[asterisk-commits] russell: trunk r186953 - in /trunk: ./ contrib/ include/asterisk/ include/ast...
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Wed Apr 8 08:25:01 CDT 2009
Author: russell
Date: Wed Apr 8 08:24:48 2009
New Revision: 186953
URL: http://svn.digium.com/svn-view/asterisk?view=rev&rev=186953
Log:
Start splitting up miscellaneous doxygen documentation into separate files.
doxyref.h was created to hold miscellaneous documentation that was not specific
to a part of the code. This file has grown quite a bit so I decided to start
splitting parts of it out into new files. Now, you can drop a new file into
include/asterisk/doxygen/ and it will be processed by doxygen.
Added:
trunk/include/asterisk/doxygen/
trunk/include/asterisk/doxygen/commits.h (with props)
trunk/include/asterisk/doxygen/licensing.h (with props)
trunk/include/asterisk/doxygen/releases.h (with props)
Modified:
trunk/Makefile
trunk/contrib/asterisk-ng-doxygen
trunk/include/asterisk/doxyref.h
trunk/main/asterisk.c
Modified: trunk/Makefile
URL: http://svn.digium.com/svn-view/asterisk/trunk/Makefile?view=diff&rev=186953&r1=186952&r2=186953
==============================================================================
--- trunk/Makefile (original)
+++ trunk/Makefile Wed Apr 8 08:24:48 2009
@@ -559,8 +559,10 @@
chmod 755 $(DESTDIR)$(ASTSBINDIR)/safe_asterisk;\
fi
$(INSTALL) -d $(DESTDIR)$(ASTHEADERDIR)
+ $(INSTALL) -d $(DESTDIR)$(ASTHEADERDIR)/doxygen
$(INSTALL) -m 644 include/asterisk.h $(DESTDIR)$(includedir)
$(INSTALL) -m 644 include/asterisk/*.h $(DESTDIR)$(ASTHEADERDIR)
+ $(INSTALL) -m 644 include/asterisk/doxygen/*.h $(DESTDIR)$(ASTHEADERDIR)/doxygen
if [ -n "$(OLDHEADERS)" ]; then \
rm -f $(addprefix $(DESTDIR)$(ASTHEADERDIR)/,$(OLDHEADERS)) ;\
fi
Modified: trunk/contrib/asterisk-ng-doxygen
URL: http://svn.digium.com/svn-view/asterisk/trunk/contrib/asterisk-ng-doxygen?view=diff&rev=186953&r1=186952&r2=186953
==============================================================================
--- trunk/contrib/asterisk-ng-doxygen (original)
+++ trunk/contrib/asterisk-ng-doxygen Wed Apr 8 08:24:48 2009
@@ -475,6 +475,7 @@
funcs \
include \
include/asterisk \
+ include/asterisk/doxygen \
main \
main/stdtime \
pbx \
Added: trunk/include/asterisk/doxygen/commits.h
URL: http://svn.digium.com/svn-view/asterisk/trunk/include/asterisk/doxygen/commits.h?view=auto&rev=186953
==============================================================================
--- trunk/include/asterisk/doxygen/commits.h (added)
+++ trunk/include/asterisk/doxygen/commits.h Wed Apr 8 08:24:48 2009
@@ -1,0 +1,114 @@
+/*
+ * Asterisk -- An open source telephony toolkit.
+ *
+ * Copyright (C) 1999 - 2009, Digium, Inc.
+ *
+ * See http://www.asterisk.org for more information about
+ * the Asterisk project. Please do not directly contact
+ * any of the maintainers of this project for assistance;
+ * the project provides a web site, mailing lists and IRC
+ * channels for your use.
+ *
+ * This program is free software, distributed under the terms of
+ * the GNU General Public License Version 2. See the LICENSE file
+ * at the top of the source tree.
+ */
+
+/*!
+ * \file
+ */
+
+/*!
+ * \page CommitMessages Guidelines for Commit Messages
+ *
+ * \AsteriskTrunkWarning
+ *
+ * <hr/>
+ *
+ * \section CommitMsgFormatting Commit Message Formatting
+ *
+ * The following illustrates the basic outline for commit messages:
+ *
+ \verbatim
+ <One-liner summary of changes>
+
+ <Verbose description of the changes>
+
+ <Special Tags>
+ \endverbatim
+ *
+ * Some commit history viewers treat the first line of commit messages as the
+ * summary for the commit. So, an effort should be made to format our commit
+ * messages in that fashion. The verbose description may contain multiple
+ * paragraphs, itemized lists, etc. Always end the first sentence (and any
+ * subsequent sentences) with punctuation.
+ *
+ * Commit messages should be wrapped at 80 %columns.
+ *
+ * \note For trivial commits, such as "fix the build", or "fix spelling mistake",
+ * the verbose description may not be necessary.
+ *
+ * <hr/>
+ *
+ * \section CommitMsgTags Special Tags for Commit Messages
+ *
+ * \subsection MantisTags Mantis (http://bugs.digium.com/)
+ *
+ * To have a commit noted in an issue, use a tag of the form:
+ * \arg (issue #1234)
+ *
+ * To have a commit automatically close an issue, use a tag of the form:
+ * \arg (closes issue #1234)
+ *
+ * When making a commit for a mantis issue, it is easiest to use the
+ * provided commit %message template functionality. It will format the
+ * special tags appropriately, and will also include information about who
+ * reported the issue, which patches are being applied, and who did testing.
+ *
+ * Assuming that you have bug marshal access (and if you have commit access,
+ * it is pretty safe to assume that you do), you will find the commit %message
+ * template section directly below the issue details section and above the
+ * issue relationships section. You will have to click the '+' next to
+ * "Commit message template" to make the contents of the section visible.
+ *
+ * Here is an example of what the template will generate for you:
+ *
+ \verbatim
+ (closes issue #1234)
+ Reported by: SomeGuy
+ Patches:
+ fix_bug_1234.diff uploaded by SomeDeveloper (license 5678)
+ \endverbatim
+ *
+ * If the patch being committed was written by the person doing the commit,
+ * and is not available to reference as an upload to the issue, there is no
+ * need to include something like "fixed by me", as that will be the default
+ * assumption when a specific patch is not referenced.
+ *
+ * \subsection ReviewBoardTags Review Board (http://reviewboard.digium.com/)
+ *
+ * To have a commit set a review request as submitted, include the full URL
+ * to the review request. For example:
+ * \arg Review: %http://reviewboard.digium.com/r/95/
+ *
+ * \note The trailing slash in the review URL is required.
+ *
+ * <hr/>
+ *
+ * \section CommitMsgSvnmerge Commit Messages with svnmerge
+ *
+ * When using the svnmerge tool for merging changes between branches, use the
+ * commit %message generated by svnmerge. The '-f' option to svnmerge allows
+ * you to specify a file for svnmerge to write out a commit %message to. The
+ * '-F' option to svn commit allows you to specify a file that contains the
+ * commit %message.
+ *
+ * If you are using the expect script wrappers for svnmerge from repotools,
+ * a commit %message is automatically placed in the file '../merge.msg'.
+ *
+ * For more detailed information about working with branches and merging,
+ * see the following page on %asterisk.org:
+ * \arg http://www.asterisk.org/developers/svn-branching-merging
+ */
+
+
Propchange: trunk/include/asterisk/doxygen/commits.h
------------------------------------------------------------------------------
svn:eol-style = native
Propchange: trunk/include/asterisk/doxygen/commits.h
------------------------------------------------------------------------------
svn:keywords = Author Date Id Revision
Propchange: trunk/include/asterisk/doxygen/commits.h
------------------------------------------------------------------------------
svn:mime-type = text/plain
Added: trunk/include/asterisk/doxygen/licensing.h
URL: http://svn.digium.com/svn-view/asterisk/trunk/include/asterisk/doxygen/licensing.h?view=auto&rev=186953
==============================================================================
--- trunk/include/asterisk/doxygen/licensing.h (added)
+++ trunk/include/asterisk/doxygen/licensing.h Wed Apr 8 08:24:48 2009
@@ -1,0 +1,153 @@
+/*
+ * Asterisk -- An open source telephony toolkit.
+ *
+ * Copyright (C) 1999 - 2009, Digium, Inc.
+ *
+ * See http://www.asterisk.org for more information about
+ * the Asterisk project. Please do not directly contact
+ * any of the maintainers of this project for assistance;
+ * the project provides a web site, mailing lists and IRC
+ * channels for your use.
+ *
+ * This program is free software, distributed under the terms of
+ * the GNU General Public License Version 2. See the LICENSE file
+ * at the top of the source tree.
+ */
+
+/*!
+ * \file
+ */
+
+/*!
+ * \page Licensing Asterisk Licensing Information
+ *
+ * \section license Asterisk License
+ * \verbinclude LICENSE
+ *
+ * \section otherlicenses Licensing of 3rd Party Code
+ *
+ * This section contains a (not yet complete) list of libraries that are used
+ * by various parts of Asterisk, including related licensing information.
+ *
+ * \subsection alsa_lib ALSA Library
+ * \arg <b>Library</b>: libasound
+ * \arg <b>Website</b>: http://www.alsa-project.org
+ * \arg <b>Used by</b>: chan_alsa
+ * \arg <b>License</b>: LGPL
+ *
+ * \subsection openssl_lib OpenSSL
+ * \arg <b>Library</b>: libcrypto, libssl
+ * \arg <b>Website</b>: http://www.openssl.org
+ * \arg <b>Used by</b>: Asterisk core (TLS for manager and HTTP), res_crypto
+ * \arg <b>License</b>: Apache 2.0
+ * \arg <b>Note</b>: An exception has been granted to allow linking of
+ * OpenSSL with Asterisk.
+ *
+ * \subsection curl_lib Curl
+ * \arg <b>Library</b>: libcurl
+ * \arg <b>Website</b>: http://curl.haxx.se
+ * \arg <b>Used by</b>: func_curl, res_config_curl, res_curl
+ * \arg <b>License</b>: BSD
+ *
+ * \subsection portaudio_lib PortAudio
+ * \arg <b>Library</b>: libportaudio
+ * \arg <b>Website</b>: http://www.portaudio.com
+ * \arg <b>Used by</b>: chan_console
+ * \arg <b>License</b>: BSD
+ * \arg <b>Note</b>: Even though PortAudio is licensed under a BSD style
+ * license, PortAudio will make use of some audio interface,
+ * depending on how it was built. That audio interface may
+ * introduce additional licensing restrictions. On Linux,
+ * this would most commonly be ALSA: \ref alsa_lib.
+ *
+ * \subsection rawlist Raw list of libraries that used by any part of Asterisk
+ * \li c-client.a (app_voicemail with IMAP support)
+ * \li libSDL-1.2.so.0
+ * \li libSaClm.so.2
+ * \li libSaEvt.so.2
+ * \li libX11.so.6
+ * \li libXau.so.6
+ * \li libXdmcp.so.6
+ * \li libasound.so.2
+ * \li libc.so.6
+ * \li libcom_err.so.2
+ * \li libcrypt.so.1
+ * \li libcrypto.so.0.9.8 (chan_h323)
+ * \li libcurl.so.4
+ * \li libdirect-1.0.so.0
+ * \li libdirectfb-1.0.so.0
+ * \li libdl.so.2
+ * \li libexpat.so (chan_h323)
+ * \li libfusion-1.0.so.0
+ * \li libgcc_s.so (chan_h323)
+ * \li libgcrypt.so.11 (chan_h323)
+ * \li libglib-2.0.so.0
+ * \li libgmime-2.0.so.2
+ * \li libgmodule-2.0.so.0
+ * \li libgnutls.so.13 (chan_h323)
+ * \li libgobject-2.0.so.0
+ * \li libgpg-error.so.0 (chan_h323)
+ * \li libgssapi_krb5.so.2
+ * \li libgthread-2.0.so.0
+ * \li libidn.so.11
+ * \li libiksemel.so.3
+ * \li libisdnnet.so
+ * \li libjack.so.0
+ * \li libjpeg.so.62
+ * \li libk5crypto.so.3
+ * \li libkeyutils.so.1
+ * \li libkrb5.so.3
+ * \li libkrb5support.so.0
+ * \li liblber-2.4.so.2 (chan_h323)
+ * \li libldap_r-2.4.so.2 (chan_h323)
+ * \li libltdl.so.3
+ * \li liblua5.1.so.0
+ * \li libm.so.6
+ * \li libmISDN.so
+ * \li libnbs.so.1
+ * \li libncurses.so.5
+ * \li libnetsnmp.so.15
+ * \li libnetsnmpagent.so.15
+ * \li libnetsnmphelpers.so.15
+ * \li libnetsnmpmibs.so.15
+ * \li libnsl.so.1
+ * \li libodbc.so.1
+ * \li libogg.so.0
+ * \li libopenh323.so (chan_h323)
+ * \li libpcre.so.3
+ * \li libperl.so.5.8
+ * \li libportaudio.so.2
+ * \li libpq.so.5
+ * \li libpri.so.1.4
+ * \li libpt.so (chan_h323)
+ * \li libpthread.so.0
+ * \li libradiusclient-ng.so.2
+ * \li libresample.so.1.0
+ * \li libresolv.so.2 (chan_h323)
+ * \li librt.so.1
+ * \li libsasl2.so.2 (chan_h323)
+ * \li libselinux.so.1
+ * \li libsensors.so.3
+ * \li libspandsp.so.1
+ * \li libspeex.so.1
+ * \li libsqlite.so.0
+ * \li libsqlite3.so.0
+ * \li libss7.so.1
+ * \li libssl.so.0.9.8 (chan_h323)
+ * \li libstdc++.so (chan_h323, chan_vpb)
+ * \li libsuppserv.so
+ * \li libsybdb.so.5
+ * \li libsysfs.so.2
+ * \li libtasn1.so.3 (chan_h323)
+ * \li libtds.so.4
+ * \li libtiff.so.4
+ * \li libtonezone.so.1.0
+ * \li libvorbis.so.0
+ * \li libvorbisenc.so.2
+ * \li libvpb.a (chan_vpb)
+ * \li libwrap.so.0
+ * \li libxcb-xlib.so.0
+ * \li libxcb.so.1
+ * \li libz.so.1 (chan_h323)
+ * \li linux-vdso.so.1
+*/
Propchange: trunk/include/asterisk/doxygen/licensing.h
------------------------------------------------------------------------------
svn:eol-style = native
Propchange: trunk/include/asterisk/doxygen/licensing.h
------------------------------------------------------------------------------
svn:keywords = Author Date Id Revision
Propchange: trunk/include/asterisk/doxygen/licensing.h
------------------------------------------------------------------------------
svn:mime-type = text/plain
Added: trunk/include/asterisk/doxygen/releases.h
URL: http://svn.digium.com/svn-view/asterisk/trunk/include/asterisk/doxygen/releases.h?view=auto&rev=186953
==============================================================================
--- trunk/include/asterisk/doxygen/releases.h (added)
+++ trunk/include/asterisk/doxygen/releases.h Wed Apr 8 08:24:48 2009
@@ -1,0 +1,280 @@
+/*
+ * Asterisk -- An open source telephony toolkit.
+ *
+ * Copyright (C) 1999 - 2009, Digium, Inc.
+ *
+ * See http://www.asterisk.org for more information about
+ * the Asterisk project. Please do not directly contact
+ * any of the maintainers of this project for assistance;
+ * the project provides a web site, mailing lists and IRC
+ * channels for your use.
+ *
+ * This program is free software, distributed under the terms of
+ * the GNU General Public License Version 2. See the LICENSE file
+ * at the top of the source tree.
+ */
+
+/*!
+ * \file
+ */
+
+/*!
+ * \page ReleaseStatus Asterisk Release Status
+ *
+ * @AsteriskTrunkWarning
+ *
+ * \section warranty Warranty
+ * The following warranty applies to all open source releases of Asterisk:
+ *
+ * NO WARRANTY
+ *
+ * BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+ * FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+ * OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+ * PROVIDE THE PROGRAM \"AS IS\" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+ * OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+ * TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+ * PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+ * REPAIR OR CORRECTION.
+
+ * IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+ * WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+ * REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+ * INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+ * OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+ * TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+ * YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+ * PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ * \section releasestatustypes Release Status Types
+ *
+ * Release management is a essentially an agreement between the development
+ * community and the %user community on what kind of updates can be expected
+ * for Asterisk releases, and what types of changes these updates will contain.
+ * Once these policies are established, the development community works very
+ * hard to adhere to them. However, the development community does reserve
+ * the right to make exceptions to these rules for special cases as the need
+ * arises.
+ *
+ * Asterisk releases are in various states of maintenance. The states are
+ * defined here:
+ *
+ * \arg <b>None</b> - This release series is receiving no updates whatsoever.
+ * \arg <b>Security-Only</b> - This release series is receiving updates, but
+ * only to address security issues. Security issues found and fixed in
+ * this release series will be accompanied by a published security advisory
+ * from the Asterisk project.
+ * \arg <b>Full-Support</b> - This release series is receiving updates for all
+ * types of bugs.
+ * \arg <b>Full-Development</b> - Changes in this part of Asterisk include bug
+ * fixes, as well as new %features and architectural improvements.
+ *
+ * \section AsteriskReleases Asterisk Maintenance Levels
+ *
+ * \htmlonly
+ * <table border="1">
+ * <tr>
+ * <td><b>Name</b></td>
+ * <td><b>SVN Branch</b></td>
+ * <td><b>Status</b></td>
+ * <td><b>Notes</b></td>
+ * </tr>
+ * <tr>
+ * <td>Asterisk 1.0</td>
+ * <td>/branches/1.0</td>
+ * <td>None</td>
+ * </tr>
+ * <tr>
+ * <td>Asterisk 1.2</td>
+ * <td>/branches/1.2</td>
+ * <td>Security-Only</td>
+ * </tr>
+ * <tr>
+ * <td>Asterisk 1.4</td>
+ * <td>/branches/1.4</td>
+ * <td>Full-Support</td>
+ * </tr>
+ * <tr>
+ * <td>Asterisk 1.6.0</td>
+ * <td>/branches/1.6.0</td>
+ * <td>Full-Support</td>
+ * </tr>
+ * <tr>
+ * <td>Asterisk 1.6.1</td>
+ * <td>/branches/1.6.1</td>
+ * <td>Full-Support</td>
+ * <td>Still in beta</td>
+ * </tr>
+ * <tr>
+ * <td>Asterisk trunk</td>
+ * <td>/trunk</td>
+ * <td>Full-Development</td>
+ * <td>No releases are made directly from trunk.</td>
+ * </tr>
+ * </table>
+ * \endhtmlonly
+ *
+ * For more information on how and when Asterisk releases are made, see the
+ * release policies page:
+ * \arg \ref ReleasePolicies
+ */
+
+/*!
+ * \page ReleasePolicies Asterisk Release and Commit Policies
+ *
+ * \AsteriskTrunkWarning
+ *
+ * \section releasestatus Asterisk Release Status
+ *
+ * For more information on the current status of each Asterisk release series,
+ * please see the Asterisk Release Status page:
+ *
+ * \arg \ref ReleaseStatus
+ *
+ * <hr/>
+ *
+ * \section commitmonitoring Commit Monitoring
+ *
+ * To monitor commits to Asterisk and related projects, visit
+ * <a href="http://lists.digium.com/">http://lists.digium.com</a>. The Digium
+ * mailing list server hosts a %number of mailing lists for commits.
+ *
+ * <hr/>
+ *
+ * \section ast10policy Asterisk 1.0
+ *
+ * \subsection svnbranch SVN Branch
+ *
+ * \arg /branches/1.0
+ *
+ * \subsection ast10releases Release and Commit Policy
+ * No more releases of Asterisk 1.0 will be made for any reason.
+ *
+ * No commits should be made to the Asterisk 1.0 branch.
+ *
+ * <hr/>
+ *
+ * \section ast12policy Asterisk 1.2
+ *
+ * \subsection svnbranch SVN Branch
+ *
+ * \arg /branches/1.2
+ *
+ * \subsection ast12releases Release and Commit Policy
+ *
+ * There will be no more scheduled releases of Asterisk 1.2.
+ *
+ * Commits to the Asterisk 1.2 branch should only address security issues or
+ * regressions introduced by previous security fixes. For a security issue, the
+ * commit should be accompanied by an
+ * <a href="http://downloads.digium.com/pub/security/">Asterisk Security Advisory</a>
+ * and an immediate release. When a commit goes in to fix a regression, the previous
+ * security advisory that is related to the change that introduced the bug should get
+ * updated to indicate that there is an updated version of the fix. A release should
+ * be made immediately for these regression fixes, as well.
+ *
+ * <hr/>
+ *
+ * \section ast14policy Asterisk 1.4
+ *
+ * \subsection svnbranch SVN Branch
+ *
+ * \arg /branches/1.4
+ *
+ * \subsection ast14releases Release and Commit Policy
+ *
+ * Asterisk 1.4 is receiving regular bug fix release updates. An attempt is made to
+ * make releases of every four to six weeks. Since this release series is receiving
+ * changes for all types of bugs, the number of changes in a single release can be
+ * significant. 1.4.X releases go through a release candidate testing cycle to help
+ * catch any regressions that may have been introduced.
+ *
+ * Commits to Asterisk 1.4 must be to address bugs only. No new %features should be
+ * introduced into Asterisk 1.4 to reduce the %number of changes to this established
+ * release series. The only exceptions to this %rule are for cases where something
+ * that may be considered a feature is needed to address a bug or security issue.
+ *
+ * <hr/>
+ *
+ * \section ast16policy Asterisk 1.6
+ *
+ * \subsection svnbranch SVN Branch
+ *
+ * \arg /branches/1.6.*
+ *
+ * \subsection ast16releases Release and Commit Policy
+ *
+ * Asterisk 1.6 is managed in a different way than previous Asterisk release series.
+ * From a high level, it was inspired by the release model used for Linux 2.6.
+ * The intended time frame for 1.6.X releases is every 2 or 3 months. Each 1.6.X
+ * release gets its own branch. The 1.6.X branches are branches off of trunk.
+ * Once the branch is created, it only receives bug fixes. Each 1.6.X release goes
+ * through a beta and release candidate testing cycle.
+ *
+ * After a 1.6.X release is published, it will be maintained until 1.6.[X + 3] is
+ * released. While a 1.6.X release branch is still maintained, it will receive only
+ * bug fixes. Periodic maintenance releases will be made and labeled as 1.6.X.Y.
+ * 1.6.X.Y releases should go through a release candidate test cycle before being
+ * published.
+ *
+ * For now, all previous 1.6 release will be maintained for security issues. Once
+ * we have more 1.6 releases to deal with, this part of the policy will likely change.
+ *
+ * For some history on the motivations for Asterisk 1.6 release management, see the
+ * first two sections of this
+ * <a href="http://lists.digium.com/pipermail/asterisk-dev/2007-October/030083.html">mailing list post</a>.
+ *
+ * <hr/>
+ *
+ * \section asttrunk Asterisk Trunk
+ *
+ * \subsection svnbranch SVN Branch
+ *
+ * \arg /trunk
+ *
+ * \subsection asttrunkpolicy Release and Commit Policy
+ *
+ * No releases are ever made directly from Asterisk trunk.
+ *
+ * Asterisk trunk is used as the main development area for upcoming Asterisk 1.6
+ * releases. Commits to Asterisk trunk are not limited. They can be bug fixes,
+ * new %features, and architectural improvements. However, for larger sets
+ * of changes, developers should work with the Asterisk project leaders to
+ * schedule them for inclusion. Care is taken not to include too many invasive
+ * sets of changes for each new Asterisk 1.6 release.
+ *
+ * No changes should go into Asterisk trunk that are not ready to go into a
+ * release. While the upcoming release will go through a beta and release
+ * candidate test cycle, code should not be in trunk until the code has been
+ * tested and reviewed such that there is reasonable belief that the code
+ * is ready to go.
+ *
+ * <hr/>
+ *
+ * \section astteam Asterisk Team Branches
+ *
+ * \subsection svnbranch SVN Branch
+ *
+ * \arg /team/<developername>
+ *
+ * \subsection astteampolicy Release and Commit Policy
+ *
+ * The Asterisk subversion repository has a special directory called "team"
+ * where developers can make their own personal development branches. This is
+ * where new %features, bug fixes, and architectural improvements are developed
+ * while they are in %progress.
+ *
+ * Just about anything goes as far as commits to this area goes. However,
+ * developers should keep in mind that anything committed here, as well as
+ * anywhere else on Digium's SVN server, falls under the contributor license
+ * agreement.
+ *
+ * In addition to each developer having their own space for working on projects,
+ * there is also a team/group folder where %group development efforts take place.
+ *
+ * Finally, in each developer folder, there is a folder called "private". This
+ * is where developers can create branches for working on things that they are
+ * not ready for the whole world to see.
+ */
Propchange: trunk/include/asterisk/doxygen/releases.h
------------------------------------------------------------------------------
svn:eol-style = native
Propchange: trunk/include/asterisk/doxygen/releases.h
------------------------------------------------------------------------------
svn:keywords = Author Date Id Revision
Propchange: trunk/include/asterisk/doxygen/releases.h
------------------------------------------------------------------------------
svn:mime-type = text/plain
Modified: trunk/include/asterisk/doxyref.h
URL: http://svn.digium.com/svn-view/asterisk/trunk/include/asterisk/doxyref.h?view=diff&rev=186953&r1=186952&r2=186953
==============================================================================
--- trunk/include/asterisk/doxyref.h (original)
+++ trunk/include/asterisk/doxyref.h Wed Apr 8 08:24:48 2009
@@ -1,7 +1,7 @@
/*
* Asterisk -- An open source telephony toolkit.
*
- * Copyright (C) 1999 - 2008, Digium, Inc.
+ * Copyright (C) 1999 - 2009, Digium, Inc.
*
* See http://www.asterisk.org for more information about
* the Asterisk project. Please do not directly contact
@@ -15,9 +15,11 @@
*/
/*!
- * \file
- * \brief This file generates Doxygen pages from files in the /doc
- * directory of the Asterisk source code tree
+ * \file
+ *
+ * This is the main header file used for generating miscellaneous developer
+ * documentation using doxygen. This also pulls in all of the documentation
+ * that is in include/asterisk/doxygen/.
*/
/*
@@ -68,267 +70,6 @@
* \arg \b Digium: The Asterisk Company http://www.digium.com
*/
-/*!
- * \page ReleaseStatus Asterisk Release Status
- *
- * @AsteriskTrunkWarning
- *
- * \section warranty Warranty
- * The following warranty applies to all open source releases of Asterisk:
- *
- * NO WARRANTY
- *
- * BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
- * FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
- * OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
- * PROVIDE THE PROGRAM \"AS IS\" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
- * OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
- * TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
- * PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
- * REPAIR OR CORRECTION.
-
- * IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
- * WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
- * REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
- * INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
- * OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
- * TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
- * YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
- * PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- *
- * \section releasestatustypes Release Status Types
- *
- * Release management is a essentially an agreement between the development
- * community and the %user community on what kind of updates can be expected
- * for Asterisk releases, and what types of changes these updates will contain.
- * Once these policies are established, the development community works very
- * hard to adhere to them. However, the development community does reserve
- * the right to make exceptions to these rules for special cases as the need
- * arises.
- *
- * Asterisk releases are in various states of maintenance. The states are
- * defined here:
- *
- * \arg <b>None</b> - This release series is receiving no updates whatsoever.
- * \arg <b>Security-Only</b> - This release series is receiving updates, but
- * only to address security issues. Security issues found and fixed in
- * this release series will be accompanied by a published security advisory
- * from the Asterisk project.
- * \arg <b>Full-Support</b> - This release series is receiving updates for all
- * types of bugs.
- * \arg <b>Full-Development</b> - Changes in this part of Asterisk include bug
- * fixes, as well as new %features and architectural improvements.
- *
- * \section AsteriskReleases Asterisk Maintenance Levels
- *
- * \htmlonly
- * <table border="1">
- * <tr>
- * <td><b>Name</b></td>
- * <td><b>SVN Branch</b></td>
- * <td><b>Status</b></td>
- * <td><b>Notes</b></td>
- * </tr>
- * <tr>
- * <td>Asterisk 1.0</td>
- * <td>/branches/1.0</td>
- * <td>None</td>
- * </tr>
- * <tr>
- * <td>Asterisk 1.2</td>
- * <td>/branches/1.2</td>
- * <td>Security-Only</td>
- * </tr>
- * <tr>
- * <td>Asterisk 1.4</td>
- * <td>/branches/1.4</td>
- * <td>Full-Support</td>
- * </tr>
- * <tr>
- * <td>Asterisk 1.6.0</td>
- * <td>/branches/1.6.0</td>
- * <td>Full-Support</td>
- * </tr>
- * <tr>
- * <td>Asterisk 1.6.1</td>
- * <td>/branches/1.6.1</td>
- * <td>Full-Support</td>
- * <td>Still in beta</td>
- * </tr>
- * <tr>
- * <td>Asterisk trunk</td>
- * <td>/trunk</td>
- * <td>Full-Development</td>
- * <td>No releases are made directly from trunk.</td>
- * </tr>
- * </table>
- * \endhtmlonly
- *
- * For more information on how and when Asterisk releases are made, see the
- * release policies page:
- * \arg \ref ReleasePolicies
- */
-
-/*!
- * \page ReleasePolicies Asterisk Release and Commit Policies
- *
- * \AsteriskTrunkWarning
- *
- * \section releasestatus Asterisk Release Status
- *
- * For more information on the current status of each Asterisk release series,
- * please see the Asterisk Release Status page:
- *
- * \arg \ref ReleaseStatus
- *
- * <hr/>
- *
- * \section commitmonitoring Commit Monitoring
- *
- * To monitor commits to Asterisk and related projects, visit
- * <a href="http://lists.digium.com/">http://lists.digium.com</a>. The Digium
- * mailing list server hosts a %number of mailing lists for commits.
- *
- * <hr/>
- *
- * \section ast10policy Asterisk 1.0
- *
- * \subsection svnbranch SVN Branch
- *
- * \arg /branches/1.0
- *
- * \subsection ast10releases Release and Commit Policy
- * No more releases of Asterisk 1.0 will be made for any reason.
- *
- * No commits should be made to the Asterisk 1.0 branch.
- *
- * <hr/>
- *
- * \section ast12policy Asterisk 1.2
- *
- * \subsection svnbranch SVN Branch
- *
- * \arg /branches/1.2
- *
- * \subsection ast12releases Release and Commit Policy
- *
- * There will be no more scheduled releases of Asterisk 1.2.
- *
- * Commits to the Asterisk 1.2 branch should only address security issues or
- * regressions introduced by previous security fixes. For a security issue, the
- * commit should be accompanied by an
- * <a href="http://downloads.digium.com/pub/security/">Asterisk Security Advisory</a>
- * and an immediate release. When a commit goes in to fix a regression, the previous
- * security advisory that is related to the change that introduced the bug should get
- * updated to indicate that there is an updated version of the fix. A release should
- * be made immediately for these regression fixes, as well.
- *
- * <hr/>
- *
- * \section ast14policy Asterisk 1.4
- *
- * \subsection svnbranch SVN Branch
- *
- * \arg /branches/1.4
- *
- * \subsection ast14releases Release and Commit Policy
- *
- * Asterisk 1.4 is receiving regular bug fix release updates. An attempt is made to
- * make releases of every four to six weeks. Since this release series is receiving
- * changes for all types of bugs, the number of changes in a single release can be
- * significant. 1.4.X releases go through a release candidate testing cycle to help
- * catch any regressions that may have been introduced.
- *
- * Commits to Asterisk 1.4 must be to address bugs only. No new %features should be
- * introduced into Asterisk 1.4 to reduce the %number of changes to this established
- * release series. The only exceptions to this %rule are for cases where something
- * that may be considered a feature is needed to address a bug or security issue.
- *
- * <hr/>
- *
- * \section ast16policy Asterisk 1.6
- *
- * \subsection svnbranch SVN Branch
- *
- * \arg /branches/1.6.*
- *
- * \subsection ast16releases Release and Commit Policy
- *
- * Asterisk 1.6 is managed in a different way than previous Asterisk release series.
- * From a high level, it was inspired by the release model used for Linux 2.6.
- * The intended time frame for 1.6.X releases is every 2 or 3 months. Each 1.6.X
- * release gets its own branch. The 1.6.X branches are branches off of trunk.
- * Once the branch is created, it only receives bug fixes. Each 1.6.X release goes
- * through a beta and release candidate testing cycle.
- *
- * After a 1.6.X release is published, it will be maintained until 1.6.[X + 3] is
- * released. While a 1.6.X release branch is still maintained, it will receive only
- * bug fixes. Periodic maintenance releases will be made and labeled as 1.6.X.Y.
- * 1.6.X.Y releases should go through a release candidate test cycle before being
- * published.
- *
- * For now, all previous 1.6 release will be maintained for security issues. Once
- * we have more 1.6 releases to deal with, this part of the policy will likely change.
- *
- * For some history on the motivations for Asterisk 1.6 release management, see the
- * first two sections of this
- * <a href="http://lists.digium.com/pipermail/asterisk-dev/2007-October/030083.html">mailing list post</a>.
- *
- * <hr/>
- *
- * \section asttrunk Asterisk Trunk
- *
- * \subsection svnbranch SVN Branch
- *
- * \arg /trunk
- *
- * \subsection asttrunkpolicy Release and Commit Policy
- *
- * No releases are ever made directly from Asterisk trunk.
- *
- * Asterisk trunk is used as the main development area for upcoming Asterisk 1.6
- * releases. Commits to Asterisk trunk are not limited. They can be bug fixes,
- * new %features, and architectural improvements. However, for larger sets
- * of changes, developers should work with the Asterisk project leaders to
- * schedule them for inclusion. Care is taken not to include too many invasive
- * sets of changes for each new Asterisk 1.6 release.
- *
- * No changes should go into Asterisk trunk that are not ready to go into a
- * release. While the upcoming release will go through a beta and release
- * candidate test cycle, code should not be in trunk until the code has been
- * tested and reviewed such that there is reasonable belief that the code
- * is ready to go.
- *
- * <hr/>
- *
- * \section astteam Asterisk Team Branches
- *
- * \subsection svnbranch SVN Branch
- *
- * \arg /team/<developername>
- *
- * \subsection astteampolicy Release and Commit Policy
- *
- * The Asterisk subversion repository has a special directory called "team"
- * where developers can make their own personal development branches. This is
- * where new %features, bug fixes, and architectural improvements are developed
- * while they are in %progress.
- *
- * Just about anything goes as far as commits to this area goes. However,
- * developers should keep in mind that anything committed here, as well as
- * anywhere else on Digium's SVN server, falls under the contributor license
- * agreement.
- *
- * In addition to each developer having their own space for working on projects,
- * there is also a team/group folder where %group development efforts take place.
- *
- * Finally, in each developer folder, there is a folder called "private". This
- * is where developers can create branches for working on things that they are
- * not ready for the whole world to see.
- */
-
/*!
* \page CodeGuide Coding Guidelines
* \AsteriskTrunkWarning
@@ -336,99 +77,6 @@
* This file is in the /doc directory in your Asterisk source tree.
* Make sure to stay up to date with the latest guidelines.
* \verbinclude CODING-GUIDELINES
- */
-
-/*!
- * \page CommitMessages Guidelines for Commit Messages
- *
- * \AsteriskTrunkWarning
- *
- * <hr/>
- *
- * \section CommitMsgFormatting Commit Message Formatting
- *
- * The following illustrates the basic outline for commit messages:
- *
- \verbatim
- <One-liner summary of changes>
-
- <Verbose description of the changes>
-
- <Special Tags>
- \endverbatim
- *
- * Some commit history viewers treat the first line of commit messages as the
- * summary for the commit. So, an effort should be made to format our commit
- * messages in that fashion. The verbose description may contain multiple
- * paragraphs, itemized lists, etc. Always end the first sentence (and any
- * subsequent sentences) with punctuation.
- *
- * Commit messages should be wrapped at 80 %columns.
- *
- * \note For trivial commits, such as "fix the build", or "fix spelling mistake",
- * the verbose description may not be necessary.
- *
- * <hr/>
- *
- * \section CommitMsgTags Special Tags for Commit Messages
- *
- * \subsection MantisTags Mantis (http://bugs.digium.com/)
- *
- * To have a commit noted in an issue, use a tag of the form:
- * \arg (issue #1234)
- *
- * To have a commit automatically close an issue, use a tag of the form:
- * \arg (closes issue #1234)
- *
- * When making a commit for a mantis issue, it is easiest to use the
- * provided commit %message template functionality. It will format the
- * special tags appropriately, and will also include information about who
- * reported the issue, which patches are being applied, and who did testing.
- *
- * Assuming that you have bug marshal access (and if you have commit access,
- * it is pretty safe to assume that you do), you will find the commit %message
- * template section directly below the issue details section and above the
- * issue relationships section. You will have to click the '+' next to
- * "Commit message template" to make the contents of the section visible.
- *
- * Here is an example of what the template will generate for you:
- *
- \verbatim
- (closes issue #1234)
- Reported by: SomeGuy
- Patches:
- fix_bug_1234.diff uploaded by SomeDeveloper (license 5678)
- \endverbatim
- *
- * If the patch being committed was written by the person doing the commit,
- * and is not available to reference as an upload to the issue, there is no
- * need to include something like "fixed by me", as that will be the default
- * assumption when a specific patch is not referenced.
- *
- * \subsection ReviewBoardTags Review Board (http://reviewboard.digium.com/)
- *
- * To have a commit set a review request as submitted, include the full URL
- * to the review request. For example:
- * \arg Review: %http://reviewboard.digium.com/r/95/
- *
- * \note The trailing slash in the review URL is required.
- *
- * <hr/>
- *
- * \section CommitMsgSvnmerge Commit Messages with svnmerge
- *
- * When using the svnmerge tool for merging changes between branches, use the
- * commit %message generated by svnmerge. The '-f' option to svnmerge allows
- * you to specify a file for svnmerge to write out a commit %message to. The
- * '-F' option to svn commit allows you to specify a file that contains the
- * commit %message.
- *
- * If you are using the expect script wrappers for svnmerge from repotools,
- * a commit %message is automatically placed in the file '../merge.msg'.
- *
- * For more detailed information about working with branches and merging,
- * see the following page on %asterisk.org:
- * \arg http://www.asterisk.org/developers/svn-branching-merging
*/
/*!
@@ -1019,136 +667,4 @@
* http://www.sqlite.org
*/
-/*!
- * \page Licensing Asterisk Licensing Information
- *
- * \section license Asterisk License
- * \verbinclude LICENSE
- *
- * \section otherlicenses Licensing of 3rd Party Code
- *
- * This section contains a (not yet complete) list of libraries that are used
- * by various parts of Asterisk, including related licensing information.
[... 140 lines stripped ...]
More information about the asterisk-commits
mailing list