[asterisk-commits] tilghman: branch 1.4 r130514 - /branches/1.4/channels/chan_iax2.c
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Sun Jul 13 12:56:10 CDT 2008
Author: tilghman
Date: Sun Jul 13 12:56:10 2008
New Revision: 130514
URL: http://svn.digium.com/view/asterisk?view=rev&rev=130514
Log:
Reverting 2 changesets, as it breaks incoming IAX2 calls
(Related to issue #12963)
Reported by: mvanbaak
Modified:
branches/1.4/channels/chan_iax2.c
Modified: branches/1.4/channels/chan_iax2.c
URL: http://svn.digium.com/view/asterisk/branches/1.4/channels/chan_iax2.c?view=diff&rev=130514&r1=130513&r2=130514
==============================================================================
--- branches/1.4/channels/chan_iax2.c (original)
+++ branches/1.4/channels/chan_iax2.c Sun Jul 13 12:56:10 2008
@@ -1438,13 +1438,13 @@
#define NEW_ALLOW 1
#define NEW_FORCE 2
-static int match(struct sockaddr_in *sin, unsigned short callno, unsigned short dcallno, struct chan_iax2_pvt *cur)
+static int match(struct sockaddr_in *sin, unsigned short callno, unsigned short dcallno, struct chan_iax2_pvt *cur, int check_dcallno)
{
if ((cur->addr.sin_addr.s_addr == sin->sin_addr.s_addr) &&
(cur->addr.sin_port == sin->sin_port)) {
/* This is the main host */
if ( (cur->peercallno == 0 || cur->peercallno == callno) &&
- (dcallno == 0 || cur->callno == dcallno) ) {
+ (check_dcallno ? dcallno == cur->callno : 1) ) {
/* That's us. Be sure we keep track of the peer call number */
return 1;
}
@@ -1525,7 +1525,7 @@
/*!
* \note Calling this function while holding another pvt lock can cause a deadlock.
*/
-static int __find_callno(unsigned short callno, unsigned short dcallno, struct sockaddr_in *sin, int new, int sockfd, int return_locked)
+static int __find_callno(unsigned short callno, unsigned short dcallno, struct sockaddr_in *sin, int new, int sockfd, int return_locked, int check_dcallno)
{
int res = 0;
int x;
@@ -1538,6 +1538,8 @@
struct chan_iax2_pvt tmp_pvt = {
.callno = dcallno,
.peercallno = callno,
+ /* hack!! */
+ .frames_received = check_dcallno,
};
memcpy(&tmp_pvt.addr, sin, sizeof(tmp_pvt.addr));
@@ -1555,7 +1557,7 @@
/* This will occur on the first response to a message that we initiated,
* such as a PING. */
- if (callno && dcallno && iaxs[dcallno] && !iaxs[dcallno]->peercallno && match(sin, callno, dcallno, iaxs[dcallno])) {
+ if (callno && dcallno && iaxs[dcallno] && !iaxs[dcallno]->peercallno && match(sin, callno, dcallno, iaxs[dcallno], check_dcallno)) {
iaxs[dcallno]->peercallno = callno;
res = dcallno;
store_by_peercallno(iaxs[dcallno]);
@@ -1578,7 +1580,7 @@
ast_mutex_lock(&iaxsl[x]);
if (iaxs[x]) {
/* Look for an exact match */
- if (match(sin, callno, dcallno, iaxs[x])) {
+ if (match(sin, callno, dcallno, iaxs[x], check_dcallno)) {
res = x;
}
}
@@ -1590,7 +1592,7 @@
ast_mutex_lock(&iaxsl[x]);
if (iaxs[x]) {
/* Look for an exact match */
- if (match(sin, callno, dcallno, iaxs[x])) {
+ if (match(sin, callno, dcallno, iaxs[x], check_dcallno)) {
res = x;
}
}
@@ -1677,14 +1679,14 @@
return res;
}
-static int find_callno(unsigned short callno, unsigned short dcallno, struct sockaddr_in *sin, int new, int sockfd) {
-
- return __find_callno(callno, dcallno, sin, new, sockfd, 0);
-}
-
-static int find_callno_locked(unsigned short callno, unsigned short dcallno, struct sockaddr_in *sin, int new, int sockfd) {
-
- return __find_callno(callno, dcallno, sin, new, sockfd, 1);
+static int find_callno(unsigned short callno, unsigned short dcallno, struct sockaddr_in *sin, int new, int sockfd, int full_frame) {
+
+ return __find_callno(callno, dcallno, sin, new, sockfd, 0, full_frame);
+}
+
+static int find_callno_locked(unsigned short callno, unsigned short dcallno, struct sockaddr_in *sin, int new, int sockfd, int full_frame) {
+
+ return __find_callno(callno, dcallno, sin, new, sockfd, 1, full_frame);
}
/*!
@@ -7042,7 +7044,7 @@
}
/* This is a video frame, get call number */
- fr->callno = find_callno(ntohs(vh->callno) & ~0x8000, dcallno, &sin, new, fd);
+ fr->callno = find_callno(ntohs(vh->callno) & ~0x8000, dcallno, &sin, new, fd, 0);
minivid = 1;
} else if ((meta->zeros == 0) && !(ntohs(meta->metacmd) & 0x8000)) {
unsigned char metatype;
@@ -7100,7 +7102,7 @@
/* Stop if we don't have enough data */
if (len > res)
break;
- fr->callno = find_callno_locked(callno & ~IAX_FLAG_FULL, 0, &sin, NEW_PREVENT, fd);
+ fr->callno = find_callno_locked(callno & ~IAX_FLAG_FULL, 0, &sin, NEW_PREVENT, fd, 0);
if (fr->callno) {
/* If it's a valid call, deliver the contents. If not, we
drop it, since we don't have a scallno to use for an INVAL */
@@ -7166,46 +7168,14 @@
return 1;
}
+ /* Get the destination call number */
+ dcallno = ntohs(fh->dcallno) & ~IAX_FLAG_RETRANS;
/* Retrieve the type and subclass */
f.frametype = fh->type;
if (f.frametype == AST_FRAME_VIDEO) {
f.subclass = uncompress_subclass(fh->csub & ~0x40) | ((fh->csub >> 6) & 0x1);
} else {
f.subclass = uncompress_subclass(fh->csub);
- }
-
- /*
- * We enforce accurate destination call numbers for all full frames except
- * NEW, LAGRQ, and PING commands. For these, we leave dcallno set to 0 to
- * avoid having find_callno() use it when matching against existing calls.
- *
- * For NEW commands, the destination call is always ignored. See section
- * 6.2.2 of the iax2 RFC.
- *
- * For LAGRQ and PING commands, this is because older versions of Asterisk
- * schedule these commands to get sent very quickly, and they will sometimes
- * be sent before they receive the first frame from the other side. When
- * that happens, it doesn't contain the destination call number. However,
- * not checking it for these frames is safe.
- *
- * Discussed in the following thread:
- * http://lists.digium.com/pipermail/asterisk-dev/2008-May/033217.html
- */
-
- /* Get the destination call number */
- dcallno = ntohs(fh->dcallno) & ~IAX_FLAG_RETRANS;
-
- if (f.frametype == AST_FRAME_IAX &&
- (f.subclass == IAX_COMMAND_NEW ||
- f.subclass == IAX_COMMAND_PING ||
- f.subclass == IAX_COMMAND_LAGRQ)) {
- dcallno = 0;
- } else if (!dcallno) {
- /* All other full-frames must have a non-zero dcallno,
- * We silently drop this frame since it cannot be a
- * valid match to an existing call session.
- */
- return 1;
}
if ((f.frametype == AST_FRAME_IAX) && ((f.subclass == IAX_COMMAND_NEW) || (f.subclass == IAX_COMMAND_REGREQ) ||
(f.subclass == IAX_COMMAND_POKE) || (f.subclass == IAX_COMMAND_FWDOWNL) ||
@@ -7218,7 +7188,25 @@
}
if (!fr->callno) {
- fr->callno = find_callno(ntohs(mh->callno) & ~IAX_FLAG_FULL, dcallno, &sin, new, fd);
+ int check_dcallno = 0;
+
+ /*
+ * We enforce accurate destination call numbers for all full frames except
+ * LAGRQ and PING commands. This is because older versions of Asterisk
+ * schedule these commands to get sent very quickly, and they will sometimes
+ * be sent before they receive the first frame from the other side. When
+ * that happens, it doesn't contain the destination call number. However,
+ * not checking it for these frames is safe.
+ *
+ * Discussed in the following thread:
+ * http://lists.digium.com/pipermail/asterisk-dev/2008-May/033217.html
+ */
+
+ if (ntohs(mh->callno) & IAX_FLAG_FULL) {
+ check_dcallno = f.frametype == AST_FRAME_IAX ? (f.subclass != IAX_COMMAND_PING && f.subclass != IAX_COMMAND_LAGRQ) : 1;
+ }
+
+ fr->callno = find_callno(ntohs(mh->callno) & ~IAX_FLAG_FULL, dcallno, &sin, new, fd, check_dcallno);
}
if (fr->callno > 0)
@@ -7305,7 +7293,6 @@
if (
((f.subclass != IAX_COMMAND_ACK) &&
(f.subclass != IAX_COMMAND_INVAL) &&
- (f.subclass != IAX_COMMAND_NEW) && /* for duplicate/retrans NEW frames */
(f.subclass != IAX_COMMAND_TXCNT) &&
(f.subclass != IAX_COMMAND_TXREADY) && /* for attended transfer */
(f.subclass != IAX_COMMAND_TXREL) && /* for attended transfer */
@@ -8722,7 +8709,7 @@
if (!reg->callno) {
if (option_debug)
ast_log(LOG_DEBUG, "Allocate call number\n");
- reg->callno = find_callno_locked(0, 0, ®->addr, NEW_FORCE, defaultsockfd);
+ reg->callno = find_callno_locked(0, 0, ®->addr, NEW_FORCE, defaultsockfd, 0);
if (reg->callno < 1) {
ast_log(LOG_WARNING, "Unable to create call for registration\n");
return -1;
@@ -8783,7 +8770,7 @@
memset(&ied, 0, sizeof(ied));
iax_ie_append_raw(&ied, IAX_IE_PROVISIONING, provdata.buf, provdata.pos);
- callno = find_callno_locked(0, 0, &sin, NEW_FORCE, cai.sockfd);
+ callno = find_callno_locked(0, 0, &sin, NEW_FORCE, cai.sockfd, 0);
if (!callno)
return -1;
@@ -8929,7 +8916,7 @@
}
if (heldcall)
ast_mutex_unlock(&iaxsl[heldcall]);
- callno = peer->callno = find_callno(0, 0, &peer->addr, NEW_FORCE, peer->sockfd);
+ callno = peer->callno = find_callno(0, 0, &peer->addr, NEW_FORCE, peer->sockfd, 0);
if (heldcall)
ast_mutex_lock(&iaxsl[heldcall]);
if (peer->callno < 1) {
@@ -9013,7 +9000,7 @@
if (pds.port)
sin.sin_port = htons(atoi(pds.port));
- callno = find_callno_locked(0, 0, &sin, NEW_FORCE, cai.sockfd);
+ callno = find_callno_locked(0, 0, &sin, NEW_FORCE, cai.sockfd, 0);
if (callno < 1) {
ast_log(LOG_WARNING, "Unable to create call\n");
*cause = AST_CAUSE_CONGESTION;
@@ -10333,7 +10320,7 @@
ast_log(LOG_DEBUG, "peer: %s, username: %s, password: %s, context: %s\n",
pds.peer, pds.username, pds.password, pds.context);
- callno = find_callno_locked(0, 0, &sin, NEW_FORCE, cai.sockfd);
+ callno = find_callno_locked(0, 0, &sin, NEW_FORCE, cai.sockfd, 0);
if (callno < 1) {
ast_log(LOG_WARNING, "Unable to create call\n");
return -1;
@@ -11109,7 +11096,11 @@
{
struct chan_iax2_pvt *pvt = obj, *pvt2 = arg;
- return match(&pvt2->addr, pvt2->peercallno, pvt2->callno, pvt) ? CMP_MATCH : 0;
+ /* The frames_received field is used to hold whether we're matching
+ * against a full frame or not ... */
+
+ return match(&pvt2->addr, pvt2->peercallno, pvt2->callno, pvt,
+ pvt2->frames_received) ? CMP_MATCH : 0;
}
/*! \brief Load IAX2 module, load configuraiton ---*/
More information about the asterisk-commits
mailing list