[asterisk-commits] kpfleming: trunk r130044 - in /trunk: ./ contrib/utils/ doc/
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Fri Jul 11 11:18:01 CDT 2008
Author: kpfleming
Date: Fri Jul 11 11:18:01 2008
New Revision: 130044
URL: http://svn.digium.com/view/asterisk?view=rev&rev=130044
Log:
clean up a bunch more Zaptel-related references
Modified:
trunk/CHANGES
trunk/contrib/utils/zones2indications.c
trunk/doc/ss7.txt
Modified: trunk/CHANGES
URL: http://svn.digium.com/view/asterisk/trunk/CHANGES?view=diff&rev=130044&r1=130043&r2=130044
==============================================================================
--- trunk/CHANGES (original)
+++ trunk/CHANGES Fri Jul 11 11:18:01 2008
@@ -35,9 +35,9 @@
* CHANNEL() now has options for the maximum, minimum, and standard or normal
deviation of jitter, rtt, and loss for a call using chan_sip.
-Zaptel channel driver (chan_zap) Changes
+DAHDI channel driver (chan_dahdi) Changes
----------------------------------------
- * Channels can now be configured using named sections in zapata.conf, just
+ * Channels can now be configured using named sections in chan_dahdi.conf, just
like other channel drivers, including the use of templates.
* The default for pridialplan has changed from 'national' to 'unknown'.
@@ -389,28 +389,28 @@
default to their old hard-coded values ('#' and '*' respectively) so this should
not break any existing agent installations.
-Zaptel channel driver (chan_zap) Changes
+DAHDI channel driver (chan_dahdi) Changes
----------------------------------------
- * SS7 support in chan_zap (via libss7 library)
+ * SS7 support (via libss7 library)
* In India, some carriers transmit CID via dtmf. Some code has been added
that will handle some situations. The cidstart=polarity_IN choice has been added for
those carriers that transmit CID via dtmf after a polarity change.
* CID matching information is now shown when doing 'dialplan show'.
- * Added zap show version CLI command to chan_zap.
- * Added setvar support to zapata.conf channel entries.
+ * Added dahdi show version CLI command.
+ * Added setvar support to chan_dahdi.conf channel entries.
* Added two new options: mwimonitor and mwimonitornotify. These options allow
you to enable MWI monitoring on FXO lines. When the MWI state changes,
the script specified in the mwimonitornotify option is executed. An internal
event indicating the new state of the mailbox is also generated, so that
the normal MWI facilities in Asterisk work as usual.
* Added signalling type 'auto', which attempts to use the same signalling type
- for a channel as configured in Zaptel. This is primarily designed for analog
+ for a channel as configured in DAHDI. This is primarily designed for analog
ports, but will also work for digital ports that are configured for FXS or FXO
- signalling types. This mode is also the default now, so if your zapata.conf
+ signalling types. This mode is also the default now, so if your chan_dahdi.conf
does not specify signalling for a channel (which is unlikely as the sample
configuration file has always recommended specifying it for every channel) then
the 'auto' mode will be used for that channel if possible.
- * Added a 'zap set dnd' command to allow CLI control of the Do-Not-Disturb
+ * Added a 'dahdi set dnd' command to allow CLI control of the Do-Not-Disturb
state for a channel; also ensured that the DNDState Manager event is
emitted no matter how the DND state is set or cleared.
Modified: trunk/contrib/utils/zones2indications.c
URL: http://svn.digium.com/view/asterisk/trunk/contrib/utils/zones2indications.c?view=diff&rev=130044&r1=130043&r2=130044
==============================================================================
--- trunk/contrib/utils/zones2indications.c (original)
+++ trunk/contrib/utils/zones2indications.c Fri Jul 11 11:18:01 2008
@@ -22,7 +22,7 @@
#include <stdio.h>
#include <stdlib.h>
-#include <zaptel/tonezone.h>
+#include <dahdi/tonezone.h>
#include <unistd.h>
#define PROGRAM "zones2indication"
Modified: trunk/doc/ss7.txt
URL: http://svn.digium.com/view/asterisk/trunk/doc/ss7.txt?view=diff&rev=130044&r1=130043&r2=130044
==============================================================================
--- trunk/doc/ss7.txt (original)
+++ trunk/doc/ss7.txt Fri Jul 11 11:18:01 2008
@@ -18,23 +18,26 @@
To Use:
=======
-In order to use libss7, you must get at least the following versions of Zaptel and Asterisk:
-Zaptel: 1.4.x
+In order to use libss7, you must get at least the following versions of DAHDI and Asterisk:
+DAHDI: 2.0.x
libss7: trunk (currently, there *only* is a trunk release).
-Asterisk: trunk
+Asterisk: 1.6.x
You must then do a `make; make install` in each of the directories that you installed
-in the given order (Zaptel first, libss7 second, and Asterisk last).
+in the given order (DAHDI first, libss7 second, and Asterisk last).
NOTE: In order to check out the code, you must have the subversion client installed. This
is how to check them out from the public subversion server.
These are the commands you would type to install them:
-#jpeeler: REVISIT
-`svn co http://svn.digium.com/svn/zaptel/branches/1.4 zaptel-1.4`
-`cd zaptel-1.4`
+`svn co http://svn.digium.com/svn/dahdi/linux/trunk dahdi-trunk`
+`cd dahdi-trunk`
`make; make install`
+
+`svn co http://svn.digium.com/svn/dahdi/tools/trunk dahdi-tools`
+`cd dahdi-tools`
+`./configure; make; make install`
`svn co http://svn.digium.com/svn/libss7/trunk libss7-trunk`
`cd libss7-trunk`
@@ -44,7 +47,7 @@
`cd asterisk-trunk`
`./configure; make; make install;`
-This should build Zaptel, libss7, and Asterisk with SS7 support.
+This should build DAHDI, libss7, and Asterisk with SS7 support.
In the past, there was a special asterisk-ss7 branch to use which contained the SS7 code.
That code has been merged back into the trunk version of Asterisk, and the old asterisk-ss7
@@ -53,18 +56,17 @@
instead.
CONFIGURATION:
-In zaptel.conf, your signalling channel(s) should be a "dchan" and your bearers should
+In /etc/dahdi/system.conf, your signalling channel(s) should be a "dchan" and your bearers should
be set as "bchan".
-In the asterisk-ss7 branch, there is a sample zapata.conf that is installed which
-contains sample configuration for setting up an E1 link.
+The sample chan_dahdi.conf contains sample configuration for setting up an E1 link.
In brief, here is a simple ss7 linkset setup:
signalling = ss7
ss7type = itu ; or ansi if you are using an ANSI link
-linkset = 1 ; Pick a number for your linkset identifier in zapata.conf
+linkset = 1 ; Pick a number for your linkset identifier in chan_dahdi.conf
pointcode = 28 ; The decimal form of your point code. If you are using an
; ANSI linkset, you can use the xxx-xxx-xxx notation for
@@ -98,15 +100,15 @@
; Zap/16 and one at Zap/48 which both would be used to send/receive
; ISUP traffic.
-; End of zapata.conf
+; End of chan_dahdi.conf
-This is how a basic linkset is setup. For more detailed zapata.conf SS7 config information
-as well as other options available for that file, see the default zapata.conf that comes
+This is how a basic linkset is setup. For more detailed chan_dahdi.conf SS7 config information
+as well as other options available for that file, see the default chan_dahdi.conf that comes
with the samples in asterisk. If you would like, you can do a `make samples` in your
-asterisk-trunk directory and it will install a sample zapata.conf for you that contains
+asterisk-trunk directory and it will install a sample chan_dahdi.conf for you that contains
more information about SS7 setup.
-For more information, please use the Asterisk-ss7 or Asterisk-dev mailing
+For more information, please use the asterisk-ss7 or asterisk-dev mailing
lists (I monitor them regularly) or email me directly.
Matthew Fredrickson
More information about the asterisk-commits
mailing list