[asterisk-commits] tilghman: branch 1.4 r239307 - /branches/1.4/contrib/scripts/safe_asterisk
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Mon Jan 11 21:18:41 CST 2010
Author: tilghman
Date: Mon Jan 11 21:18:36 2010
New Revision: 239307
URL: http://svnview.digium.com/svn/asterisk?view=rev&rev=239307
Log:
Portability and other fixes for the safe_asterisk script
(closes issue #16416)
Reported by: bklang
Patches:
safe_asterisk-compat-1.patch uploaded by bklang (license 919)
20100106__issue16416__trunk.diff.txt uploaded by tilghman (license 14)
Tested by: bklang
Modified:
branches/1.4/contrib/scripts/safe_asterisk
Modified: branches/1.4/contrib/scripts/safe_asterisk
URL: http://svnview.digium.com/svn/asterisk/branches/1.4/contrib/scripts/safe_asterisk?view=diff&rev=239307&r1=239306&r2=239307
==============================================================================
--- branches/1.4/contrib/scripts/safe_asterisk (original)
+++ branches/1.4/contrib/scripts/safe_asterisk Mon Jan 11 21:18:36 2010
@@ -29,7 +29,7 @@
# Check if Asterisk is already running. If it is, then bug out, because
# starting safe_asterisk when Asterisk is running is very bad.
VERSION=`${ASTSBINDIR}/asterisk -rx 'core show version'`
-if [ "`echo $VERSION | cut -c 1-8`" = "Asterisk" ]; then
+if test "`echo $VERSION | cut -c 1-8`" = "Asterisk" ; then
echo "Asterisk is already running. $0 will exit now."
exit 1
fi
@@ -38,35 +38,28 @@
# root. if running asterisk as other users, pass that to asterisk on the command
# line.
# if we're not root, fall back to standard everything.
-if [ `id -u` != 0 ]
-then
+if test `id -u` != 0 ; then
echo "Oops. I'm not root. Falling back to standard prio and file max." >&2
echo "This is NOT suitable for large systems." >&2
PRIORITY=0
else
- if `uname -s | grep Linux 2>&1 > /dev/null `
- then
+ if `uname -s | grep Linux >/dev/null 2>&1`; then
# maximum number of open files is set to the system maximum divided by two if
# MAXFILES is not set.
- if [ "$MAXFILES" = "" ]
- then
+ if test "x$MAXFILES" = "x" ; then
# just check if file-max is readable
- if [ -r /proc/sys/fs/file-max ]
- then
+ if test -r /proc/sys/fs/file-max ; then
MAXFILES=$(( `cat /proc/sys/fs/file-max` / 2 ))
fi
fi
SYSCTL_MAXFILES="fs.file-max"
- elif `uname -s | grep Darwin 2>&1 > /dev/null `
- then
+ elif `uname -s | grep Darwin /dev/null 2>&1`; then
SYSCTL_MAXFILES="kern.maxfiles"
fi
- if [ "$SYSMAXFILES" != "" ]
- then
- if [ "$SYSCTL_MAXFILES" != "" ]
- then
+ if test "x$SYSMAXFILES" != "x"; then
+ if test "x$SYSCTL_MAXFILES" != "x"; then
sysctl -w $SYSCTL_MAXFILES=$SYSMAXFILES
fi
fi
@@ -85,21 +78,21 @@
# Don't fork when running "safely"
#
ASTARGS=""
-if [ "$TTY" != "" ]; then
- if [ -c /dev/tty${TTY} ]; then
+if test "x$TTY" != "x" ; then
+ if test -c /dev/tty${TTY} ; then
TTY=tty${TTY}
- elif [ -c /dev/vc/${TTY} ]; then
+ elif test -c /dev/vc/${TTY} ; then
TTY=vc/${TTY}
else
echo "Cannot find your TTY (${TTY})" >&2
exit 1
fi
ASTARGS="${ASTARGS} -vvvg"
- if [ "$CONSOLE" != "no" ]; then
+ if test "x$CONSOLE" != "xno" ; then
ASTARGS="${ASTARGS} -c"
fi
fi
-if [ ! -w ${DUMPDROP} ]; then
+if test ! -w "${DUMPDROP}" ; then
echo "Cannot write to ${DUMPDROP}" >&2
exit 1
fi
@@ -113,9 +106,9 @@
# Run scripts to set any environment variables or do any other system-specific setup needed
#
-if [ -d /etc/asterisk/startup.d ]; then
+if test -d /etc/asterisk/startup.d ; then
for script in /etc/asterisk/startup.d/*.sh; do
- if [ -x ${script} ]; then
+ if test -r ${script} ; then
. ${script}
fi
done
@@ -125,7 +118,7 @@
{
while :; do
- if [ "$TTY" != "" ]; then
+ if test "x$TTY" != "x" ; then
cd /tmp
stty sane < /dev/${TTY}
nice -n $PRIORITY ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} >& /dev/${TTY} < /dev/${TTY}
@@ -135,41 +128,42 @@
fi
EXITSTATUS=$?
echo "Asterisk ended with exit status $EXITSTATUS"
- if [ "$EXITSTATUS" = "0" ]; then
+ if test "x$EXITSTATUS" = "x0" ; then
# Properly shutdown....
echo "Asterisk shutdown normally."
exit 0
- elif [ $EXITSTATUS -gt 128 ]; then
- EXITSIGNAL=EXITSTATUS-128
+ elif test "0$EXITSTATUS" -gt "128" ; then
+ EXITSIGNAL=$(($EXITSTATUS - 128))
echo "Asterisk exited on signal $EXITSIGNAL."
- if [ "$NOTIFY" != "" ]; then
+ if test "x$NOTIFY" != "x" ; then
echo "Asterisk on $MACHINE exited on signal $EXITSIGNAL. Might want to take a peek." | \
mail -s "Asterisk Died" $NOTIFY
fi
- if [ "$EXEC" != "" ]; then
+ if test "x$EXEC" != "x" ; then
$EXEC
fi
PID=`cat ${ASTPIDFILE}`
- if [ -f /tmp/core.${PID} ]; then
- mv /tmp/core.${PID} ${DUMPDROP}/core.`hostname`-`date -Iseconds` &
- elif [ -f /tmp/core ]; then
- mv /tmp/core ${DUMPDROP}/core.`hostname`-`date -Iseconds` &
+ DATE=`date "+%Y-%m-%dT%H:%M:%S%z"`
+ if test -f /tmp/core.${PID} ; then
+ mv /tmp/core.${PID} ${DUMPDROP}/core.`hostname`-$DATE &
+ elif test -f /tmp/core ; then
+ mv /tmp/core ${DUMPDROP}/core.`hostname`-$DATE &
fi
else
echo "Asterisk died with code $EXITSTATUS."
PID=`cat ${ASTPIDFILE}`
- if [ -f /tmp/core.${PID} ]; then
- mv /tmp/core.${PID} ${DUMPDROP}/core.`hostname`-`date -Iseconds` &
- elif [ -f /tmp/core ]; then
- mv /tmp/core ${DUMPDROP}/core.`hostname`-`date -Iseconds` &
+ DATE=`date "+%Y-%m-%dT%H:%M:%S%z"`
+ if test -f /tmp/core.${PID} ; then
+ mv /tmp/core.${PID} ${DUMPDROP}/core.`hostname`-$DATE &
+ elif test -f /tmp/core ; then
+ mv /tmp/core ${DUMPDROP}/core.`hostname`-$DATE &
fi
fi
echo "Automatically restarting Asterisk."
sleep $SLEEPSECS
- if [ $KILLALLMPG123 ]
- then
+ if test "0$KILLALLMPG123" -gt "0" ; then
killall -9 mpg123
fi
done
More information about the asterisk-commits
mailing list