[asterisk-commits] rmudgett: branch 1.6.1 r172435 - in /branches/1.6.1: ./ channels/ configs/
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Thu Jan 29 16:05:22 CST 2009
Author: rmudgett
Date: Thu Jan 29 16:05:22 2009
New Revision: 172435
URL: http://svn.digium.com/svn-view/asterisk?view=rev&rev=172435
Log:
Merged revisions 172400 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
........
r172400 | rmudgett | 2009-01-29 14:38:34 -0600 (Thu, 29 Jan 2009) | 12 lines
channels/chan_dahdi.c
* Added doxygen comments to the major dahdi structures.
* Fixed PRI and SS7 using an incorrect string value if the extension
delimiter is not present in the Dial() function.
* Fixed SS7 not checking if the dialed extension is at least as long
as the stripmsd option.
* Fixed PRI not handling unknown TON/NPI prefix letters correctly.
* Fixed some uninitialized string variables on FXS ports.
configs/chan_dahdi.conf.sample
* Updated some documentation.
........
Modified:
branches/1.6.1/ (props changed)
branches/1.6.1/channels/chan_dahdi.c
branches/1.6.1/configs/chan_dahdi.conf.sample
Propchange: branches/1.6.1/
------------------------------------------------------------------------------
Binary property 'trunk-merged' - no diff available.
Modified: branches/1.6.1/channels/chan_dahdi.c
URL: http://svn.digium.com/svn-view/asterisk/branches/1.6.1/channels/chan_dahdi.c?view=diff&rev=172435&r1=172434&r2=172435
==============================================================================
--- branches/1.6.1/channels/chan_dahdi.c (original)
+++ branches/1.6.1/channels/chan_dahdi.c Thu Jan 29 16:05:22 2009
@@ -334,6 +334,10 @@
struct dahdi_pvt;
+/*!
+ * \brief Configured ring timeout base.
+ * \note Value computed from "ringtimeout" read in from chan_dahdi.conf if it exists.
+ */
static int ringt_base = DEFAULT_RINGT;
#ifdef HAVE_SS7
@@ -416,17 +420,23 @@
struct pri *dchans[NUM_DCHANS]; /*!< Actual d-channels */
int dchanavail[NUM_DCHANS]; /*!< Whether each channel is available */
struct pri *pri; /*!< Currently active D-channel */
+ /*! \brief TRUE if to dump PRI event info (Tested but never set) */
int debug;
int fds[NUM_DCHANS]; /*!< FD's for d-channels */
+ /*! \brief Value set but not used */
int offset;
+ /*! \brief Span number put into user output messages */
int span;
+ /*! \brief TRUE if span is being reset/restarted */
int resetting;
+ /*! \brief Current position during a reset (-1 if not started) */
int resetpos;
#ifdef HAVE_PRI_INBANDDISCONNECT
unsigned int inbanddisconnect:1; /*!< Should we support inband audio after receiving DISCONNECT? */
#endif
time_t lastreset; /*!< time when unused channels were last reset */
long resetinterval; /*!< Interval (in seconds) for resetting unused channels */
+ /*! \brief ISDN signalling type (SIG_PRI, SIG_BRI, SIG_BRI_PTMP, etc...) */
int sig;
struct dahdi_pvt *pvts[MAX_CHANNELS]; /*!< Member channel pvt structs */
struct dahdi_pvt *crvs; /*!< Member CRV structs */
@@ -519,116 +529,374 @@
int buf_no; /*!< Number of buffers */
int buf_policy; /*!< Buffer policy */
int sig; /*!< Signalling style */
- int radio; /*!< radio type */
+ /*!
+ * \brief Nonzero if the signaling type is sent over a radio.
+ * \note Set to a couple of nonzero values but it is only tested like a boolean.
+ */
+ int radio;
int outsigmod; /*!< Outbound Signalling style (modifier) */
int oprmode; /*!< "Operator Services" mode */
struct dahdi_pvt *oprpeer; /*!< "Operator Services" peer tech_pvt ptr */
- float cid_rxgain; /*!< "Gain to apply during caller id */
+ /*! \brief Amount of gain to increase during caller id */
+ float cid_rxgain;
+ /*! \brief Rx gain set by chan_dahdi.conf */
float rxgain;
+ /*! \brief Tx gain set by chan_dahdi.conf */
float txgain;
int tonezone; /*!< tone zone for this chan, or -1 for default */
struct dahdi_pvt *next; /*!< Next channel in list */
struct dahdi_pvt *prev; /*!< Prev channel in list */
/* flags */
+
+ /*!
+ * \brief TRUE if ADSI (Analog Display Services Interface) available
+ * \note Set from the "adsi" value read in from chan_dahdi.conf
+ */
unsigned int adsi:1;
+ /*!
+ * \brief TRUE if we can use a polarity reversal to mark when an outgoing
+ * call is answered by the remote party.
+ * \note Set from the "answeronpolarityswitch" value read in from chan_dahdi.conf
+ */
unsigned int answeronpolarityswitch:1;
+ /*!
+ * \brief TRUE if busy detection is enabled.
+ * (Listens for the beep-beep busy pattern.)
+ * \note Set from the "busydetect" value read in from chan_dahdi.conf
+ */
unsigned int busydetect:1;
+ /*!
+ * \brief TRUE if call return is enabled.
+ * (*69, if your dialplan doesn't catch this first)
+ * \note Set from the "callreturn" value read in from chan_dahdi.conf
+ */
unsigned int callreturn:1;
+ /*!
+ * \brief TRUE if busy extensions will hear the call-waiting tone
+ * and can use hook-flash to switch between callers.
+ * \note Can be disabled by dialing *70.
+ * \note Initialized with the "callwaiting" value read in from chan_dahdi.conf
+ */
unsigned int callwaiting:1;
+ /*!
+ * \brief TRUE if send caller ID for Call Waiting
+ * \note Set from the "callwaitingcallerid" value read in from chan_dahdi.conf
+ */
unsigned int callwaitingcallerid:1;
+ /*!
+ * \brief TRUE if support for call forwarding enabled.
+ * Dial *72 to enable call forwarding.
+ * Dial *73 to disable call forwarding.
+ * \note Set from the "cancallforward" value read in from chan_dahdi.conf
+ */
unsigned int cancallforward:1;
+ /*!
+ * \brief TRUE if support for call parking is enabled.
+ * \note Set from the "canpark" value read in from chan_dahdi.conf
+ */
unsigned int canpark:1;
- unsigned int confirmanswer:1; /*!< Wait for '#' to confirm answer */
+ /*! \brief TRUE if to wait for a DTMF digit to confirm answer */
+ unsigned int confirmanswer:1;
+ /*!
+ * \brief TRUE if the channel is to be destroyed on hangup.
+ * (Used by pseudo channels.)
+ */
unsigned int destroy:1;
unsigned int didtdd:1; /*!< flag to say its done it once */
+ /*! \brief TRUE if analog type line dialed no digits in Dial() */
unsigned int dialednone:1;
+ /*! \brief TRUE if in the process of dialing digits or sending something. */
unsigned int dialing:1;
+ /*! \brief TRUE if the transfer capability of the call is digital. */
unsigned int digital:1;
+ /*! \brief TRUE if Do-Not-Disturb is enabled. */
unsigned int dnd:1;
+ /*! \brief XXX BOOLEAN Purpose??? */
unsigned int echobreak:1;
+ /*!
+ * \brief TRUE if echo cancellation enabled when bridged.
+ * \note Initialized with the "echocancelwhenbridged" value read in from chan_dahdi.conf
+ * \note Disabled if the echo canceller is not setup.
+ */
unsigned int echocanbridged:1;
+ /*! \brief TRUE if echo cancellation is turned on. */
unsigned int echocanon:1;
- unsigned int faxhandled:1; /*!< Has a fax tone already been handled? */
+ /*! \brief TRUE if a fax tone has already been handled. */
+ unsigned int faxhandled:1;
+ /*! \brief TRUE if over a radio and dahdi_read() has been called. */
unsigned int firstradio:1;
+ /*!
+ * \brief TRUE if the call will be considered "hung up" on a polarity reversal.
+ * \note Set from the "hanguponpolarityswitch" value read in from chan_dahdi.conf
+ */
unsigned int hanguponpolarityswitch:1;
+ /*! \brief TRUE if DTMF detection needs to be done by hardware. */
unsigned int hardwaredtmf:1;
+ /*!
+ * \brief TRUE if the outgoing caller ID is blocked/hidden.
+ * \note Caller ID can be disabled by dialing *67.
+ * \note Caller ID can be enabled by dialing *82.
+ * \note Initialized with the "hidecallerid" value read in from chan_dahdi.conf
+ */
unsigned int hidecallerid:1;
- unsigned int hidecalleridname:1; /*!< Hide just the name not the number for legacy PBX use */
+ /*!
+ * \brief TRUE if hide just the name not the number for legacy PBX use.
+ * \note Only applies to PRI channels.
+ * \note Set from the "hidecalleridname" value read in from chan_dahdi.conf
+ */
+ unsigned int hidecalleridname:1;
+ /*! \brief TRUE if DTMF detection is disabled. */
unsigned int ignoredtmf:1;
- unsigned int immediate:1; /*!< Answer before getting digits? */
+ /*!
+ * \brief TRUE if the channel should be answered immediately
+ * without attempting to gather any digits.
+ * \note Set from the "immediate" value read in from chan_dahdi.conf
+ */
+ unsigned int immediate:1;
+ /*! \brief TRUE if in an alarm condition. */
unsigned int inalarm:1;
- unsigned int mate:1; /*!< flag to say its in MATE mode */
+ /*! \brief TRUE if TDD in MATE mode */
+ unsigned int mate:1;
+ /*! \brief TRUE if we originated the call leg. */
unsigned int outgoing:1;
/* unsigned int overlapdial:1; unused and potentially confusing */
+ /*!
+ * \brief TRUE if busy extensions will hear the call-waiting tone
+ * and can use hook-flash to switch between callers.
+ * \note Set from the "callwaiting" value read in from chan_dahdi.conf
+ */
unsigned int permcallwaiting:1;
- unsigned int permhidecallerid:1; /*!< Whether to hide our outgoing caller ID or not */
+ /*!
+ * \brief TRUE if the outgoing caller ID is blocked/restricted/hidden.
+ * \note Set from the "hidecallerid" value read in from chan_dahdi.conf
+ */
+ unsigned int permhidecallerid:1;
+ /*!
+ * \brief TRUE if PRI congestion/busy indications are sent out-of-band.
+ * \note Set from the "priindication" value read in from chan_dahdi.conf
+ */
unsigned int priindication_oob:1;
+ /*!
+ * \brief TRUE if PRI B channels are always exclusively selected.
+ * \note Set from the "priexclusive" value read in from chan_dahdi.conf
+ */
unsigned int priexclusive:1;
+ /*!
+ * \brief TRUE if we will pulse dial.
+ * \note Set from the "pulsedial" value read in from chan_dahdi.conf
+ */
unsigned int pulse:1;
- unsigned int pulsedial:1; /*!< whether a pulse dial phone is detected */
+ /*! \brief TRUE if a pulsed digit was detected. (Pulse dial phone detected) */
+ unsigned int pulsedial:1;
unsigned int restartpending:1; /*!< flag to ensure counted only once for restart */
- unsigned int restrictcid:1; /*!< Whether restrict the callerid -> only send ANI */
+ /*!
+ * \brief TRUE if caller ID is restricted.
+ * \note Set but not used. Should be deleted. Redundant with permhidecallerid.
+ * \note Set from the "restrictcid" value read in from chan_dahdi.conf
+ */
+ unsigned int restrictcid:1;
+ /*!
+ * \brief TRUE if three way calling is enabled
+ * \note Set from the "threewaycalling" value read in from chan_dahdi.conf
+ */
unsigned int threewaycalling:1;
+ /*!
+ * \brief TRUE if call transfer is enabled
+ * \note For FXS ports (either direct analog or over T1/E1):
+ * Support flash-hook call transfer
+ * \note For digital ports using ISDN PRI protocols:
+ * Support switch-side transfer (called 2BCT, RLT or other names)
+ * \note Set from the "transfer" value read in from chan_dahdi.conf
+ */
unsigned int transfer:1;
- unsigned int use_callerid:1; /*!< Whether or not to use caller id on this channel */
- unsigned int use_callingpres:1; /*!< Whether to use the callingpres the calling switch sends */
+ /*!
+ * \brief TRUE if caller ID is used on this channel.
+ * \note PRI and SS7 spans will save caller ID from the networking peer.
+ * \note FXS ports will generate the caller ID spill.
+ * \note FXO ports will listen for the caller ID spill.
+ * \note Set from the "usecallerid" value read in from chan_dahdi.conf
+ */
+ unsigned int use_callerid:1;
+ /*!
+ * \brief TRUE if we will use the calling presentation setting
+ * from the Asterisk channel for outgoing calls.
+ * \note Only applies to PRI and SS7 channels.
+ * \note Set from the "usecallingpres" value read in from chan_dahdi.conf
+ */
+ unsigned int use_callingpres:1;
+ /*!
+ * \brief TRUE if distinctive rings are to be detected.
+ * \note For FXO lines
+ * \note Set indirectly from the "usedistinctiveringdetection" value read in from chan_dahdi.conf
+ */
unsigned int usedistinctiveringdetection:1;
- unsigned int dahditrcallerid:1; /*!< should we use the callerid from incoming call on dahdi transfer or not */
- unsigned int transfertobusy:1; /*!< allow flash-transfers to busy channels */
- unsigned int mwimonitor_neon:1; /*!< monitor this FXO port for neon type MWI indication from other end */
- unsigned int mwimonitor_fsk:1; /*!< monitor this FXO port for fsk MWI indication from other end */
- unsigned int mwimonitor_rpas:1; /*!< monitor this FXO port for rpas precursor to fsk MWI indication */
- unsigned int mwimonitoractive:1; /*!< an MWI monitor thread is currently active */
- unsigned int mwisendactive:1; /*!< a MWI message sending thread is active */
- /* Channel state or unavilability flags */
+ /*!
+ * \brief TRUE if we should use the callerid from incoming call on dahdi transfer.
+ * \note Set from the "useincomingcalleridondahditransfer" value read in from chan_dahdi.conf
+ */
+ unsigned int dahditrcallerid:1;
+ /*!
+ * \brief TRUE if allowed to flash-transfer to busy channels.
+ * \note Set from the "transfertobusy" value read in from chan_dahdi.conf
+ */
+ unsigned int transfertobusy:1;
+ /*!
+ * \brief TRUE if the FXO port monitors for neon type MWI indications from the other end.
+ * \note Set if the "mwimonitor" value read in contains "neon" from chan_dahdi.conf
+ */
+ unsigned int mwimonitor_neon:1;
+ /*!
+ * \brief TRUE if the FXO port monitors for fsk type MWI indications from the other end.
+ * \note Set if the "mwimonitor" value read in contains "fsk" from chan_dahdi.conf
+ */
+ unsigned int mwimonitor_fsk:1;
+ /*!
+ * \brief TRUE if the FXO port monitors for rpas precursor to fsk MWI indications from the other end.
+ * \note RPAS - Ring Pulse Alert Signal
+ * \note Set if the "mwimonitor" value read in contains "rpas" from chan_dahdi.conf
+ */
+ unsigned int mwimonitor_rpas:1;
+ /*! \brief TRUE if an MWI monitor thread is currently active */
+ unsigned int mwimonitoractive:1;
+ /*! \brief TRUE if a MWI message sending thread is active */
+ unsigned int mwisendactive:1;
+ /*!
+ * \brief TRUE if channel is out of reset and ready
+ * \note Set but not used.
+ */
unsigned int inservice:1;
+ /*!
+ * \brief TRUE if the channel is locally blocked.
+ * \note Applies to SS7 channels.
+ */
unsigned int locallyblocked:1;
+ /*!
+ * \brief TRUE if the channel is remotely blocked.
+ * \note Applies to SS7 channels.
+ */
unsigned int remotelyblocked:1;
#if defined(HAVE_PRI) || defined(HAVE_SS7)
- unsigned int rlt:1;
+ /*!
+ * \brief XXX BOOLEAN Purpose???
+ * \note Applies to SS7 channels.
+ */
+ unsigned int rlt:1;
+ /*! \brief TRUE if channel is alerting/ringing */
unsigned int alerting:1;
+ /*! \brief TRUE if the call has already gone/hungup */
unsigned int alreadyhungup:1;
+ /*!
+ * \brief TRUE if this is an idle call
+ * \note Applies to PRI channels.
+ */
unsigned int isidlecall:1;
+ /*!
+ * \brief TRUE if call is in a proceeding state.
+ * The call has started working its way through the network.
+ */
unsigned int proceeding:1;
+ /*! \brief TRUE if the call has seen progress through the network. */
unsigned int progress:1;
+ /*!
+ * \brief TRUE if this channel is being reset/restarted
+ * \note Applies to PRI channels.
+ */
unsigned int resetting:1;
+ /*!
+ * \brief TRUE if this channel has received a SETUP_ACKNOWLEDGE
+ * \note Applies to PRI channels.
+ */
unsigned int setup_ack:1;
#endif
- unsigned int use_smdi:1; /* Whether to use SMDI on this channel */
- struct ast_smdi_interface *smdi_iface; /* The serial port to listen for SMDI data on */
-
+ /*!
+ * \brief TRUE if SMDI (Simplified Message Desk Interface) is enabled
+ * \note Set from the "usesmdi" value read in from chan_dahdi.conf
+ */
+ unsigned int use_smdi:1;
+ /*! \brief The serial port to listen for SMDI data on */
+ struct ast_smdi_interface *smdi_iface;
+
+ /*! \brief Distinctive Ring data */
struct dahdi_distRings drings;
+ /*!
+ * \brief The configured context for incoming calls.
+ * \note The "context" string read in from chan_dahdi.conf
+ */
char context[AST_MAX_CONTEXT];
+ /*!
+ * \brief Saved context string.
+ */
char defcontext[AST_MAX_CONTEXT];
+ /*! \brief Extension to use in the dialplan. */
char exten[AST_MAX_EXTENSION];
+ /*!
+ * \brief Language configured for calls.
+ * \note The "language" string read in from chan_dahdi.conf
+ */
char language[MAX_LANGUAGE];
+ /*!
+ * \brief The configured music-on-hold class to use for calls.
+ * \note The "musicclass" or "mohinterpret" or "musiconhold" string read in from chan_dahdi.conf
+ */
char mohinterpret[MAX_MUSICCLASS];
+ /*!
+ * \brief Sugggested music-on-hold class for peer channel to use for calls.
+ * \note The "mohsuggest" string read in from chan_dahdi.conf
+ */
char mohsuggest[MAX_MUSICCLASS];
char parkinglot[AST_MAX_EXTENSION]; /*!< Parking lot for this channel */
#if defined(PRI_ANI) || defined(HAVE_SS7)
+ /*! \brief Automatic Number Identification number (Alternate PRI caller ID number) */
char cid_ani[AST_MAX_EXTENSION];
#endif
+ /*! \brief Automatic Number Identification code from PRI */
int cid_ani2;
+ /*! \brief Caller ID number from an incoming call. */
char cid_num[AST_MAX_EXTENSION];
- int cid_ton; /*!< Type Of Number (TON) */
+ /*! \brief Caller ID Q.931 TON/NPI field values. Set by PRI. Zero otherwise. */
+ int cid_ton;
+ /*! \brief Caller ID name from an incoming call. */
char cid_name[AST_MAX_EXTENSION];
+ /*! \brief Last Caller ID number from an incoming call. */
char lastcid_num[AST_MAX_EXTENSION];
+ /*! \brief Last Caller ID name from an incoming call. */
char lastcid_name[AST_MAX_EXTENSION];
char *origcid_num; /*!< malloced original callerid */
char *origcid_name; /*!< malloced original callerid */
+ /*! \brief Call waiting number. */
char callwait_num[AST_MAX_EXTENSION];
+ /*! \brief Call waiting name. */
char callwait_name[AST_MAX_EXTENSION];
+ /*! \brief Redirecting Directory Number Information Service (RDNIS) number */
char rdnis[AST_MAX_EXTENSION];
+ /*! \brief Dialed Number Identifier */
char dnid[AST_MAX_EXTENSION];
+ /*!
+ * \brief Bitmapped groups this belongs to.
+ * \note The "group" bitmapped group string read in from chan_dahdi.conf
+ */
ast_group_t group;
+ /*! \brief Active PCM encoding format: DAHDI_LAW_ALAW or DAHDI_LAW_MULAW */
int law;
int confno; /*!< Our conference */
int confusers; /*!< Who is using our conference */
int propconfno; /*!< Propagated conference number */
+ /*!
+ * \brief Bitmapped call groups this belongs to.
+ * \note The "callgroup" bitmapped group string read in from chan_dahdi.conf
+ */
ast_group_t callgroup;
+ /*!
+ * \brief Bitmapped pickup groups this belongs to.
+ * \note The "pickupgroup" bitmapped group string read in from chan_dahdi.conf
+ */
ast_group_t pickupgroup;
+ /*!
+ * \brief Channel variable list with associated values to set when a channel is created.
+ * \note The "setvar" strings read in from chan_dahdi.conf
+ */
struct ast_variable *vars;
int channel; /*!< Channel Number or CRV */
int span; /*!< Span number */
@@ -638,58 +906,128 @@
int callingpres; /*!< The value of callling presentation that we're going to use when placing a PRI call */
int callwaitingrepeat; /*!< How many samples to wait before repeating call waiting */
int cidcwexpire; /*!< When to expire our muting for CID/CW */
+ /*! \brief Analog caller ID waveform sample buffer */
unsigned char *cidspill;
+ /*! \brief Position in the cidspill buffer to send out next. */
int cidpos;
+ /*! \brief Length of the cidspill buffer containing samples. */
int cidlen;
+ /*! \brief Ring timeout timer?? */
int ringt;
+ /*!
+ * \brief Ring timeout base.
+ * \note Value computed indirectly from "ringtimeout" read in from chan_dahdi.conf
+ */
int ringt_base;
+ /*!
+ * \brief Number of most significant digits/characters to strip from the dialed number.
+ * \note Feature is deprecated. Use dialplan logic.
+ * \note The characters are stripped before the PRI TON/NPI prefix
+ * characters are processed.
+ */
int stripmsd;
+ /*! \brief BOOLEAN. XXX Meaning what?? */
int callwaitcas;
+ /*! \brief Number of call waiting rings. */
int callwaitrings;
+ /*! \brief Echo cancel parameters. */
struct {
struct dahdi_echocanparams head;
struct dahdi_echocanparam params[DAHDI_MAX_ECHOCANPARAMS];
} echocancel;
+ /*!
+ * \brief Echo training time. 0 = disabled
+ * \note Set from the "echotraining" value read in from chan_dahdi.conf
+ */
int echotraining;
+ /*! \brief Filled with 'w'. XXX Purpose?? */
char echorest[20];
+ /*!
+ * \brief Number of times to see "busy" tone before hanging up.
+ * \note Set from the "busycount" value read in from chan_dahdi.conf
+ */
int busycount;
+ /*!
+ * \brief Length of "busy" tone on time.
+ * \note Set from the "busypattern" value read in from chan_dahdi.conf
+ */
int busy_tonelength;
+ /*!
+ * \brief Length of "busy" tone off time.
+ * \note Set from the "busypattern" value read in from chan_dahdi.conf
+ */
int busy_quietlength;
+ /*!
+ * \brief Bitmapped call progress detection flags. CALLPROGRESS_xxx values.
+ * \note Bits set from the "callprogress" and "faxdetect" values read in from chan_dahdi.conf
+ */
int callprogress;
struct timeval flashtime; /*!< Last flash-hook time */
+ /*! \brief Opaque DSP configuration structure. */
struct ast_dsp *dsp;
- int cref; /*!< Call reference number */
+ //int cref; /*!< Call reference number (Not used) */
+ /*! \brief DAHDI dial operation command struct for ioctl() call. */
struct dahdi_dialoperation dop;
int whichwink; /*!< SIG_FEATDMF_TA Which wink are we on? */
+ /*! \brief Second part of SIG_FEATDMF_TA wink operation. */
char finaldial[64];
char accountcode[AST_MAX_ACCOUNT_CODE]; /*!< Account code */
int amaflags; /*!< AMA Flags */
struct tdd_state *tdd; /*!< TDD flag */
+ /*! \brief Accumulated call forwarding number. */
char call_forward[AST_MAX_EXTENSION];
+ /*!
+ * \brief Voice mailbox location.
+ * \note Set from the "mailbox" string read in from chan_dahdi.conf
+ */
char mailbox[AST_MAX_EXTENSION];
+ /*! \brief Opaque event subscription parameters for message waiting indication support. */
struct ast_event_sub *mwi_event_sub;
+ /*! \brief Delayed dialing for E911. Overlap digits for ISDN. */
char dialdest[256];
+ /*! \brief Time the interface went on-hook. */
int onhooktime;
+ /*! \brief -1 = unknown, 0 = no messages, 1 = new messages available */
int msgstate;
int distinctivering; /*!< Which distinctivering to use */
int cidrings; /*!< Which ring to deliver CID on */
int dtmfrelax; /*!< whether to run in relaxed DTMF mode */
+ /*! \brief Holding place for event injected from outside normal operation. */
int fake_event;
+ /*!
+ * \brief Minimal time period (ms) between the answer polarity
+ * switch and hangup polarity switch.
+ */
int polarityonanswerdelay;
+ /*! \brief Start delay time if polarityonanswerdelay is nonzero. */
struct timeval polaritydelaytv;
+ /*!
+ * \brief Send caller ID after this many rings.
+ * \note Set from the "sendcalleridafter" value read in from chan_dahdi.conf
+ */
int sendcalleridafter;
#ifdef HAVE_PRI
+ /*! \brief DAHDI PRI control parameters */
struct dahdi_pri *pri;
+ /*! \brief XXX Purpose??? */
struct dahdi_pvt *bearer;
+ /*! \brief XXX Purpose??? */
struct dahdi_pvt *realcall;
+ /*! \brief Opaque libpri call control structure */
q931_call *call;
+ /*! \brief Channel number in span. */
int prioffset;
+ /*! \brief Logical span number within trunk group */
int logicalspan;
#endif
+ /*! \brief Current line interface polarity. POLARITY_IDLE, POLARITY_REV */
int polarity;
+ /*! \brief DSP feature flags: DSP_FEATURE_xxx */
int dsp_features;
#ifdef HAVE_SS7
+ /*! \brief SS7 control parameters */
struct dahdi_ss7 *ss7;
+ /*! \brief Opaque libss7 call control structure */
struct isup_call *ss7call;
char charge_number[50];
char gen_add_number[50];
@@ -716,7 +1054,9 @@
unsigned int dpc; /*!< CIC's DPC */
unsigned int loopedback:1;
#endif
+ /*! \brief DTMF digit in progress. 0 when no digit in progress. */
char begindigit;
+ /*! \brief TRUE if confrence is muted. */
int muting;
} *iflist = NULL, *ifend = NULL;
@@ -742,6 +1082,10 @@
struct dahdi_params timing;
int is_sig_auto; /*!< Use channel signalling from DAHDI? */
+ /*!
+ * \brief The serial port to listen for SMDI data on
+ * \note Set from the "smdiport" string read in from chan_dahdi.conf
+ */
char smdi_port[SMDI_MAX_FILENAME_LEN];
};
@@ -2402,10 +2746,16 @@
const char *send_far = NULL;
c = strchr(dest, '/');
- if (c)
+ if (c) {
c++;
- else
- c = dest;
+ } else {
+ c = "";
+ }
+ if (strlen(c) < p->stripmsd) {
+ ast_log(LOG_WARNING, "Number '%s' is shorter than stripmsd (%d)\n", c, p->stripmsd);
+ ast_mutex_unlock(&p->lock);
+ return -1;
+ }
if (!p->hidecallerid) {
l = ast->cid.cid_num;
@@ -2529,14 +2879,14 @@
int redirect_reason;
c = strchr(dest, '/');
- if (c)
+ if (c) {
c++;
- else
- c = dest;
+ } else {
+ c = "";
+ }
l = NULL;
n = NULL;
-
if (!p->hidecallerid) {
l = ast->cid.cid_num;
if (!p->hidecalleridname) {
@@ -2669,8 +3019,11 @@
pridialplan = PRI_NPI_RESERVED | (pridialplan & 0xf0);
break;
default:
- if (isalpha(*c))
- ast_log(LOG_WARNING, "Unrecognized pridialplan %s modifier: %c\n", *c > 'Z' ? "NPI" : "TON", *c);
+ if (isalpha(c[p->stripmsd])) {
+ ast_log(LOG_WARNING, "Unrecognized pridialplan %s modifier: %c\n",
+ c[p->stripmsd] > 'Z' ? "NPI" : "TON", c[p->stripmsd]);
+ }
+ break;
}
c++;
}
@@ -2739,8 +3092,12 @@
prilocaldialplan = PRI_NPI_RESERVED | (prilocaldialplan & 0xf0);
break;
default:
- if (isalpha(*l))
- ast_log(LOG_WARNING, "Unrecognized prilocaldialplan %s modifier: %c\n", *c > 'Z' ? "NPI" : "TON", *c);
+ if (isalpha(*l)) {
+ ast_log(LOG_WARNING,
+ "Unrecognized prilocaldialplan %s modifier: %c\n",
+ *l > 'Z' ? "NPI" : "TON", *l);
+ }
+ break;
}
l++;
}
@@ -3058,8 +3415,7 @@
}
if (p->dsp)
ast_dsp_set_digitmode(p->dsp, DSP_DIGITMODE_DTMF | p->dtmfrelax);
- if (p->exten)
- p->exten[0] = '\0';
+ p->exten[0] = '\0';
ast_debug(1, "Hangup: channel: %d index = %d, normal = %d, callwait = %d, thirdcall = %d\n",
p->channel, idx, p->subs[SUB_REAL].dfd, p->subs[SUB_CALLWAIT].dfd, p->subs[SUB_THREEWAY].dfd);
@@ -3543,7 +3899,8 @@
dahdi_disable_ec(p);
/* otherwise, turn it on */
if (!p->didtdd) { /* if havent done it yet */
- unsigned char mybuf[41000], *buf;
+ unsigned char mybuf[41000];/*! \todo XXX This is an abuse of the stack!! */
+ unsigned char *buf;
int size, res, fd, len;
struct pollfd fds[1];
@@ -4266,7 +4623,7 @@
} else if (f->subclass == 'f') {
/* Fax tone -- Handle and return NULL */
if ((p->callprogress & CALLPROGRESS_FAX) && !p->faxhandled) {
- p->faxhandled++;
+ p->faxhandled = 1;
if (strcmp(ast->exten, "fax")) {
const char *target_context = S_OR(ast->macrocontext, ast->context);
@@ -4863,14 +5220,16 @@
}
p->subs[SUB_REAL].needunhold = 1;
} else if (!p->subs[SUB_THREEWAY].owner) {
- char cid_num[256];
- char cid_name[256];
-
if (!p->threewaycalling) {
/* Just send a flash if no 3-way calling */
p->subs[SUB_REAL].needflash = 1;
goto winkflashdone;
} else if (!check_for_conference(p)) {
+ char cid_num[256];
+ char cid_name[256];
+
+ cid_num[0] = 0;
+ cid_name[0] = 0;
if (p->dahditrcallerid && p->owner) {
if (p->owner->cid.cid_num)
ast_copy_string(cid_num, p->owner->cid.cid_num, sizeof(cid_num));
@@ -6965,7 +7324,7 @@
/* We must have a ring by now, so, if configured, lets try to listen for
* distinctive ringing */
- if (p->usedistinctiveringdetection == 1) {
+ if (p->usedistinctiveringdetection) {
len = 0;
distMatches = 0;
/* Clear the current ring data array so we dont have old data in it. */
@@ -7242,7 +7601,7 @@
}
}
}
- if (p->usedistinctiveringdetection == 1) {
+ if (p->usedistinctiveringdetection) {
/* this only shows up if you have n of the dring patterns filled in */
ast_verb(3, "Detected ring pattern: %d,%d,%d\n",curRingData[0],curRingData[1],curRingData[2]);
@@ -9073,6 +9432,23 @@
int channelmatched = 0;
int groupmatched = 0;
+ /*
+ * data is ---v
+ * Dial(DAHDI/pseudo[/extension])
+ * Dial(DAHDI/<channel#>[c|r<cadance#>|d][/extension])
+ * Dial(DAHDI/<trunk_group#>:<crv#>[c|r<cadance#>|d][/extension])
+ * Dial(DAHDI/(g|G|r|R)<group#(0-63)>[c|r<cadance#>|d][/extension])
+ *
+ * g - channel group allocation search forward
+ * G - channel group allocation search backward
+ * r - channel group allocation round robin search forward
+ * R - channel group allocation round robin search backward
+ *
+ * c - Wait for DTMF digit to confirm answer
+ * r<cadance#> - Set distintive ring cadance number
+ * d - Force bearer capability for ISDN/SS7 call to digital.
+ */
+
/* Assume we're locking the iflock */
lock = &iflock;
start = iflist;
@@ -9085,8 +9461,9 @@
}
if (toupper(dest[0]) == 'G' || toupper(dest[0])=='R') {
/* Retrieve the group number */
- char *stringp=NULL;
- stringp=dest + 1;
+ char *stringp;
+
+ stringp = dest + 1;
s = strsep(&stringp, "/");
if ((res = sscanf(s, "%d%c%d", &x, &opt, &y)) < 1) {
ast_log(LOG_WARNING, "Unable to determine group for data %s\n", (char *)data);
@@ -9113,8 +9490,9 @@
roundrobin = 1;
}
} else {
- char *stringp=NULL;
- stringp=dest;
+ char *stringp;
+
+ stringp = dest;
s = strsep(&stringp, "/");
p = iflist;
if (!strcasecmp(s, "pseudo")) {
Modified: branches/1.6.1/configs/chan_dahdi.conf.sample
URL: http://svn.digium.com/svn-view/asterisk/branches/1.6.1/configs/chan_dahdi.conf.sample?view=diff&rev=172435&r1=172434&r2=172435
==============================================================================
--- branches/1.6.1/configs/chan_dahdi.conf.sample (original)
+++ branches/1.6.1/configs/chan_dahdi.conf.sample Thu Jan 29 16:05:22 2009
@@ -388,12 +388,14 @@
; Whether or not restrict outgoing caller ID (will be sent as ANI only, not
; available for the user)
; Mostly use with FXS ports
+; Does nothing. Use hidecallerid instead.
;
;restrictcid=no
;
-; Whether or not use the caller ID presentation for the outgoing call that the
-; calling switch is sending.
-; See README.callingpres. FIXME: file no longer exists.
+; Whether or not to use the caller ID presentation from the Asterisk channel
+; for outgoing calls.
+; See dialplan function CALLERID(pres) for more information.
+; Only applies to PRI and SS7 channels.
;
usecallingpres=yes
;
More information about the asterisk-commits
mailing list