[asterisk-commits] seanbright: branch 1.6.0 r197090 - in /branches/1.6.0: ./ configs/

SVN commits to the Asterisk project asterisk-commits at lists.digium.com
Wed May 27 11:11:17 CDT 2009


Author: seanbright
Date: Wed May 27 11:11:14 2009
New Revision: 197090

URL: http://svn.asterisk.org/svn-view/asterisk?view=rev&rev=197090
Log:
Merged revisions 197089 via svnmerge from 
https://origsvn.digium.com/svn/asterisk/trunk

........
  r197089 | seanbright | 2009-05-27 12:07:57 -0400 (Wed, 27 May 2009) | 6 lines
  
  Fix references to /etc/dahdi/system.conf and /etc/asterisk/chan_dahdi.conf in
  the sample configuration files.
  
  (closes issue #15207)
  Reported by: seandarcy
........

Modified:
    branches/1.6.0/   (props changed)
    branches/1.6.0/configs/chan_dahdi.conf.sample
    branches/1.6.0/configs/extensions.conf.sample
    branches/1.6.0/configs/sla.conf.sample
    branches/1.6.0/configs/smdi.conf.sample
    branches/1.6.0/configs/vpb.conf.sample

Propchange: branches/1.6.0/
------------------------------------------------------------------------------
Binary property 'trunk-merged' - no diff available.

Modified: branches/1.6.0/configs/chan_dahdi.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/branches/1.6.0/configs/chan_dahdi.conf.sample?view=diff&rev=197090&r1=197089&r2=197090
==============================================================================
--- branches/1.6.0/configs/chan_dahdi.conf.sample (original)
+++ branches/1.6.0/configs/chan_dahdi.conf.sample Wed May 27 11:11:14 2009
@@ -670,8 +670,9 @@
 ;progzone=uk
 ;
 ; Set the tonezone. Equivalent of the defaultzone settings in
-; /etc/dahdi.conf . This sets the tone zone by number.
-; Note that you'd still need to load tonezones (loadzone in dahdi.conf).
+; /etc/dahdi/system.conf. This sets the tone zone by number.
+; Note that you'd still need to load tonezones (loadzone in
+; /etc/dahdi/system.conf).
 ; The default is -1: not to set anything.
 ;tonezone = 0 ; 0 is US
 ;

Modified: branches/1.6.0/configs/extensions.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/branches/1.6.0/configs/extensions.conf.sample?view=diff&rev=197090&r1=197089&r2=197090
==============================================================================
--- branches/1.6.0/configs/extensions.conf.sample (original)
+++ branches/1.6.0/configs/extensions.conf.sample Wed May 27 11:11:14 2009
@@ -131,8 +131,8 @@
 TRUNK=DAHDI/G2					; Trunk interface
 ;
 ; Note the 'G2' in the TRUNK variable above. It specifies which group (defined
-; in dahdi.conf) to dial, i.e. group 2, and how to choose a channel to use in
-; the specified group. The four possible options are:
+; in chan_dahdi.conf) to dial, i.e. group 2, and how to choose a channel to use
+; in the specified group. The four possible options are:
 ;
 ; g: select the lowest-numbered non-busy DAHDI channel
 ;    (aka. ascending sequential hunt group).

Modified: branches/1.6.0/configs/sla.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/branches/1.6.0/configs/sla.conf.sample?view=diff&rev=197090&r1=197089&r2=197090
==============================================================================
--- branches/1.6.0/configs/sla.conf.sample (original)
+++ branches/1.6.0/configs/sla.conf.sample Wed May 27 11:11:14 2009
@@ -29,7 +29,7 @@
 
 ;autocontext=line1          ; This supports automatic generation of the dialplan entries 
                             ; if the autocontext option is used.  Each trunk should have 
-                            ; a unique context name.  Then, in dahdi.conf, this device 
+                            ; a unique context name.  Then, in chan_dahdi.conf, this device
                             ; should be configured to have incoming calls go to this context.
 
 ;ringtimeout=30             ; Set how long to allow this trunk to ring on an inbound call before hanging 

Modified: branches/1.6.0/configs/smdi.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/branches/1.6.0/configs/smdi.conf.sample?view=diff&rev=197090&r1=197089&r2=197090
==============================================================================
--- branches/1.6.0/configs/smdi.conf.sample (original)
+++ branches/1.6.0/configs/smdi.conf.sample Wed May 27 11:11:14 2009
@@ -2,8 +2,8 @@
 
 [interfaces]
 ; Specify serial ports to listen for SMDI messages on below.  These will be
-; referenced later in dahdi.conf.  If you do not specify any interfaces then
-; SMDI will be disabled.  Interfaces can have several different attributes
+; referenced later in chan_dahdi.conf.  If you do not specify any interfaces
+; then SMDI will be disabled.  Interfaces can have several different attributes
 ; associated with them.
 
 ; Set the number of stop bits to use per character here.  The default is no,

Modified: branches/1.6.0/configs/vpb.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/branches/1.6.0/configs/vpb.conf.sample?view=diff&rev=197090&r1=197089&r2=197090
==============================================================================
--- branches/1.6.0/configs/vpb.conf.sample (original)
+++ branches/1.6.0/configs/vpb.conf.sample Wed May 27 11:11:14 2009
@@ -97,8 +97,8 @@
 ;
 ; NOTE that other caller ID standards are supported in Asterisk, but are
 ; not yet active in chan_vpb.  It should be reasonably trivial to add
-; support for the other standards (see the default dahdi.conf for a list
-; of them) that Asterisk already handles.
+; support for the other standards (see the default chan_dahdi.conf for a
+; list of them) that Asterisk already handles.
 ;
 callerid=bell
 




More information about the asterisk-commits mailing list