[asterisk-commits] russell: branch 1.6.0 r164279 - in /branches/1.6.0: ./ main/
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Mon Dec 15 10:26:10 CST 2008
Author: russell
Date: Mon Dec 15 10:26:09 2008
New Revision: 164279
URL: http://svn.digium.com/view/asterisk?view=rev&rev=164279
Log:
Merged revisions 164203 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
................
r164203 | russell | 2008-12-15 08:40:24 -0600 (Mon, 15 Dec 2008) | 39 lines
Merged revisions 164201 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164201 | russell | 2008-12-15 08:31:37 -0600 (Mon, 15 Dec 2008) | 31 lines
Handle a case where a call can be bridged to a channel that is still ringing.
The issue that was reported was about a case where a RINGING channel got
redirected to an extension to pick up a call from parking. Once the parked
call got taken out of parking, it heard silence until the other side answered.
Ideally, the caller that was parked would get a ringing indication. This patch
fixes this case so that the caller receives ringback once it comes out of
parking until the other side answers.
The fixes are:
- Make sure we remember that a channel was an outgoing channel when doing
a masquerade. This prevents an erroneous ast_answer() call on the channel,
which causes a bogus 200 OK to be sent in the case of SIP.
- Add some additional comments to explain related parts of code.
- Update the handling of the ast_channel visible_indication field. Storing
values that are not stateful is pointless. Control frames that are events
or commands should be ignored.
- When a bridge first starts, check to see if the peer channel needs to be
given ringing indication because the calling side is still ringing.
- Rework ast_indicate_data() a bit for the sake of readability.
(closes issue #13747)
Reported by: davidw
Tested by: russell
Review: http://reviewboard.digium.com/r/90/
........
................
Modified:
branches/1.6.0/ (props changed)
branches/1.6.0/main/channel.c
branches/1.6.0/main/features.c
Propchange: branches/1.6.0/
------------------------------------------------------------------------------
Binary property 'trunk-merged' - no diff available.
Modified: branches/1.6.0/main/channel.c
URL: http://svn.digium.com/view/asterisk/branches/1.6.0/main/channel.c?view=diff&rev=164279&r1=164278&r2=164279
==============================================================================
--- branches/1.6.0/main/channel.c (original)
+++ branches/1.6.0/main/channel.c Mon Dec 15 10:26:09 2008
@@ -2852,64 +2852,126 @@
return ast_indicate_data(chan, condition, NULL, 0);
}
-int ast_indicate_data(struct ast_channel *chan, int condition, const void *data, size_t datalen)
-{
+static int attribute_const is_visible_indication(enum ast_control_frame_type condition)
+{
+ /* Don't include a default case here so that we get compiler warnings
+ * when a new type is added. */
+
+ switch (condition) {
+ case AST_CONTROL_PROGRESS:
+ case AST_CONTROL_PROCEEDING:
+ case AST_CONTROL_VIDUPDATE:
+ case AST_CONTROL_SRCUPDATE:
+ case AST_CONTROL_RADIO_KEY:
+ case AST_CONTROL_RADIO_UNKEY:
+ case AST_CONTROL_OPTION:
+ case AST_CONTROL_WINK:
+ case AST_CONTROL_FLASH:
+ case AST_CONTROL_OFFHOOK:
+ case AST_CONTROL_TAKEOFFHOOK:
+ case AST_CONTROL_ANSWER:
+ case AST_CONTROL_HANGUP:
+ case AST_CONTROL_T38:
+ return 0;
+
+ case AST_CONTROL_CONGESTION:
+ case AST_CONTROL_BUSY:
+ case AST_CONTROL_RINGING:
+ case AST_CONTROL_RING:
+ case AST_CONTROL_HOLD:
+ case AST_CONTROL_UNHOLD:
+ return 1;
+ }
+
+ return 0;
+}
+
+int ast_indicate_data(struct ast_channel *chan, int _condition,
+ const void *data, size_t datalen)
+{
+ /* By using an enum, we'll get compiler warnings for values not handled
+ * in switch statements. */
+ enum ast_control_frame_type condition = _condition;
+ const struct ind_tone_zone_sound *ts = NULL;
int res = -1;
ast_channel_lock(chan);
- /* Stop if we're a zombie or need a soft hangup */
+
+ /* Don't bother if the channel is about to go away, anyway. */
if (ast_test_flag(chan, AST_FLAG_ZOMBIE) || ast_check_hangup(chan)) {
ast_channel_unlock(chan);
return -1;
}
- if (chan->tech->indicate)
+
+ if (chan->tech->indicate) {
+ /* See if the channel driver can handle this condition. */
res = chan->tech->indicate(chan, condition, data, datalen);
+ }
+
ast_channel_unlock(chan);
- if (!chan->tech->indicate || res) {
- /*
- * Device does not support (that) indication, lets fake
- * it by doing our own tone generation. (PM2002)
- */
- if (condition < 0)
- ast_playtones_stop(chan);
- else {
- const struct ind_tone_zone_sound *ts = NULL;
- switch (condition) {
- case AST_CONTROL_RINGING:
- ts = ast_get_indication_tone(chan->zone, "ring");
- break;
- case AST_CONTROL_BUSY:
- ts = ast_get_indication_tone(chan->zone, "busy");
- break;
- case AST_CONTROL_CONGESTION:
- ts = ast_get_indication_tone(chan->zone, "congestion");
- break;
- }
- if (ts && ts->data[0]) {
- ast_debug(1, "Driver for channel '%s' does not support indication %d, emulating it\n", chan->name, condition);
- ast_playtones_start(chan,0,ts->data, 1);
- res = 0;
- chan->visible_indication = condition;
- } else if (condition == AST_CONTROL_PROGRESS) {
- /* ast_playtones_stop(chan); */
- } else if (condition == AST_CONTROL_PROCEEDING) {
- /* Do nothing, really */
- } else if (condition == AST_CONTROL_HOLD) {
- /* Do nothing.... */
- } else if (condition == AST_CONTROL_UNHOLD) {
- /* Do nothing.... */
- } else if (condition == AST_CONTROL_VIDUPDATE) {
- /* Do nothing.... */
- } else if (condition == AST_CONTROL_SRCUPDATE) {
- /* Do nothing... */
- } else {
- /* not handled */
- ast_log(LOG_WARNING, "Unable to handle indication %d for '%s'\n", condition, chan->name);
- res = -1;
- }
- }
- } else
+
+ if (chan->tech->indicate && !res) {
+ /* The channel driver successfully handled this indication */
+ if (is_visible_indication(condition)) {
+ chan->visible_indication = condition;
+ }
+ return 0;
+ }
+
+ /* The channel driver does not support this indication, let's fake
+ * it by doing our own tone generation if applicable. */
+
+ if (condition < 0) {
+ /* Stop any tones that are playing */
+ ast_playtones_stop(chan);
+ return 0;
+ }
+
+ /* Handle conditions that we have tones for. */
+ switch (condition) {
+ case AST_CONTROL_RINGING:
+ ts = ast_get_indication_tone(chan->zone, "ring");
+ break;
+ case AST_CONTROL_BUSY:
+ ts = ast_get_indication_tone(chan->zone, "busy");
+ break;
+ case AST_CONTROL_CONGESTION:
+ ts = ast_get_indication_tone(chan->zone, "congestion");
+ break;
+ case AST_CONTROL_PROGRESS:
+ case AST_CONTROL_PROCEEDING:
+ case AST_CONTROL_VIDUPDATE:
+ case AST_CONTROL_SRCUPDATE:
+ case AST_CONTROL_RADIO_KEY:
+ case AST_CONTROL_RADIO_UNKEY:
+ case AST_CONTROL_OPTION:
+ case AST_CONTROL_WINK:
+ case AST_CONTROL_FLASH:
+ case AST_CONTROL_OFFHOOK:
+ case AST_CONTROL_TAKEOFFHOOK:
+ case AST_CONTROL_ANSWER:
+ case AST_CONTROL_HANGUP:
+ case AST_CONTROL_RING:
+ case AST_CONTROL_HOLD:
+ case AST_CONTROL_UNHOLD:
+ case AST_CONTROL_T38:
+ /* Nothing left to do for these. */
+ res = 0;
+ break;
+ }
+
+ if (ts && ts->data[0]) {
+ /* We have a tone to play, yay. */
+ ast_debug(1, "Driver for channel '%s' does not support indication %d, emulating it\n", chan->name, condition);
+ ast_playtones_start(chan, 0, ts->data, 1);
+ res = 0;
chan->visible_indication = condition;
+ }
+
+ if (res) {
+ /* not handled */
+ ast_log(LOG_WARNING, "Unable to handle indication %d for '%s'\n", condition, chan->name);
+ }
return res;
}
@@ -4037,7 +4099,7 @@
/* XXX What about blocking, softhangup, blocker, and lock and blockproc? XXX */
/* Application and data remain the same */
/* Clone exception becomes real one, as with fdno */
- ast_copy_flags(original, clone, AST_FLAG_EXCEPTION);
+ ast_copy_flags(original, clone, AST_FLAG_EXCEPTION | AST_FLAG_OUTGOING);
original->fdno = clone->fdno;
/* Schedule context remains the same */
/* Stream stuff stays the same */
@@ -4083,10 +4145,18 @@
ast_log(LOG_WARNING, "Channel type '%s' does not have a fixup routine (for %s)! Bad things may happen.\n",
original->tech->type, original->name);
- /* If an indication is currently playing maintain it on the channel that is taking the place of original */
- if (original->visible_indication)
+ /*
+ * If an indication is currently playing, maintain it on the channel
+ * that is taking the place of original
+ *
+ * This is needed because the masquerade is swapping out in the internals
+ * of this channel, and the new channel private data needs to be made
+ * aware of the current visible indication (RINGING, CONGESTION, etc.)
+ */
+ if (original->visible_indication) {
ast_indicate(original, original->visible_indication);
-
+ }
+
/* Now, at this point, the "clone" channel is totally F'd up. We mark it as
a zombie so nothing tries to touch it. If it's already been marked as a
zombie, then free it now (since it already is considered invalid). */
Modified: branches/1.6.0/main/features.c
URL: http://svn.digium.com/view/asterisk/branches/1.6.0/main/features.c?view=diff&rev=164279&r1=164278&r2=164279
==============================================================================
--- branches/1.6.0/main/features.c (original)
+++ branches/1.6.0/main/features.c Mon Dec 15 10:26:09 2008
@@ -1937,8 +1937,16 @@
if (chan && peer) {
pbx_builtin_setvar_helper(chan, "BRIDGEPEER", peer->name);
pbx_builtin_setvar_helper(peer, "BRIDGEPEER", chan->name);
- } else if (chan)
+ } else if (chan) {
pbx_builtin_setvar_helper(chan, "BLINDTRANSFER", NULL);
+ }
+
+ /* This is an interesting case. One example is if a ringing channel gets redirected to
+ * an extension that picks up a parked call. This will make sure that the call taken
+ * out of parking gets told that the channel it just got bridged to is still ringing. */
+ if (chan->_state == AST_STATE_RINGING && peer->visible_indication != AST_CONTROL_RINGING) {
+ ast_indicate(peer, AST_CONTROL_RINGING);
+ }
if (monitor_ok) {
const char *monitor_exec;
More information about the asterisk-commits
mailing list