[asterisk-commits] trunk r15514 - /trunk/channels/chan_oss.c
asterisk-commits at lists.digium.com
asterisk-commits at lists.digium.com
Tue Mar 28 06:23:07 MST 2006
Author: rizzo
Date: Tue Mar 28 07:23:05 2006
New Revision: 15514
URL: http://svn.digium.com/view/asterisk?rev=15514&view=rev
Log:
fix documentation
Modified:
trunk/channels/chan_oss.c
Modified: trunk/channels/chan_oss.c
URL: http://svn.digium.com/view/asterisk/trunk/channels/chan_oss.c?rev=15514&r1=15513&r2=15514&view=diff
==============================================================================
--- trunk/channels/chan_oss.c (original)
+++ trunk/channels/chan_oss.c Tue Mar 28 07:23:05 2006
@@ -94,24 +94,51 @@
START_CONFIG
[general]
-; general config options, default values are shown
-; all but debug can go also in the device-specific sections.
-; debug=0x0 ; misc debug flags, default is 0
+ ; General config options, with default values shown.
+ ; You should use one section per device, with [general] being used
+ ; for the first device and also as a template for other devices.
+ ;
+ ; All but 'debug' can go also in the device-specific sections.
+ ;
+ ; debug = 0x0 ; misc debug flags, default is 0
+
+ ; Set the device to use for I/O
+ ; device = /dev/dsp
+
+ ; Optional mixer command to run upon startup (e.g. to set
+ ; volume levels, mutes, etc.
+ ; mixer =
+
+ ; Software mic volume booster (or attenuator), useful for sound
+ ; cards or microphones with poor sensitivity. The volume level
+ ; is in dB, ranging from -20.0 to +20.0
+ ; boost = n ; mic volume boost in dB
+
+ ; Set the callerid for outgoing calls
+ ; callerid = John Doe <555-1234>
+
+ ; autoanswer = no ; no autoanswer on call
+ ; autohangup = yes ; hangup when other party closes
+ ; extension = s ; default extension to call
+ ; context = default ; default context for outgoing calls
+ ; language = "" ; default language
+
+ ; If you set overridecontext to 'yes', then the whole dial string
+ ; will be interpreted as an extension, which is extremely useful
+ ; to dial SIP, IAX and other extensions which use the '@' character.
+ ; The default is 'no' just for backward compatibility, but the
+ ; suggestion is to change it.
+ ; overridecontext = no ; if 'no', the last @ will start the context
+ ; if 'yes' the whole string is an extension.
+
+ ; low level device parameters in case you have problems with the
+ ; device driver on your operating system. You should not touch these
+ ; unless you know what you are doing.
+ ; queuesize = 10 ; frames in device driver
+ ; frags = 8 ; argument to SETFRAGMENT
[card1]
-; autoanswer = no ; no autoanswer on call
-; autohangup = yes ; hangup when other party closes
-; extension=s ; default extension to call
-; context=default ; default context
-; language="" ; default language
-; overridecontext=yes ; the whole dial string is considered an extension.
- ; if no, the last @ will start the context
-
-; device=/dev/dsp ; device to open
-; mixer="-f /dev/mixer0 pcm 80 ; mixer command to run on start
-; queuesize=10 ; frames in device driver
-; frags=8 ; argument to SETFRAGMENT
-; boost = n ; mic volume boost in dB
+ ; device = /dev/dsp1 ; alternate device
END_CONFIG
More information about the asterisk-commits
mailing list