[asterisk-commits] mjordan: branch 1.8 r359356 - /branches/1.8/main/jitterbuf.c
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Wed Mar 14 12:32:06 CDT 2012
Author: mjordan
Date: Wed Mar 14 12:32:02 2012
New Revision: 359356
URL: http://svnview.digium.com/svn/asterisk?view=rev&rev=359356
Log:
Fix incorrect jitter buffer overflow due to missed resynchronizations
When a chane in time occurs, such that the timestamps associated with frames
being placed into an adaptive jitter buffer (implemented in jitterbuf.c)
are significantly different then the previously inserted frames, the jitter
buffer checks to see if it needs to be resynched to the new time frame. If
three consecutive packets break the threshold, the jitter buffer resynchs
itself to the new timestamps. This currently only occurs when history is
calculated, and hence only on JB_TYPE_VOICE frames.
JB_TYPE_CONTROL frames, on the other hand, are never passed to the history
calculations. Because of this, if the jump in time is greater then the
maximum allowed length of the jitter buffer, the JB_TYPE_CONTROL frames are
dropped and no resynchronization occurs. Alterntively, if the overfill
logic is not triggered, the JB_TYPE_CONTROL frame will be placed into the
buffer, but with a time reference that is not applicable. Subsequent
JB_TYPE_VOICE frames will quickly trigger the overflow logic until reads
from the jitter buffer reach the errant JB_TYPE_CONTROL frame.
This patch allows JB_TYPE_CONTROL frames to resynch the jitter buffer. As
JB_TYPE_CONTROL frames are unlikely to occur in multiples, it perform the
resynchronization on any JB_TYPE_CONTROL frame that breaks the resynch
threshold.
Note that this only impacts chan_iax2, as other consumers of the adaptive
jitter buffer use the abstract jitter buffer API, which does not use
JB_TYPE_CONTROL frames.
Review: https://reviewboard.asterisk.org/r/1814/
(closes issue ASTERISK-18964)
Reported by: Kris Shaw
Tested by: Kris Shaw, Matt Jordan
Patches:
jitterbuffer-2012-2-26.diff uploaded by Kris Shaw (license 5722)
Modified:
branches/1.8/main/jitterbuf.c
Modified: branches/1.8/main/jitterbuf.c
URL: http://svnview.digium.com/svn/asterisk/branches/1.8/main/jitterbuf.c?view=diff&rev=359356&r1=359355&r2=359356
==============================================================================
--- branches/1.8/main/jitterbuf.c (original)
+++ branches/1.8/main/jitterbuf.c Wed Mar 14 12:32:02 2012
@@ -109,50 +109,60 @@
ast_free(jb);
}
-
-
-#if 0
-static int longcmp(const void *a, const void *b)
-{
- return *(long *)a - *(long *)b;
-}
-#endif
-
-/*! \brief simple history manipulation
- \note maybe later we can make the history buckets variable size, or something? */
-/* drop parameter determines whether we will drop outliers to minimize
- * delay */
-static int history_put(jitterbuf *jb, long ts, long now, long ms)
-{
- long delay = now - (ts - jb->info.resync_offset);
+static int check_resync(jitterbuf *jb, long ts, long now, long ms, const enum jb_frame_type type, long *delay)
+{
+ long numts = 0;
long threshold = 2 * jb->info.jitter + jb->info.conf.resync_threshold;
- long kicked;
-
- /* don't add special/negative times to history */
- if (ts <= 0)
- return 0;
+
+ /* Check for overfill of the buffer */
+ if (jb->frames) {
+ numts = jb->frames->prev->ts - jb->frames->ts;
+ }
+
+ if (numts >= (jb->info.conf.max_jitterbuf)) {
+ if (!jb->dropem) {
+ ast_debug(1, "Attempting to exceed Jitterbuf max %ld timeslots\n",
+ jb->info.conf.max_jitterbuf);
+ jb->dropem = 1;
+ }
+ jb->info.frames_dropped++;
+ return -1;
+ } else {
+ jb->dropem = 0;
+ }
/* check for drastic change in delay */
if (jb->info.conf.resync_threshold != -1) {
- if (abs(delay - jb->info.last_delay) > threshold) {
+ if (abs(*delay - jb->info.last_delay) > threshold) {
jb->info.cnt_delay_discont++;
- if (jb->info.cnt_delay_discont > 3) {
- /* resync the jitterbuffer */
+ /* resync the jitterbuffer on 3 consecutive discontinuities,
+ * or immediately if a control frame */
+ if ((jb->info.cnt_delay_discont > 3) || (type == JB_TYPE_CONTROL)) {
jb->info.cnt_delay_discont = 0;
jb->hist_ptr = 0;
jb->hist_maxbuf_valid = 0;
-
- jb_warn("Resyncing the jb. last_delay %ld, this delay %ld, threshold %ld, new offset %ld\n", jb->info.last_delay, delay, threshold, ts - now);
+ jb_warn("Resyncing the jb. last_delay %ld, this delay %ld, threshold %ld, new offset %ld\n", jb->info.last_delay, *delay, threshold, ts - now);
jb->info.resync_offset = ts - now;
- jb->info.last_delay = delay = 0; /* after resync, frame is right on time */
+ jb->info.last_delay = *delay = 0; /* after resync, frame is right on time */
} else {
+ jb->info.frames_dropped++;
return -1;
}
} else {
- jb->info.last_delay = delay;
+ jb->info.last_delay = *delay;
jb->info.cnt_delay_discont = 0;
}
}
+ return 0;
+}
+
+static int history_put(jitterbuf *jb, long ts, long now, long ms, long delay)
+{
+ long kicked;
+
+ /* don't add special/negative times to history */
+ if (ts <= 0)
+ return 0;
kicked = jb->history[jb->hist_ptr % JB_HISTORY_SZ];
@@ -506,33 +516,17 @@
enum jb_return_code jb_put(jitterbuf *jb, void *data, const enum jb_frame_type type, long ms, long ts, long now)
{
- long numts;
-
+ long delay = now - (ts - jb->info.resync_offset);
jb_dbg2("jb_put(%x,%x,%ld,%ld,%ld)\n", jb, data, ms, ts, now);
- numts = 0;
- if (jb->frames)
- numts = jb->frames->prev->ts - jb->frames->ts;
-
- if (numts >= jb->info.conf.max_jitterbuf) {
- if (!jb->dropem) {
- ast_debug(1, "Attempting to exceed Jitterbuf max %ld timeslots\n",
- jb->info.conf.max_jitterbuf);
- jb->dropem = 1;
- }
- jb->info.frames_dropped++;
+ if (check_resync(jb, ts, now, ms, type, &delay)) {
return JB_DROP;
- } else {
- jb->dropem = 0;
}
if (type == JB_TYPE_VOICE) {
/* presently, I'm only adding VOICE frames to history and drift calculations; mostly because with the
* IAX integrations, I'm sending retransmitted control frames with their awkward timestamps through */
- if (history_put(jb,ts,now,ms)) {
- jb->info.frames_dropped++;
- return JB_DROP;
- }
+ history_put(jb, ts, now, ms, delay);
}
jb->info.frames_in++;
@@ -551,7 +545,6 @@
long diff;
static int dbg_cnt = 0;
- /*if ((now - jb_next(jb)) > 2 * jb->info.last_voice_ms) jb_warn("SCHED: %ld", (now - jb_next(jb))); */
/* get jitter info */
history_get(jb);
@@ -632,8 +625,6 @@
jb->info.frames_late++;
jb->info.frames_lost--;
jb_dbg("l");
- /*jb_warn("\nlate: wanted=%ld, this=%ld, next=%ld\n", jb->info.next_voice_ts - jb->info.current, frame->ts, queue_next(jb));
- jb_warninfo(jb); */
return JB_DROP;
}
}
@@ -748,8 +739,6 @@
jb->info.frames_late++;
jb->info.frames_lost--;
jb_dbg("l");
- /*jb_warn("\nlate: wanted=%ld, this=%ld, next=%ld\n", jb->info.next_voice_ts - jb->info.current, frame->ts, queue_next(jb));
- jb_warninfo(jb); */
return JB_DROP;
} else {
/* voice frame */
More information about the asterisk-commits
mailing list