[asterisk-commits] russell: branch 1.4 r58638 - in
/branches/1.4/doc: sla.pdf sla.tex sla.txt
asterisk-commits at lists.digium.com
asterisk-commits at lists.digium.com
Fri Mar 9 16:59:11 MST 2007
Author: russell
Date: Fri Mar 9 17:59:10 2007
New Revision: 58638
URL: http://svn.digium.com/view/asterisk?view=rev&rev=58638
Log:
Merge some updates to the SLA documentation. I plan to keep working on this
to explain all of the expected behavior with call handling, configuration
details for specific phones, and other things. However, I got tired of doing
it in plain text, so I switched to using LaTeX. I have included the PDF version.
I haven't been able to get a nice looking plain text version out of it yet, but
I'm not terribly concerned since this is supposed to be more of the manual,
while the plain text sample configuration file is the reference.
Added:
branches/1.4/doc/sla.pdf (with props)
branches/1.4/doc/sla.tex (with props)
Removed:
branches/1.4/doc/sla.txt
Added: branches/1.4/doc/sla.pdf
URL: http://svn.digium.com/view/asterisk/branches/1.4/doc/sla.pdf?view=auto&rev=58638
==============================================================================
Binary file - no diff available.
Propchange: branches/1.4/doc/sla.pdf
------------------------------------------------------------------------------
svn:mime-type = application/octet-stream
Added: branches/1.4/doc/sla.tex
URL: http://svn.digium.com/view/asterisk/branches/1.4/doc/sla.tex?view=auto&rev=58638
==============================================================================
--- branches/1.4/doc/sla.tex (added)
+++ branches/1.4/doc/sla.tex Fri Mar 9 17:59:10 2007
@@ -1,0 +1,339 @@
+\documentclass[12pt,a4]{article}
+\usepackage{hyperref}
+
+\author{Russell Bryant \\ Software Engineer \\ Digium, Inc.}
+\title{Shared Line Appearances}
+
+\begin{document}
+\maketitle
+
+\tableofcontents
+
+\section{Introduction}
+
+The "SLA" functionality in Asterisk is intended to allow a setup that emulates
+a simple key system. It uses the various abstraction layers already built into
+Asterisk to emulate key system functionality across various devices, including
+IP channels.
+
+\section{Configuration}
+
+\subsection{Summary}
+
+An SLA system is built up of virtual trunks and stations mapped to real
+Asterisk devices. The configuration for all of this is done in three
+different files: extensions.conf, sla.conf, and the channel specific
+configuration file such as sip.conf or zapata.conf.
+
+\subsection{Dialplan}
+
+The SLA implementation can automatically generate the dialplan necessary for
+basic operation if the "autocontext" option is set for trunks and stations in
+sla.conf. However, for reference, here is an automatically generated dialplan
+to help with custom building of the dialplan to include other features, such as
+voicemail (\ref{voicemail}).
+
+However, note that there is a little bit of additional configuration needed if
+the trunk is an IP channel. This is discussed in the section on trunks (\ref{trunks}).
+
+There are extensions for incoming calls on a specific trunk, which execute the SLATrunk
+application, as well as incoming calls from a station, which execute SLAStation.
+Note that there are multiple extensions for incoming calls from a station. This is
+because the SLA system has to know whether the phone just went off hook, or if the
+user pressed a specific line button.
+
+Also note that there is a hint for every line on every station. This lets the SLA
+system control each individual light on every phone to ensure that it shows the
+correct state of the line. The phones must subscribe to the state of each of their
+line appearances.
+
+\begin{verbatim}
+
+[line1]
+exten => s,1,SLATrunk(line1)
+
+[line2]
+exten => s,2,SLATrunk(line2)
+
+[sla_stations]
+exten => station1,1,SLAStation(station1)
+exten => station1_line1,hint,SLA:station1_line1
+exten => station1_line1,1,SLAStation(station1_line1)
+exten => station1_line2,hint,SLA:station1_line2
+exten => station1_line2,1,SLAStation(station1_line2)
+
+exten => station2,1,SLAStation(station2)
+exten => station2_line1,hint,SLA:station2_line1
+exten => station2_line1,1,SLAStation(station2_line1)
+exten => station2_line2,hint,SLA:station2_line2
+exten => station2_line2,1,SLAStation(station2_line2)
+
+exten => station3,1,SLAStation(station3)
+exten => station3_line1,hint,SLA:station3_line1
+exten => station3_line1,1,SLAStation(station3_line1)
+exten => station3_line2,hint,SLA:station3_line2
+exten => station3_line2,1,SLAStation(station3_line2)
+
+\end{verbatim}
+
+\subsection{Trunks}
+\label{trunks}
+
+An SLA trunk is a mapping between a virtual trunk and a real Asterisk device.
+This device may be an analog FXO line, or something like a SIP trunk. A trunk
+must be configured in two places. First, configure the device itself in the
+channel specific configuration file such as zapata.conf or sip.conf. Once the
+trunk is configured, then map it to an SLA trunk in sla.conf.
+
+\begin{verbatim}
+[line1]
+type=trunk
+device=Zap/1
+\end{verbatim}
+
+Be sure to configure the trunk's context to be the same one that is set for the
+"autocontext" option in sla.conf if automatic dialplan configuration is used.
+This would be done in the regular device entry in zapata.conf, sip.conf, etc.
+Note that the automatic dialplan generation creates the SLATrunk() extension
+at extension 's'. This is perfect for Zap channels that are FXO trunks, for
+example. However, it may not be good enough for an IP trunk, since the call
+coming in over the trunk may specify an actual number.
+
+If the dialplan is being built manually, ensure that calls coming in on a trunk
+execute the SLATrunk() application with an argument of the trunk name, as shown
+in the dialplan example before.
+
+IP trunks can be used, but they require some additional configuration to work.
+
+For this example, let's say we have a SIP trunk called "mytrunk" that is going
+to be used as line4. Furthermore, when calls come in on this trunk, they are
+going to say that they are calling the number "12564286000". Also, let's say
+that the numbers that are valid for calling out this trunk are NANP numbers,
+of the form \_1NXXNXXXXXX.
+
+In sip.conf, there would be an entry for [mytrunk]. For [mytrunk],
+set context=line4.
+
+
+\begin{verbatim}
+[line4]
+type=trunk
+device=Local/disa at line4_outbound
+\end{verbatim}
+
+
+\begin{verbatim}
+[line4]
+exten => 12564286000,1,SLATrunk(line4)
+
+[line4_outbound]
+exten => disa,1,Disa(no-password|line4_outbound)
+exten => _1NXXNXXXXXX,1,Dial(SIP/\${EXTEN}@mytrunk)
+\end{verbatim}
+
+
+So, when a station picks up their phone and connects to line 4, they are
+connected to the local dialplan. The Disa application plays dialtone to the
+phone and collects digits until it matches an extension. In this case, once
+the phone dials a number like 12565551212, the call will proceed out the
+SIP trunk.
+
+\subsection{Stations}
+
+An SLA station is a mapping between a virtual station and a real Asterisk device.
+Currently, the only channel driver that has all of the features necessary to
+support an SLA environment is chan\_sip. So, to configure a SIP phone to use
+as a station, you must configure sla.conf and sip.conf.
+
+\begin{verbatim}
+[station1]
+type=station
+device=SIP/station1
+trunk=line1
+trunk=line2
+\end{verbatim}
+
+Here are some hints on configuring a SIP phone for use with SLA:
+
+\begin{enumerate}
+\item Add the SIP channel as a [station] in sla.conf.
+
+\item Configure the phone in sip.conf. If automatic dialplan configuration was
+ used by enabling the "autocontext" option in sla.conf, then this entry in
+ sip.conf should have the same context setting.
+
+\item On the phone itself, there are various things that must be configured to
+ make everything work correctly:
+
+ Let's say this phone is called "station1" in sla.conf, and it uses trunks
+ named "line1" and line2".
+ \begin{enumerate}
+
+ \item Two line buttons must be configured to subscribe to the state of the
+ following extensions:
+ - station1\_line1
+ - station1\_line2
+
+ \item The line appearance buttons should be configured to dial the extensions
+ that they are subscribed to when they are pressed.
+
+ \item If you would like the phone to automatically connect to a trunk when it
+ is taken off hook, then the phone should be automatically configured to
+ dial "station1" when it is taken off hook.
+
+ \end{enumerate}
+\end{enumerate}
+
+
+\section{Configuration Examples}
+\subsection{SLA and Voicemail}
+\label{voicemail}
+
+This is an example of how you could set up a single voicemail box for the
+phone system. The voicemail box number used in this example is 1234, which
+would be configured in voicemail.conf.
+
+For this example, assume that there are 2 trunks and 3 stations. The trunks
+are Zap/1 and Zap/2. The stations are SIP/station1, SIP/station2, and
+SIP/station3.
+
+In zapata.conf, channel 1 has context=line1 and channel 2 has context=line2.
+
+In sip.conf, all three stations are configured with context=sla\_stations.
+
+When the stations pick up their phones to dial, they are allowed to dial
+NANP numbers for outbound calls, or 8500 for checking voicemail.
+
+
+sla.conf:
+\begin{verbatim}
+[line1]
+type=trunk
+device=Local/disa at line1_outbound
+
+[line2]
+type=trunk
+device=Local/disa at line2_outbound
+
+[station](!)
+type=station
+trunk=line1
+trunk=line2
+
+[station1](station)
+device=SIP/station1
+
+[station2](station)
+device=SIP/station2
+
+[station3](station)
+device=SIP/station3
+
+\end{verbatim}
+
+
+extensions.conf:
+\begin{verbatim}
+[macro-slaline]
+exten => s,1,SLATrunk(${ARG1})
+exten => s,n,Goto(s-${SLATRUNK_STATUS}|1)
+exten => s-FAILURE,1,Voicemail(1234|u)
+exten => s-UNANSWERED,1,Voicemail(1234|u)
+
+[line1]
+exten => s,1,Macro(slaline|line1)
+
+[line2]
+exten => s,2,Macro(slaline|line2)
+
+[line1_outbound]
+exten => disa,1,Disa(no-password|line1_outbound)
+exten => _1NXXNXXXXXX,1,Dial(Zap/1/${EXTEN})
+exten => 8500,1,VoicemailMain(1234)
+
+[line2_outbound]
+exten => disa,1,Disa(no-password|line2_outbound)
+exten => _1NXXNXXXXXX,1,Dial(Zap/2/${EXTEN})
+exten => 8500,1,VoicemailMain(1234)
+
+[sla_stations]
+
+exten => station1,1,SLAStation(station1)
+exten => station1_line1,hint,SLA:station1_line1
+exten => station1_line1,1,SLAStation(station1_line1)
+exten => station1_line2,hint,SLA:station1_line2
+exten => station1_line2,1,SLAStation(station1_line2)
+
+exten => station2,1,SLAStation(station2)
+exten => station2_line1,hint,SLA:station2_line1
+exten => station2_line1,1,SLAStation(station2_line1)
+exten => station2_line2,hint,SLA:station2_line2
+exten => station2_line2,1,SLAStation(station2_line2)
+
+exten => station3,1,SLAStation(station3)
+exten => station3_line1,hint,SLA:station3_line1
+exten => station3_line1,1,SLAStation(station3_line1)
+exten => station3_line2,hint,SLA:station3_line2
+exten => station3_line2,1,SLAStation(station3_line2)
+
+\end{verbatim}
+
+\section{Call Handling}
+\subsection{Summary}
+
+This section is intended to describe how Asterisk handles calls inside of the
+SLA system so that it is clear what behavior is expected.
+
+Note that this section is not yet complete.
+
+\subsection{Station goes off hook (not ringing)}
+
+When a station goes off hook, it should initiate a call to Asterisk with the
+extension that indicates that the phone went off hook without specifying a
+specific line. In the examples in this document, for the station named
+"station1", this extension is simply named, "station1".
+
+Asterisk will attempt to connect this station to the first available trunk
+that is not in use. Asterisk will check the trunks in the order that they
+were specified in the station entry in sla.conf. If all trunks are in use,
+the call will be denied.
+
+If Asterisk is able to acquire an idle trunk for this station, then trunk
+is connected to the station and the station will hear dialtone. The station
+can then proceed to dial a number to call. As soon as a trunk is acquired,
+all appearances of this line on stations will show that the line is in use.
+
+\subsection{Station goes off hook (ringing)}
+
+When a station goes off hook while it is ringing, it should simply answer
+the call that had been initiated to it to make it ring. Once the station
+has answered, Asterisk will figure out which trunk to connect it to. It
+will connect it to the highest priority trunk that is currently ringing.
+Trunk priority is determined by the order that the trunks are listed in
+the station entry in sla.conf.
+
+\subsection{Line button on a station is pressed}
+
+When a line button is pressed on a station, the station should initiate a
+call to Asterisk with the extension that indicates which line button was
+pressed. In the examples given in this document, for a station named
+"station1" and a trunk named "line1", the extension would be "station1\_line1".
+
+If the specified trunk is not in use, then the station will be connected to it and
+will hear dialtone. All appearances of this trunk will then show that it
+is now in use.
+
+If the specified trunk is on hold by this station, then this station will be
+reconnected to the trunk. The line appearance for this trunk on this station
+will now show in use. If this was the only station that had the call on hold,
+then all appearances of this trunk will now show that it is in use. Otherwise,
+all stations that are not currently connected to this trunk will show it
+on hold.
+
+If the specified trunk is on hold by a different station, then this station
+will be connected to the trunk only if the trunk itself and the station(s) that
+have it on hold do not have private hold enabled. If connected, the appeareance
+of this trunk on this station will then show in use. All stations that are not
+currently connected to this trunk will show it on hold.
+
+\end{document}
Propchange: branches/1.4/doc/sla.tex
------------------------------------------------------------------------------
svn:eol-style = native
Propchange: branches/1.4/doc/sla.tex
------------------------------------------------------------------------------
svn:keywords = Author Date Id Revision
Propchange: branches/1.4/doc/sla.tex
------------------------------------------------------------------------------
svn:mime-type = text/plain
More information about the asterisk-commits
mailing list