[asterisk-commits] mnicholson: branch group/newcdr r197541 - in /team/group/newcdr: ./ channels/...
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Thu May 28 09:54:58 CDT 2009
Author: mnicholson
Date: Thu May 28 09:54:53 2009
New Revision: 197541
URL: http://svn.asterisk.org/svn-view/asterisk?view=rev&rev=197541
Log:
Merged revisions 197260,197265-197266,197335,197338,197374,197406,197409,197431,197467,197528,197535,197538 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
................
r197260 | seanbright | 2009-05-27 15:08:16 -0500 (Wed, 27 May 2009) | 6 lines
Since we use bashisms in build_tools/mkpkgconfig, we should call on bash
explicitly when running from the Makefile.
(closes issue #15209)
Reported by: seandarcy
................
r197265 | seanbright | 2009-05-27 15:13:12 -0500 (Wed, 27 May 2009) | 12 lines
Blocked revisions 197264 via svnmerge
........
r197264 | seanbright | 2009-05-27 16:12:06 -0400 (Wed, 27 May 2009) | 6 lines
Since we use bashisms in build_tools/mkpkgconfig, we should call on bash
explicitly when running from the Makefile.
(closes issue #15209)
Reported by: seandarcy
........
................
r197266 | oej | 2009-05-27 15:14:00 -0500 (Wed, 27 May 2009) | 8 lines
Adding some generic handling of error codes sent to us in replys to requests.
Previously they always set hangupcause 0, which is generally wrong. With this
change, we're setting some generic hangup causes. For 5xx errors, which indicate
some sort of problem with the remote server, we're now setting CONGESTION.
EDVX002
................
r197335 | kpfleming | 2009-05-27 17:21:53 -0500 (Wed, 27 May 2009) | 3 lines
Ensure that this header includes xmldoc.h, since it depends on it.
................
r197338 | russell | 2009-05-27 17:42:15 -0500 (Wed, 27 May 2009) | 2 lines
Don't do a pointer comparison before setting the remote address.
................
r197374 | tilghman | 2009-05-27 18:48:15 -0500 (Wed, 27 May 2009) | 2 lines
Revert commit 192032. This define is needed on Mac OS X.
................
r197406 | ghenry | 2009-05-28 05:43:51 -0500 (Thu, 28 May 2009) | 1 line
closes issue #15156
................
r197409 | ghenry | 2009-05-28 06:18:09 -0500 (Thu, 28 May 2009) | 14 lines
New objectclass AsteriskVoiceMail and AstAccountCallLimit attribute
Added new ObjectClass AsteriskVoiceMail, and AstAccountCallLimit attribute
and cleaned up formatting and tested with OpenLDAP
(closes issue #15155)
Reported by: scramatte
Patches:
asterisk.schema uploaded by scramatte (license 796)
Tested by: suretec
Review: [full review board URL with trailing slash]
................
r197431 | ghenry | 2009-05-28 06:25:03 -0500 (Thu, 28 May 2009) | 9 lines
Added AstVoicemailContext
Added AstVoicemailContext
(closes issue #15155)
Reported by: scramatte
Tested by: suretec
................
r197467 | file | 2009-05-28 08:47:45 -0500 (Thu, 28 May 2009) | 15 lines
Merged revisions 197466 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197466 | file | 2009-05-28 10:44:58 -0300 (Thu, 28 May 2009) | 8 lines
Fix a bug where the flag indicating the presence of rport would get overwritten by the nat setting.
The presence of rport is now stored as a separate flag. Once the dialog is setup and authenticated
(or it passes through unauthenticated) the proper nat flag is set.
(closes issue #13823)
Reported by: dimas
........
................
r197528 | seanbright | 2009-05-28 09:32:03 -0500 (Thu, 28 May 2009) | 2 lines
Remove a bunch of trailing whitespace in preparation for reformatting/cleanup.
................
r197535 | seanbright | 2009-05-28 09:39:21 -0500 (Thu, 28 May 2009) | 3 lines
Let's try that again, this time removing trailing whitespace and not leading
whitespace. I can't believe no one noticed.
................
r197538 | file | 2009-05-28 09:51:43 -0500 (Thu, 28 May 2009) | 5 lines
Fix a bug in stringfields where it did not actually free the pools of memory.
(closes issue #15074)
Reported by: pj
................
Modified:
team/group/newcdr/ (props changed)
team/group/newcdr/Makefile
team/group/newcdr/channels/chan_sip.c
team/group/newcdr/configs/agents.conf.sample
team/group/newcdr/configs/ais.conf.sample
team/group/newcdr/configs/alarmreceiver.conf.sample
team/group/newcdr/configs/asterisk.adsi
team/group/newcdr/configs/cdr.conf.sample
team/group/newcdr/configs/chan_dahdi.conf.sample
team/group/newcdr/configs/cli_aliases.conf.sample
team/group/newcdr/configs/console.conf.sample
team/group/newcdr/configs/dundi.conf.sample
team/group/newcdr/configs/extconfig.conf.sample
team/group/newcdr/configs/extensions.ael.sample
team/group/newcdr/configs/extensions.conf.sample
team/group/newcdr/configs/extensions.lua.sample
team/group/newcdr/configs/extensions_minivm.conf.sample
team/group/newcdr/configs/features.conf.sample
team/group/newcdr/configs/festival.conf.sample
team/group/newcdr/configs/followme.conf.sample
team/group/newcdr/configs/gtalk.conf.sample
team/group/newcdr/configs/h323.conf.sample
team/group/newcdr/configs/http.conf.sample
team/group/newcdr/configs/iax.conf.sample
team/group/newcdr/configs/iaxprov.conf.sample
team/group/newcdr/configs/indications.conf.sample
team/group/newcdr/configs/jingle.conf.sample
team/group/newcdr/configs/logger.conf.sample
team/group/newcdr/configs/manager.conf.sample
team/group/newcdr/configs/meetme.conf.sample
team/group/newcdr/configs/mgcp.conf.sample
team/group/newcdr/configs/minivm.conf.sample
team/group/newcdr/configs/modules.conf.sample
team/group/newcdr/configs/musiconhold.conf.sample
team/group/newcdr/configs/osp.conf.sample
team/group/newcdr/configs/oss.conf.sample
team/group/newcdr/configs/phone.conf.sample
team/group/newcdr/configs/phoneprov.conf.sample
team/group/newcdr/configs/queuerules.conf.sample
team/group/newcdr/configs/queues.conf.sample
team/group/newcdr/configs/res_ldap.conf.sample
team/group/newcdr/configs/res_odbc.conf.sample
team/group/newcdr/configs/res_snmp.conf.sample
team/group/newcdr/configs/rpt.conf.sample
team/group/newcdr/configs/rtp.conf.sample
team/group/newcdr/configs/say.conf.sample
team/group/newcdr/configs/sip.conf.sample
team/group/newcdr/configs/skinny.conf.sample
team/group/newcdr/configs/sla.conf.sample
team/group/newcdr/configs/unistim.conf.sample
team/group/newcdr/configs/users.conf.sample
team/group/newcdr/configs/voicemail.conf.sample
team/group/newcdr/contrib/scripts/asterisk.ldap-schema
team/group/newcdr/contrib/scripts/asterisk.ldif
team/group/newcdr/doc/ldap.txt
team/group/newcdr/include/asterisk/agi.h
team/group/newcdr/main/rtp_engine.c
team/group/newcdr/main/utils.c
team/group/newcdr/main/xml.c
Propchange: team/group/newcdr/
------------------------------------------------------------------------------
automerge = on
Propchange: team/group/newcdr/
------------------------------------------------------------------------------
Binary property 'branch-1.4-blocked' - no diff available.
Propchange: team/group/newcdr/
------------------------------------------------------------------------------
Binary property 'branch-1.4-merged' - no diff available.
Propchange: team/group/newcdr/
------------------------------------------------------------------------------
--- svnmerge-integrated (original)
+++ svnmerge-integrated Thu May 28 09:54:53 2009
@@ -1,1 +1,1 @@
-/trunk:1-197256
+/trunk:1-197539
Modified: team/group/newcdr/Makefile
URL: http://svn.asterisk.org/svn-view/asterisk/team/group/newcdr/Makefile?view=diff&rev=197541&r1=197540&r2=197541
==============================================================================
--- team/group/newcdr/Makefile (original)
+++ team/group/newcdr/Makefile Thu May 28 09:54:53 2009
@@ -472,7 +472,7 @@
rm -f build_tools/menuselect-deps
datafiles: _all
- if [ x`$(ID) -un` = xroot ]; then CFLAGS="$(ASTCFLAGS)" sh build_tools/mkpkgconfig $(DESTDIR)/usr/lib/pkgconfig; fi
+ if [ x`$(ID) -un` = xroot ]; then CFLAGS="$(ASTCFLAGS)" bash build_tools/mkpkgconfig $(DESTDIR)/usr/lib/pkgconfig; fi
# Should static HTTP be installed during make samples or even with its own target ala
# webvoicemail? There are portions here that *could* be customized but might also be
# improved a lot. I'll put it here for now.
Modified: team/group/newcdr/channels/chan_sip.c
URL: http://svn.asterisk.org/svn-view/asterisk/team/group/newcdr/channels/chan_sip.c?view=diff&rev=197541&r1=197540&r2=197541
==============================================================================
--- team/group/newcdr/channels/chan_sip.c (original)
+++ team/group/newcdr/channels/chan_sip.c Thu May 28 09:54:53 2009
@@ -1502,7 +1502,7 @@
#define SIP_PAGE2_CONNECTLINEUPDATE_PEND (1 << 10)
#define SIP_PAGE2_RPID_IMMEDIATE (1 << 11)
-
+#define SIP_PAGE2_RPORT_PRESENT (1 << 12) /*!< Was rport received in the Via header? */
#define SIP_PAGE2_PREFERRED_CODEC (1 << 13) /*!< GDP: Only respond with single most preferred joint codec */
#define SIP_PAGE2_VIDEOSUPPORT (1 << 14) /*!< DP: Video supported if offered? */
#define SIP_PAGE2_TEXTSUPPORT (1 << 15) /*!< GDP: Global text enable */
@@ -5699,6 +5699,16 @@
case 606: /* Not acceptable */
return AST_CAUSE_BEARERCAPABILITY_NOTAVAIL;
default:
+ if (cause < 500 && cause >= 400) {
+ /* 4xx class error that is unknown - someting wrong with our request */
+ return AST_CAUSE_INTERWORKING;
+ } else if (cause < 600 && cause >= 500) {
+ /* 5xx class error - problem in the remote end */
+ return AST_CAUSE_CONGESTION;
+ } else if (cause < 700 && cause >= 600) {
+ /* 6xx - global errors in the 4xx class */
+ return AST_CAUSE_INTERWORKING;
+ }
return AST_CAUSE_NORMAL;
}
/* Never reached */
@@ -13572,7 +13582,7 @@
/* Check for rport */
c = strstr(via, ";rport");
if (c && (c[6] != '=')) /* rport query, not answer */
- ast_set_flag(&p->flags[0], SIP_NAT_ROUTE);
+ ast_set_flag(&p->flags[1], SIP_PAGE2_RPORT_PRESENT);
c = strchr(via, ';');
if (c)
@@ -13943,6 +13953,11 @@
res = AUTH_FAKE_AUTH; /* reject with fake authorization request */
else
res = AUTH_SECRET_FAILED; /* we don't want any guests, authentication will fail */
+
+
+ if (ast_test_flag(&p->flags[1], SIP_PAGE2_RPORT_PRESENT)) {
+ ast_set_flag(&p->flags[0], SIP_NAT_ROUTE);
+ }
return res;
}
Modified: team/group/newcdr/configs/agents.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/team/group/newcdr/configs/agents.conf.sample?view=diff&rev=197541&r1=197540&r2=197541
==============================================================================
--- team/group/newcdr/configs/agents.conf.sample (original)
+++ team/group/newcdr/configs/agents.conf.sample Thu May 28 09:54:53 2009
@@ -32,14 +32,14 @@
; Define autologoffunavail to have agents automatically logged
; out when the extension that they are at returns a CHANUNAVAIL
; status when a call is attempted to be sent there.
-; Default is "no".
+; Default is "no".
;
;autologoffunavail=yes
;
; Define ackcall to require a DTMF acknowledgement when
; an agent logs in using agentcallbacklogin. Default is "no".
; Can also be set to "always", which will also require AgentLogin
-; agents to acknowledge calls. Use the acceptdtmf option to
+; agents to acknowledge calls. Use the acceptdtmf option to
; configure what DTMF key press should be used to acknowledge the
; call. The default is '#'.
;
@@ -70,14 +70,14 @@
;
;goodbye => goodbye_file
;
-; Define updatecdr. This is whether or not to change the source
-; channel in the CDR record for this call to agent/agent_id so
+; Define updatecdr. This is whether or not to change the source
+; channel in the CDR record for this call to agent/agent_id so
; that we know which agent generates the call
;
;updatecdr=no
;
; Group memberships for agents (may change in mid-file)
-;
+;
;group=3
;group=1,2
;group=
@@ -85,7 +85,7 @@
; --------------------------------------------------
; This section is devoted to recording agent's calls
; The keywords are global to the chan_agent channel driver
-;
+;
; Enable recording calls addressed to agents. It's turned off by default.
;recordagentcalls=yes
;
@@ -100,7 +100,7 @@
; /var/spool/asterisk/monitor
;savecallsin=/var/calls
;
-; An optional custom beep sound file to play to always-connected agents.
+; An optional custom beep sound file to play to always-connected agents.
;custom_beep=beep
;
; --------------------------------------------------
Modified: team/group/newcdr/configs/ais.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/team/group/newcdr/configs/ais.conf.sample?view=diff&rev=197541&r1=197540&r2=197541
==============================================================================
--- team/group/newcdr/configs/ais.conf.sample (original)
+++ team/group/newcdr/configs/ais.conf.sample Thu May 28 09:54:53 2009
@@ -1,5 +1,5 @@
;
-; Sample configuration file for res_ais
+; Sample configuration file for res_ais
; * SAForum AIS (Application Interface Specification)
;
; More information on the AIS specification is available from the SAForum.
@@ -76,7 +76,7 @@
;
; This example would be used for a node that has phones directly registered
; to it, but does not have direct access to voicemail. So, this node wants
-; to be informed about MWI state changes on other voicemail server nodes, but
+; to be informed about MWI state changes on other voicemail server nodes, but
; is not capable of publishing any state changes.
;
; [mwi]
Modified: team/group/newcdr/configs/alarmreceiver.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/team/group/newcdr/configs/alarmreceiver.conf.sample?view=diff&rev=197541&r1=197540&r2=197541
==============================================================================
--- team/group/newcdr/configs/alarmreceiver.conf.sample (original)
+++ team/group/newcdr/configs/alarmreceiver.conf.sample Thu May 28 09:54:53 2009
@@ -7,10 +7,10 @@
[general]
-;
+;
; Specify a timestamp format for the metadata section of the event files
; Default is %a %b %d, %Y @ %H:%M:%S %Z
-
+
timestampformat = %a %b %d, %Y @ %H:%M:%S %Z
;
@@ -32,7 +32,7 @@
eventspooldir = /tmp
-;
+;
; The alarmreceiver app can either log the events one-at-a-time to individual
; files in the spool directory, or it can store them until the caller
; disconnects and write them all to one file.
@@ -46,7 +46,7 @@
; The timeout for receiving the first DTMF digit is adjustable from 1000 msec.
; to 10000 msec. The default is 2000 msec. Note: if you wish to test the
; receiver by entering digits manually, set this to a reasonable time out
-; like 10000 milliseconds.
+; like 10000 milliseconds.
fdtimeout = 2000
@@ -54,7 +54,7 @@
; The timeout for receiving subsequent DTMF digits is adjustable from
; 110 msec. to 4000 msec. The default is 200 msec. Note: if you wish to test
; the receiver by entering digits manually, set this to a reasonable time out
-; like 4000 milliseconds.
+; like 4000 milliseconds.
;
sdtimeout = 200
Modified: team/group/newcdr/configs/asterisk.adsi
URL: http://svn.asterisk.org/svn-view/asterisk/team/group/newcdr/configs/asterisk.adsi?view=diff&rev=197541&r1=197540&r2=197541
==============================================================================
--- team/group/newcdr/configs/asterisk.adsi (original)
+++ team/group/newcdr/configs/asterisk.adsi Thu May 28 09:54:53 2009
@@ -86,10 +86,10 @@
IFEVENT OFFHOOK THEN
CLEAR
CLEARFLAG "nocallwaiting"
- CLEARDISPLAY
+ CLEARDISPLAY
SHOWDISPLAY "titles" AT 1
- SHOWKEYS "vmail"
- SHOWKEYS "cidblock"
+ SHOWKEYS "vmail"
+ SHOWKEYS "cidblock"
SHOWKEYS "cwdisable" UNLESS "nocallwaiting"
GOTO "offHook"
ENDIF
@@ -117,9 +117,9 @@
SHOWKEYS "vmail_OH"
ENDIF
IFEVENT TIMER THEN
- CLEAR
+ CLEAR
SHOWDISPLAY "empty" AT 4
- ENDIF
+ ENDIF
ENDSUB
SUB "offHook" IS
Modified: team/group/newcdr/configs/cdr.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/team/group/newcdr/configs/cdr.conf.sample?view=diff&rev=197541&r1=197540&r2=197541
==============================================================================
--- team/group/newcdr/configs/cdr.conf.sample (original)
+++ team/group/newcdr/configs/cdr.conf.sample Thu May 28 09:54:53 2009
@@ -14,12 +14,12 @@
;enable=yes
; Define whether or not to log unanswered calls. Setting this to "yes" will
-; report every attempt to ring a phone in dialing attempts, when it was not
+; report every attempt to ring a phone in dialing attempts, when it was not
; answered. For example, if you try to dial 3 extensions, and this option is "yes",
; you will get 3 CDR's, one for each phone that was rung. Default is "no". Some
; find this information horribly useless. Others find it very valuable. Note, in "yes"
; mode, you will see one CDR, with one of the call targets on one side, and the originating
-; channel on the other, and then one CDR for each channel attempted. This may seem
+; channel on the other, and then one CDR for each channel attempted. This may seem
; redundant, but cannot be helped.
;unanswered = no
@@ -67,7 +67,7 @@
; Normally, the 'billsec' field logged to the backends (text files or databases)
; is simply the end time (hangup time) minus the answer time in seconds. Internally,
-; asterisk stores the time in terms of microseconds and seconds. By setting
+; asterisk stores the time in terms of microseconds and seconds. By setting
; initiatedseconds to 'yes', you can force asterisk to report any seconds
; that were initiated (a sort of round up method). Technically, this is
; when the microsecond part of the end time is greater than the microsecond
@@ -78,19 +78,19 @@
;
; CHOOSING A CDR "BACKEND" (what kind of output to generate)
;
-; To choose a backend, you have to make sure either the right category is
-; defined in this file, or that the appropriate config file exists, and has the
+; To choose a backend, you have to make sure either the right category is
+; defined in this file, or that the appropriate config file exists, and has the
; proper definitions in it. If there are any problems, usually, the entry will
; silently ignored, and you get no output.
-;
-; Also, please note that you can generate CDR records in as many formats as you
+;
+; Also, please note that you can generate CDR records in as many formats as you
; wish. If you configure 5 different CDR formats, then each event will be logged
; in 5 different places! In the example config files, all formats are commented
; out except for the cdr-csv format.
;
; Here are all the possible back ends:
;
-; csv, custom, manager, odbc, pgsql, radius, sqlite, tds
+; csv, custom, manager, odbc, pgsql, radius, sqlite, tds
; (also, mysql is available via the asterisk-addons, due to licensing
; requirements)
; (please note, also, that other backends can be created, by creating
@@ -104,7 +104,7 @@
; backend is marked with XXX, you know that the "configure" command could not find
; the required libraries for that option.
;
-; To get CDRs to be logged to the plain-jane /var/log/asterisk/cdr-csv/Master.csv
+; To get CDRs to be logged to the plain-jane /var/log/asterisk/cdr-csv/Master.csv
; file, define the [csv] category in this file. No database necessary. The example
; config files are set up to provide this kind of output by default.
;
@@ -126,7 +126,7 @@
; shows that the modules are available, and the cdr_pgsql.conf file exists, and
; has a [global] section with the proper variables defined.
;
-; For logging to radius databases, make sure all the proper libs are installed, that
+; For logging to radius databases, make sure all the proper libs are installed, that
; "make menuselect" shows that the modules are available, and the [radius]
; category is defined in this file, and in that section, make sure the 'radiuscfg'
; variable is properly pointing to an existing radiusclient.conf file.
@@ -135,7 +135,7 @@
; which is usually /var/log/asterisk. Of course, the proper libraries should be available
; during the 'configure' operation.
;
-; For tds logging, make sure the proper libraries are available during the 'configure'
+; For tds logging, make sure the proper libraries are available during the 'configure'
; phase, and that cdr_tds.conf exists and is properly set up with a [global] category.
;
; Also, remember, that if you wish to log CDR info to a database, you will have to define
Modified: team/group/newcdr/configs/chan_dahdi.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/team/group/newcdr/configs/chan_dahdi.conf.sample?view=diff&rev=197541&r1=197540&r2=197541
==============================================================================
--- team/group/newcdr/configs/chan_dahdi.conf.sample (original)
+++ team/group/newcdr/configs/chan_dahdi.conf.sample Thu May 28 09:54:53 2009
@@ -6,7 +6,7 @@
; will reload the configuration file, but not all configuration options
; are re-configured during a reload (signalling, as well as PRI and
; SS7-related settings cannot be changed on a reload).
-;
+;
; This file documents many configuration variables. Normally unless you know
; what a variable means or that it should be changed, there's no reason to
; un-comment those lines.
@@ -21,11 +21,11 @@
;
; Trunk groups are used for NFAS or GR-303 connections.
;
-; Group: Defines a trunk group.
+; Group: Defines a trunk group.
; trunkgroup => <trunkgroup>,<dchannel>[,<backup1>...]
;
; trunkgroup is the numerical trunk group to create
-; dchannel is the DAHDI channel which will have the
+; dchannel is the DAHDI channel which will have the
; d-channel for the trunk.
; backup1 is an optional list of backup d-channels.
;
@@ -85,7 +85,7 @@
; example, if you set 'national', you will be unable to dial local or
; international numbers.
;
-; PRI Local Dialplan: Only RARELY used for PRI (sets the calling number's
+; PRI Local Dialplan: Only RARELY used for PRI (sets the calling number's
; numbering plan). In North America, the typical use is sending the 10 digit
; callerID number and setting the prilocaldialplan to 'national' (the default).
; Only VERY rarely will you need to change this.
@@ -98,12 +98,12 @@
; national: National ISDN
; international: International ISDN
; dynamic: Dynamically selects the appropriate dialplan
-; redundant: Same as dynamic, except that the underlying number is not
+; redundant: Same as dynamic, except that the underlying number is not
; changed (not common)
;
;pridialplan=unknown
;prilocaldialplan=national
-;
+;
; pridialplan may be also set at dialtime, by prefixing the dialled number with
; one of the following letters:
; U - Unknown
@@ -133,27 +133,27 @@
;
; PRI caller ID prefixes based on the given TON/NPI (dialplan)
; This is especially needed for EuroISDN E1-PRIs
-;
+;
; None of the prefix settings can be changed on reload.
;
-; sample 1 for Germany
+; sample 1 for Germany
;internationalprefix = 00
;nationalprefix = 0
;localprefix = 0711
;privateprefix = 07115678
-;unknownprefix =
-;
-; sample 2 for Germany
+;unknownprefix =
+;
+; sample 2 for Germany
;internationalprefix = +
;nationalprefix = +49
;localprefix = +49711
;privateprefix = +497115678
-;unknownprefix =
+;unknownprefix =
;
; PRI resetinterval: sets the time in seconds between restart of unused
; B channels; defaults to 'never'.
;
-;resetinterval = 3600
+;resetinterval = 3600
;
; Overlap dialing mode (sending overlap digits)
; Cannot be changed on a reload.
@@ -168,7 +168,7 @@
; Enable this to report Busy and Congestion on a PRI using out-of-band
; notification. Inband indication, as used by Asterisk doesn't seem to work
; with all telcos.
-;
+;
; outofband: Signal Busy/Congestion out of band with RELEASE/DISCONNECT
; inband: Signal Busy/Congestion using in-band tones (default)
;
@@ -206,7 +206,7 @@
; T203: Layer 2 max time without frames being exchanged (default 10000 ms)
; T305: Wait for DISCONNECT acknowledge (default 30000 ms)
; T308: Wait for RELEASE acknowledge (default 4000 ms)
-; T309: Maintain active calls on Layer 2 disconnection (default -1,
+; T309: Maintain active calls on Layer 2 disconnection (default -1,
; Asterisk clears calls)
; EuroISDN: 6000 to 12000 ms, according to (N200 + 1) x T200 + 2s
; May vary in other ISDN standards (Q.931 1993 : 90000 ms)
@@ -284,11 +284,11 @@
; (see below). The 'signalling' format specified will be the inbound signalling
; format. If you only specify 'signalling', then it will be the format for
; both inbound and outbound.
-;
-; outsignalling can only be one of:
+;
+; outsignalling can only be one of:
; em, em_e1, em_w, sf, sf_w, sf_featd, sf_featdmf, sf_featb, featd,
; featdmf, featdmf_ta, e911, fgccama, fgccamamf
-;
+;
; outsignalling cannot be changed on a reload.
;
;signalling=featdmf
@@ -318,9 +318,9 @@
; None of them will update on a reload.
;
; How long generated tones (DTMF and MF) will be played on the channel
-; (in milliseconds).
-;
-; This is a global, rather than a per-channel setting. It will not be
+; (in milliseconds).
+;
+; This is a global, rather than a per-channel setting. It will not be
; updated on a reload.
;
;toneduration=100
@@ -354,7 +354,7 @@
; What signals the start of caller ID
; ring = a ring signals the start (default)
; polarity = polarity reversal signals the start
-; polarity_IN = polarity reversal signals the start, for India,
+; polarity_IN = polarity reversal signals the start, for India,
; for dtmf dialtone detection; using DTMF.
; (see doc/India-CID.txt)
;
@@ -381,7 +381,7 @@
; fsk,rpas - the FXO line is monitored for MWI FSK spills preceded
; by a ring pulse alert signal.
; neon - The fxo line is monitored for the presence of NEON pulses
-; indicating MWI.
+; indicating MWI.
; When detected, an internal Asterisk MWI event is generated so that any other
; part of Asterisk that cares about MWI state changes is notified, just as if
; the state change came from app_voicemail.
@@ -432,7 +432,7 @@
;
; Some countries (UK) have ring tones with different ring tones (ring-ring),
; which means the caller ID needs to be set later on, and not just after
-; the first ring, as per the default (1).
+; the first ring, as per the default (1).
;
;sendcalleridafter = 2
;
@@ -472,10 +472,10 @@
;
callreturn=yes
;
-; Stutter dialtone support: If a mailbox is specified without a voicemail
-; context, then when voicemail is received in a mailbox in the default
+; Stutter dialtone support: If a mailbox is specified without a voicemail
+; context, then when voicemail is received in a mailbox in the default
; voicemail context in voicemail.conf, taking the phone off hook will cause a
-; stutter dialtone instead of a normal one.
+; stutter dialtone instead of a normal one.
;
; If a mailbox is specified *with* a voicemail context, the same will result
; if voicemail received in mailbox in the specified voicemail context.
@@ -486,9 +486,9 @@
;
; for any other voicemail context, the following will produce the stutter tone:
;
-;mailbox=1234 at context
-;
-; Enable echo cancellation
+;mailbox=1234 at context
+;
+; Enable echo cancellation
; Use either "yes", "no", or a power of two from 32 to 256 if you wish to
; actually set the number of taps of cancellation.
;
@@ -552,7 +552,7 @@
;
; There are several independent gain settings:
; rxgain: gain for the rx (receive - into Asterisk) channel. Default: 0.0
-; txgain: gain for the tx (transmit - out of Asterisk Asterisk) channel.
+; txgain: gain for the tx (transmit - out of Asterisk Asterisk) channel.
; Default: 0.0
; cid_rxgain: set the gain just for the caller ID sounds Asterisk
; emits. Default: 5.0 .
@@ -600,10 +600,10 @@
;
; caller ID can be set to "asreceived" or a specific number if you want to
; override it. Note that "asreceived" only applies to trunk interfaces.
-; fullname sets just the
+; fullname sets just the
;
; fullname: sets just the name part.
-; cid_number: sets just the number part:
+; cid_number: sets just the number part:
;
;callerid = 123456
;
@@ -642,7 +642,7 @@
;smdiport=/dev/ttyS0
;
; On trunk interfaces (FXS) and E&M interfaces (E&M, Wink, Feature Group D
-; etc, it can be useful to perform busy detection either in an effort to
+; etc, it can be useful to perform busy detection either in an effort to
; detect hangup or for detecting busies. This enables listening for
; the beep-beep busy pattern.
;
@@ -685,8 +685,8 @@
;
;hanguponpolarityswitch=yes
;
-; polarityonanswerdelay: minimal time period (ms) between the answer
-; polarity switch and hangup polarity switch.
+; polarityonanswerdelay: minimal time period (ms) between the answer
+; polarity switch and hangup polarity switch.
; (default: 600ms)
;
; On trunk interfaces (FXS) it can be useful to attempt to follow the progress
@@ -699,7 +699,7 @@
; with "progzone".
;
; progzone also affects the pattern used for buzydetect (unless
-; busypattern is set explicitly). The possible values are:
+; busypattern is set explicitly). The possible values are:
; us (default)
; ca (alias for 'us')
; cr (Costa Rica)
@@ -741,7 +741,7 @@
;faxdetect=no
;
; When 'faxdetect' is used, one could use 'faxbuffers' to configure the DAHDI
-; transmit buffer policy. The default is *OFF*. When this configuration
+; transmit buffer policy. The default is *OFF*. When this configuration
; option is used, the faxbuffer policy will be used for the life of the call
; after a fax tone is detected. The faxbuffer policy is reverted after the
; call is torn down. The sample below will result in 6 buffers and a full
@@ -834,7 +834,7 @@
; parameters that were specified above its declaration.
;
; For GR-303, CRV's are created like channels except they must start with the
-; trunk group followed by a colon, e.g.:
+; trunk group followed by a colon, e.g.:
;
; crv => 1:1
; crv => 2:1-2,5-8
@@ -908,15 +908,15 @@
; A range of -1 will force it to always match.
; Anything lower than -1 would presumably cause it to never match.
;
-;dring1=95,0,0
-;dring1context=internal1
+;dring1=95,0,0
+;dring1context=internal1
;dring1range=10
-;dring2=325,95,0
-;dring2context=internal2
+;dring2=325,95,0
+;dring2context=internal2
;dring2range=10
; If no pattern is matched here is where we go.
;context=default
-;channel => 1
+;channel => 1
; ---------------- Options for use with signalling=ss7 -----------------
; None of them can be changed by a reload.
@@ -945,12 +945,12 @@
;
;ss7_calling_nai=dynamic
;
-;
-; sample 1 for Germany
+;
+; sample 1 for Germany
;ss7_internationalprefix = 00
;ss7_nationalprefix = 0
-;ss7_subscriberprefix =
-;ss7_unknownprefix =
+;ss7_subscriberprefix =
+;ss7_unknownprefix =
;
; This option is used to disable automatic sending of ACM when the call is started
@@ -1056,7 +1056,7 @@
; 'stack' is for very verbose output of the channel and context call stack, only useful
; if you are debugging a crash or want to learn how the library works. The stack logging
; will be only enabled if the openr2 library was compiled with -DOR2_TRACE_STACKS
-; You can mix up values, like: loglevel=error,debug,mf to log just error, debug and
+; You can mix up values, like: loglevel=error,debug,mf to log just error, debug and
; multi frequency messages
; 'all' is a special value to log all the activity
; 'nothing' is a clean-up value, in case you want to not log any activity for
@@ -1110,20 +1110,20 @@
; You most likely dont need this feature. Default is yes.
; When this is set to yes, all calls that are offered (incoming calls) which
-; DNIS is valid (exists in extensions.conf) and pass collect call validation
+; DNIS is valid (exists in extensions.conf) and pass collect call validation
; will be accepted with a Group B tone (either call with charge or not, depending on mfcr2_charge_calls)
; with this set to 'no' then the call will NOT be accepted on offered, and the call will start its
; execution in extensions.conf without being accepted until the channel is answered (either with Answer() or
-; any other application resulting in the channel being answered).
+; any other application resulting in the channel being answered).
; This can be set to 'no' if your telco or PBX needs the hangup cause to be set accurately
; when this option is set to no you must explicitly accept the call with DAHDIAcceptR2Call
-; or implicitly through the Answer() application.
+; or implicitly through the Answer() application.
; mfcr2_accept_on_offer=yes
; WARNING: advanced users only! I really mean it
; this parameter is commented by default because
; YOU DON'T NEED IT UNLESS YOU REALLY GROK MFC/R2
-; READ COMMENTS on doc/r2proto.conf in openr2 package
+; READ COMMENTS on doc/r2proto.conf in openr2 package
; for more info
; mfcr2_advanced_protocol_file=/path/to/r2proto.conf
@@ -1171,7 +1171,7 @@
; chan_dahdi.conf and [general] in users.conf - one section's configuration
; does not affect another one's.
;
-; Instead of letting common configuration values "slide through" you can
+; Instead of letting common configuration values "slide through" you can
; use configuration templates to easily keep the common part in one
; place and override where needed.
;
Modified: team/group/newcdr/configs/cli_aliases.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/team/group/newcdr/configs/cli_aliases.conf.sample?view=diff&rev=197541&r1=197540&r2=197541
==============================================================================
--- team/group/newcdr/configs/cli_aliases.conf.sample (original)
+++ team/group/newcdr/configs/cli_aliases.conf.sample Thu May 28 09:54:53 2009
@@ -13,7 +13,7 @@
;template = asterisk12 ; Asterisk 1.2 style syntax
;template = asterisk14 ; Asterisk 1.4 style syntax
;template = individual_custom ; see [individual_custom] example below which
- ; includes a list of aliases from an external
+ ; includes a list of aliases from an external
; file
@@ -70,7 +70,7 @@
; by Asterisk. If you wish to use the provided templates, simply define the
; context name which does not utilize the '_tpl' at the end. For example,
; if you would like to use the Asterisk 1.2 style syntax, define in the
-; [general] section
+; [general] section
[asterisk12_tpl](!)
show channeltypes=core show channeltypes
@@ -92,7 +92,7 @@
show applications=core show applications
show functions=core show functions
show switches=core show switches
-show hints=core show hints
+show hints=core show hints
show globals=core show globals
show function=core show function
show application=core show application
@@ -102,7 +102,7 @@
show audio codecs=core show audio codecs
show video codecs=core show video codecs
show image codecs=core show image codecs
-show codec=core show codec
+show codec=core show codec
moh classes show=moh show classes
moh files show=moh show files
agi no debug=agi debug off
Modified: team/group/newcdr/configs/console.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/team/group/newcdr/configs/console.conf.sample?view=diff&rev=197541&r1=197540&r2=197541
==============================================================================
--- team/group/newcdr/configs/console.conf.sample (original)
+++ team/group/newcdr/configs/console.conf.sample Thu May 28 09:54:53 2009
@@ -5,7 +5,7 @@
[general]
; Set this option to "yes" to enable automatically answering calls on the
-; console. This is very useful if the console is used as an intercom.
+; console. This is very useful if the console is used as an intercom.
; The default value is "no".
;
;autoanswer = no
@@ -21,7 +21,7 @@
;extension = s
; Set the default CallerID for created channels.
-;
+;
;callerid = MyName Here <(256) 428-6000>
; Set the default language for created channels.
Modified: team/group/newcdr/configs/dundi.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/team/group/newcdr/configs/dundi.conf.sample?view=diff&rev=197541&r1=197540&r2=197541
==============================================================================
--- team/group/newcdr/configs/dundi.conf.sample (original)
+++ team/group/newcdr/configs/dundi.conf.sample Thu May 28 09:54:53 2009
@@ -1,6 +1,6 @@
;
; DUNDi configuration file
-;
+;
; For more information about DUNDi, see http://www.dundi.com
;
;
@@ -50,9 +50,9 @@
ttl=32
;
; If we don't get ACK to our DPDISCOVER within 2000ms, and autokill is set
-; to yes, then we cancel the whole thing (that's enough time for one
+; to yes, then we cancel the whole thing (that's enough time for one
; retransmission only). This is used to keep things from stalling for a long
-; time for a host that is not available, but would be ill advised for bad
+; time for a host that is not available, but would be ill advised for bad
; connections. In addition to 'yes' or 'no' you can also specify a number
; of milliseconds. See 'qualify' for individual peers to turn on for just
; a specific peer.
@@ -60,7 +60,7 @@
autokill=yes
;
; pbx_dundi creates a rotating key called "secret", under the family
-; 'secretpath'. The default family is dundi (resulting in
+; 'secretpath'. The default family is dundi (resulting in
; the key being held at dundi/secret).
;
;secretpath=dundi
@@ -78,8 +78,8 @@
;
; The "mappings" section maps DUNDi contexts
; to contexts on the local asterisk system. Remember
-; that numbers that are made available under the e164
-; DUNDi context are regulated by the DUNDi General Peering
+; that numbers that are made available under the e164
+; DUNDi context are regulated by the DUNDi General Peering
; Agreement (GPA) if you are a member of the DUNDi E.164
; Peering System.
;
@@ -108,14 +108,14 @@
;
; Further options may include:
;
-; nounsolicited: No unsolicited calls of any type permitted via this
+; nounsolicited: No unsolicited calls of any type permitted via this
; route
-; nocomunsolicit: No commercial unsolicited calls permitted via
+; nocomunsolicit: No commercial unsolicited calls permitted via
; this route
; residential: This number is known to be a residence
; commercial: This number is known to be a business
; mobile: This number is known to be a mobile phone
-; nocomunsolicit: No commercial unsolicited calls permitted via
+; nocomunsolicit: No commercial unsolicited calls permitted via
; this route
; nopartial: Do not search for partial matches
;
@@ -163,7 +163,7 @@
;
; host - What their host is
;
-; order - What search order to use. May be 'primary', 'secondary',
+; order - What search order to use. May be 'primary', 'secondary',
; 'tertiary' or 'quartiary'. In large systems, it is beneficial
; to only query one up-stream host in order to maximize caching
; value. Adding one with primary and one with secondary gives you
@@ -187,7 +187,7 @@
; the local system. Set "all" to deny this host to
; lookup all contexts.
;
-; model - inbound, outbound, or symmetric for whether we receive
+; model - inbound, outbound, or symmetric for whether we receive
[... 3107 lines stripped ...]
More information about the asterisk-commits
mailing list