[asterisk-commits] trunk - r7446 in /trunk:
configs/misdn.conf.sample doc/README.misdn
asterisk-commits at lists.digium.com
asterisk-commits at lists.digium.com
Mon Dec 12 16:26:38 CST 2005
Author: crichter
Date: Mon Dec 12 16:26:35 2005
New Revision: 7446
URL: http://svn.digium.com/view/asterisk?rev=7446&view=rev
Log:
updated the documentation and the sample config to meet the present
Modified:
trunk/configs/misdn.conf.sample
trunk/doc/README.misdn
Modified: trunk/configs/misdn.conf.sample
URL: http://svn.digium.com/view/asterisk/trunk/configs/misdn.conf.sample?rev=7446&r1=7445&r2=7446&view=diff
==============================================================================
--- trunk/configs/misdn.conf.sample (original)
+++ trunk/configs/misdn.conf.sample Mon Dec 12 16:26:35 2005
@@ -20,6 +20,7 @@
;
debug=0
+
; the big trace
;
; default value: [not set]
@@ -40,7 +41,7 @@
;
; default value: yes
;
-bridging=yes
+bridging=no
; stops dialtone after getting first digit on nt Port
;
@@ -67,15 +68,6 @@
; default value: no
;
clear_l3=no
-
-; set the method to use for channel selection:
-; standard - always choose the first free channel with the lowest number
-; round_robin - use the round robin algorithm to select a channel. use this
-; if you want to balance your load.
-;
-; default value: standard
-;
-method=standard
;;; CRYPTION STUFF
@@ -125,6 +117,16 @@
;
language=en
+;
+; sets the musiconhold class
+;
+musicclass=default
+
+;
+; Either if we should produce DTMF Tones ourselve
+;
+senddtmf=yes
+
; Prefixes for national and international, those are put before the
; oad if an according dialplan is set by the other end.
;
@@ -149,11 +151,23 @@
;
te_choose_channel=no
+; set the method to use for channel selection:
+; standard - always choose the first free channel with the lowest number
+; round_robin - use the round robin algorithm to select a channel. use this
+; if you want to balance your load.
+;
+; default value: standard
+;
+method=standard
+
+;
+; dialplan means Type Of Number in ISDN Terms (for outgoing calls)
+;
; dialplan options:
;
; 0 - unknown
-; 1 - National
-; 2 - International
+; 1 - International
+; 2 - National
; 4 - Subscriber
;
; This setting is used for outgoing calls
@@ -161,6 +175,7 @@
; default value: 0
;
dialplan=0
+localdialplan=0
; This is only for asterisk head and will result in only considering
; misdn.confs and misdn_set_opts callingpresentation informations if set to no.
@@ -169,6 +184,13 @@
; default value: yes
;
use_callingpres=yes
+
+
+
+;
+; turn this to no if you don't mind correct handling of Progress Indicators
+;
+early_bconnect=yes
; uncomment the following to get into s extension at extension conf
; there you can use DigitTimeout if you can't or don't want to use
@@ -235,6 +257,17 @@
; default value: yes
;
echotraining=yes
+
+;
+; chan_misdns jitterbuffer, default 1000
+;
+jitterbuffer=1000
+
+;
+; change this threshold to enable dejitter functionality
+;
+jitterbuffer_upper_threshold=0
+
[intern]
; define your ports, e.g. 1,2 (depends on mISDN-driver loading order)
Modified: trunk/doc/README.misdn
URL: http://svn.digium.com/view/asterisk/trunk/doc/README.misdn?rev=7446&r1=7445&r2=7446&view=diff
==============================================================================
--- trunk/doc/README.misdn (original)
+++ trunk/doc/README.misdn Mon Dec 12 16:26:35 2005
@@ -21,13 +21,13 @@
* Data (HDLC) callthrough
* Data Calling (with app_ptyfork +pppd)
* Echo cancellation
+* CallDeflection
* Some other
Supported Hardware:
-------------------
-chan_misdn supports any mISDN compatible Hardware. Especially the 1-8 Port
-BRI Cards available from http://shop.beronet.com
+chan_misdn supports any mISDN compatible Hardware.
Overview
--------
@@ -49,48 +49,28 @@
Fast Installation Guide
-----------------------
-You have two options on how to install chan_misdn.
-
-(1) Requirements:
- - mISDN and mISDNuser from jolly (see Pre-Requisites below)
- Installation:
- - cd <asterisk-src-dir>/channels/misdn
- - edit Makefile so that MISDNUSER points to your mISDNuser directory
- - run 'make'
- - cd <asterisk-src-dir>
- - compile and install asterisk via 'make install'
-
-(2) Requirements:
- - Asterisk headers and Kernel headers
- Description:
- The Makefile gets the newest mISDN and mISDNuser Sources from
- jollys webpage and the newest release of chan_misdn from beronets
- Servers. After that it compiles and installs everything (hopefully).
- Installation:
- - cd /usr/src
- - wget http://www.beronet.com/downloads/install-misdn.tar.gz
- - tar zxf install-misdn.tar.gz
- - cd install-misdn
- - make install
+It is easy to install mISDN and mISDNuser. Using the Makefile from
+channels/misdn. You just need to type:
+
+cd channels/misdn
+make misdn
+
+Then all the necessary files are fetched from isdn4linux.de.
Pre-Requisites
--------------
-To compile and install this driver, you'll need at least one mISDN Driver, the
-mISDNuser package and the Asterisk includes (which will be inside of the
-sources). Chan_misdn works with both, the current release version and the
-development (svn trunk) version of Asterisk.
-
-To get the mISDN stuff please follow the instructions at
-http://www.isdn4linux.de. Please Note that mISDN works good for the
-linux-2.6.x kernels. Some of the mISDN drivers do not compile against the
-2.4.x or older kernels, you can patch them, but than you'll get mysterious
-errors.
-
-I use Kernels > 2.6.9 and it works perfect. with kernels >= 2.6.10 there is a
-very litle bug in hfc_multi.c which causes the module not to compile, it can
-be easily fixed by changing pci_findsubsys to pci_getsubsys in code.
+To compile and install this driver, you'll need at least one mISDN Driver and
+the mISDNuser package. Chan_misdn works with both, the current release version
+and the development (svn trunk) version of Asterisk. mISDNuser and mISDN must
+be fetched from cvs.isdn4linux.de (mqueue branch).
+
+Please Note that mISDN works good for the linux-2.6.x kernels. Some of the
+mISDN drivers do not compile against the 2.4.x or older kernels, you can patch
+them, but than you'll get mysterious errors.
+
+Using Kernels > 2.6.9 works perfect.
Ok so far so good, now follow the compilation instructions.
@@ -99,44 +79,24 @@
Compilation
-----------
-!! Be aware, in the actual mISDNuser package theres a bug in the Makefile
-!! the compilation stops near iapplication.h, this isn't very important
-!! at this step you are ready.
-
-After you've successfully installed mISDN, mISDNuser and Asterisk, you should
-modify the Makefile in the chan_misdn source path. There you can tell the
-Makefile where to install the driver, sample-conf, and most important where it
-can find the linux kernel includes, the mISDNuser package and the Asterisk
-includes. If you use the development version of Asterisk (or at least a newer
-version than release) uncomment the CCFLAGS+=-DASTERISK_STABLE, the release
-version of Asterisk is at the moment v1-2 as subversion branch.
-
-Now you can type in:
-
-make
-
-This should compile chan_misdn.so, if there's an error check the paths in the
-Makefile again.
+The compilation of chan_misdn requires a library which will be generated under
+channels/misdn/.
+
+To compile this library you just need to go into this directory and type
+make. Now you can go back to the asterisk source root and type make install
+again, which now should compile and install chan_misdn.
+
Installation
------------
-After successful compilation of chan_misdn, you should simply type in:
-
-make install
-
-as privileged user to put chan_misdn.so in the Asterisk modules
-directory.
-
-You should see a message like: "Successfully installed chan_misdn".
-Congratulations.
-
-Theres a sample init.d script for loading the mISDN modules (mISDN.sample),
-simply copy it to /etc/init.d/ and modify it, there you can enter your cards.
+Chan_misdn is automatically installed by the asterisk installation process.
+
+There is a sample init.d script for loading the mISDN modules (mISDN.sample),
+5Asimply copy it to /etc/init.d/ and modify it, there you can enter your cards.
!! Forget to use capi together with chan_misdn.
-
Configuration
@@ -161,6 +121,11 @@
configuration file, bigger numbers will lead to more debug output. There's also a
tracefile option, which takes a path+filename where debug output is written
to.
+
+- misdn.conf: [default] section
+The default section is another special section which can contain all the
+options available int the usr/port sections. the user/port section inherit
+their parameters from the default section.
- misdn.conf: user/port sections
The user sections have names which are unequal to "general". Those sections
@@ -205,8 +170,8 @@
vt - txgain control
-chan_misdn registers a new dial plan application "misdn_set_opt" when loaded. This
-application takes the Optionsstring as argument. The Syntax is:
+chan_misdn registers a new dial plan application "misdn_set_opt" when
+loaded. This application takes the Optionsstring as argument. The Syntax is:
misdn_set_opt(<OPTIONSSTRING>)
@@ -343,6 +308,11 @@
* asterisk >= v1-0.2 , also CVS Head
* mISDN/mISDNuser (3.0-beta) from isdn.jolly.de
+- chan_misdn-0.2.1
+ * linux-kernel >= 2.6.8 (but at least 2.6)
+ * asterisk >= v1.2 , also CVS Head
+ * mISDN/mISDNuser (3.0) from isdn.jolly.de
+
Known Problems
--------------
More information about the asterisk-commits
mailing list