No subject

The automatic overnight line tests (or manual ones) used on UK (BT) lines causes
a red alarm on a dahdi / TDM400P connected channel. This is because the line
uses voltage tests (battery loss) and polarity reversal. The polarity reversal
causes chan_dahdi to initiate v23 CallerID processing but during this the event
DAHDI_EVENT_NOALARM is ignored so that the alarm is never cleared.

(closes issue #14163)
Reported by: jedi98
Patches: 
      chan_dahdi-1.4-inalarm.diff uploaded by jedi98 (license 653)
Tested by: mattbrown, Chainsaw, mikeeccleston

Modified:
    branches/1.4/channels/chan_dahdi.c

Modified: branches/1.4/channels/chan_dahdi.c
URL: http://svnview.digium.com/svn/asterisk/branches/1.4/channels/chan_dahdi.c?view=diff&rev=250480&r1=250479&r2=250480
==============================================================================
--- branches/1.4/channels/chan_dahdi.c (original)
+++ branches/1.4/channels/chan_dahdi.c Wed Mar  3 13:04:11 2010
@@ -6653,6 +6653,9 @@
 						if (i & DAHDI_IOMUX_SIGEVENT) {
 							res = dahdi_get_event(p->subs[index].dfd);
 							ast_log(LOG_NOTICE, "Got event %d (%s)...\n", res, event2str(res));
+							if (res == DAHDI_EVENT_NOALARM) {
+								p->inalarm = 0;
+							}
 
 							if (p->cid_signalling == CID_SIG_V23_JP) {
 #ifdef DAHDI_EVENT_RINGBEGIN
@@ -6756,6 +6759,9 @@
 							if (i & DAHDI_IOMUX_SIGEVENT) {
 								res = dahdi_get_event(p->subs[index].dfd);
 								ast_log(LOG_NOTICE, "Got event %d (%s)...\n", res, event2str(res));
+								if (res == DAHDI_EVENT_NOALARM) {
+									p->inalarm = 0;
+								}
 								res = 0;
 								/* Let us detect distinctive ring */
 		
@@ -6861,6 +6867,9 @@
 					if (i & DAHDI_IOMUX_SIGEVENT) {
 						res = dahdi_get_event(p->subs[index].dfd);
 						ast_log(LOG_NOTICE, "Got event %d (%s)...\n", res, event2str(res));
+						if (res == DAHDI_EVENT_NOALARM) {
+							p->inalarm = 0;
+						}
 						/* If we get a PR event, they hung up while processing calerid */
 						if ( res == DAHDI_EVENT_POLARITY && p->hanguponpolarityswitch && p->polarity == POLARITY_REV) {
 							ast_log(LOG_DEBUG, "Hanging up due to polarity reversal on channel %d while detecting callerid\n", p->channel);
@@ -6932,6 +6941,9 @@
 						if (i & DAHDI_IOMUX_SIGEVENT) {
 							res = dahdi_get_event(p->subs[index].dfd);
 							ast_log(LOG_NOTICE, "Got event %d (%s)...\n", res, event2str(res));
+							if (res == DAHDI_EVENT_NOALARM) {
+								p->inalarm = 0;
+							}
 							res = 0;
 							/* Let us detect callerid when the telco uses distinctive ring */