2012-04-26.diff (license #6283) by mjordan
(closes issue ASTERISK-19727)
Reported by: Mark Murawski
Tested by: Michael L. Young
Patches:
32-bit-time-overflow-2012-04-27.diff (license #6283) by mjordan)
(closes issue ASTERISK-19471)
Reported by: feyfre
Tested by: feyfre
(issue ASTERISK-19426)
Reported by: Johan Wilfer
Review: https://reviewboard.asterisk.org/r/1889/
........
Merged revisions 364277 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r364342 | mmichelson | 2012-04-27 16:58:06 -0500 (Fri, 27 Apr 2012) | 10 lines
Don't attempt to make use of the dynamic_exclude_static ACL if DNS lookup fails.
(closes issue ASTERISK-18321)
Reported by Dan Lukes
Patches:
[... 6475 lines stripped ...]
More information about the asterisk-commits
mailing list