[asterisk-commits] russell: trunk r47210 - /trunk/configs/zapata.conf.sample

[asterisk-commits at lists.digium.com]

Author: russell
Date: Sat Nov  4 16:41:12 2006
New Revision: 47210

URL: http://svn.digium.com/view/asterisk?rev=47210&view=rev
Log:
List ss7 with the rest of the valid signalling types.  Group SS7 options
together and comment them out by default.

Modified:
    trunk/configs/zapata.conf.sample

Modified: trunk/configs/zapata.conf.sample
URL: http://svn.digium.com/view/asterisk/trunk/configs/zapata.conf.sample?rev=47210&r1=47209&r2=47210&view=diff
==============================================================================
--- trunk/configs/zapata.conf.sample (original)
+++ trunk/configs/zapata.conf.sample Sat Nov  4 16:41:12 2006
@@ -198,6 +198,7 @@
 ; sf_txrx:        Receive audio/COR AND Transmit audio/PTT on an SF interface
 ;                 (2-way)
 ; sf_rxtx:        Same as sf_txrx (for our dyslexic friends)
+; ss7:            Signalling System 7
 ;
 signalling=fxo_ls
 ;
@@ -656,40 +657,38 @@
 ;context=default
 ;channel => 1 
 
-; Signaling type SS7
-signalling = ss7
-
+; ---------------- Options for use with signalling=ss7 -----------------
 ; Variant of SS7 signaling:
 ; Options are itu and ansi
-ss7type = itu
+;ss7type = itu
 
 ; All settings apply to linkset 1
-linkset = 1
+;linkset = 1
 
 ; Point code of the linkset.  For ITU, this is the decimal number
 ; format of the point code.  For ANSI, this can either be in decimal
 ; number format or in the xxx.xxx.xxx format
-pointcode = 1
+;pointcode = 1
 
 ; Point code of node adjacent to this signaling link (Possibly the STP between you and
 ; your destination).  Point code format follows the same rules as above.
-adjpointcode = 2
+;adjpointcode = 2
 
 ; Default point code that you would like to assign to outgoing messages (in case of
 ; routing through STPs, or using A links).  Point code format follows the same rules
 ; as above.
-defaultdpc = 3
+;defaultdpc = 3
 
 ; Begin CIC (Circuit indication codes) count with this number
-cicbeginswith = 1
+;cicbeginswith = 1
 
 ; What the MTP3 network indicator bits should be set to.  Choices are
 ; national, national_spare, international, international_spare
-networkindicator=international
+;networkindicator=international
 
 ; First signaling channel
-sigchan = 48
+;sigchan = 48
 
 ; Channels to associate with CICs on this linkset
-channel = 25-47
-
+;channel = 25-47
+; ----------------- SS7 Options ----------------------------------------