[asterisk-commits] branch crichter/0.2.1 - r7344
/team/crichter/0.2.1/doc/README.misdn
asterisk-commits at lists.digium.com
asterisk-commits at lists.digium.com
Mon Dec 5 13:29:15 CST 2005
Author: crichter
Date: Mon Dec 5 13:29:12 2005
New Revision: 7344
URL: http://svn.digium.com/view/asterisk?rev=7344&view=rev
Log:
removed hidden advertisements and updated some parts to the present
Modified:
team/crichter/0.2.1/doc/README.misdn
Modified: team/crichter/0.2.1/doc/README.misdn
URL: http://svn.digium.com/view/asterisk/team/crichter/0.2.1/doc/README.misdn?rev=7344&r1=7343&r2=7344&view=diff
==============================================================================
--- team/crichter/0.2.1/doc/README.misdn (original)
+++ team/crichter/0.2.1/doc/README.misdn Mon Dec 5 13:29:12 2005
@@ -26,8 +26,7 @@
Supported Hardware:
-------------------
-chan_misdn supports any mISDN compatible Hardware. Especially the 1-8 Port
-BRI Cards available from http://shop.beronet.com
+chan_misdn supports any mISDN compatible Hardware.
Overview
--------
@@ -49,48 +48,29 @@
Fast Installation Guide
-----------------------
-You have two options on how to install chan_misdn.
-
-(1) Requirements:
- - mISDN and mISDNuser from jolly (see Pre-Requisites below)
- Installation:
- - cd <asterisk-src-dir>/channels/misdn
- - edit Makefile so that MISDNUSER points to your mISDNuser directory
- - run 'make'
- - cd <asterisk-src-dir>
- - compile and install asterisk via 'make install'
-
-(2) Requirements:
- - Asterisk headers and Kernel headers
- Description:
- The Makefile gets the newest mISDN and mISDNuser Sources from
- jollys webpage and the newest release of chan_misdn from beronets
- Servers. After that it compiles and installs everything (hopefully).
- Installation:
- - cd /usr/src
- - wget http://www.beronet.com/downloads/install-misdn.tar.gz
- - tar zxf install-misdn.tar.gz
- - cd install-misdn
- - make install
+It is easy to install mISDN and mISDNuser. Using the Makefile from
+channels/misdn. You just need to type:
+
+cd channels/misdn
+make misdn
+
+Then all the necessary files are fetched from jollys homepage and are patched
+with the Echocanellor.
Pre-Requisites
--------------
-To compile and install this driver, you'll need at least one mISDN Driver, the
-mISDNuser package and the Asterisk includes (which will be inside of the
-sources). Chan_misdn works with both, the current release version and the
-development (svn trunk) version of Asterisk.
-
-To get the mISDN stuff please follow the instructions at
-http://www.isdn4linux.de. Please Note that mISDN works good for the
-linux-2.6.x kernels. Some of the mISDN drivers do not compile against the
-2.4.x or older kernels, you can patch them, but than you'll get mysterious
-errors.
-
-I use Kernels > 2.6.9 and it works perfect. with kernels >= 2.6.10 there is a
-very litle bug in hfc_multi.c which causes the module not to compile, it can
-be easily fixed by changing pci_findsubsys to pci_getsubsys in code.
+To compile and install this driver, you'll need at least one mISDN Driver and
+the mISDNuser package. Chan_misdn works with both, the current release version
+and the development (svn trunk) version of Asterisk. mISDNuser and mISDN must
+be fetched from jollys homepage and must be patched with the Echocancellor.
+
+Please Note that mISDN works good for the linux-2.6.x kernels. Some of the
+mISDN drivers do not compile against the 2.4.x or older kernels, you can patch
+them, but than you'll get mysterious errors.
+
+Using Kernels > 2.6.9 works perfect.
Ok so far so good, now follow the compilation instructions.
@@ -99,44 +79,24 @@
Compilation
-----------
-!! Be aware, in the actual mISDNuser package theres a bug in the Makefile
-!! the compilation stops near iapplication.h, this isn't very important
-!! at this step you are ready.
-
-After you've successfully installed mISDN, mISDNuser and Asterisk, you should
-modify the Makefile in the chan_misdn source path. There you can tell the
-Makefile where to install the driver, sample-conf, and most important where it
-can find the linux kernel includes, the mISDNuser package and the Asterisk
-includes. If you use the development version of Asterisk (or at least a newer
-version than release) uncomment the CCFLAGS+=-DASTERISK_STABLE, the release
-version of Asterisk is at the moment v1-2 as subversion branch.
-
-Now you can type in:
-
-make
-
-This should compile chan_misdn.so, if there's an error check the paths in the
-Makefile again.
+The compilation of chan_misdn requires a library which will be generated under
+channels/misdn/.
+
+To compile this library you just need to go into this directory and type
+make. Now you can go back to the asterisk source root and type make install
+again, which now should compile and install chan_misdn.
+
Installation
------------
-After successful compilation of chan_misdn, you should simply type in:
-
-make install
-
-as privileged user to put chan_misdn.so in the Asterisk modules
-directory.
-
-You should see a message like: "Successfully installed chan_misdn".
-Congratulations.
-
-Theres a sample init.d script for loading the mISDN modules (mISDN.sample),
-simply copy it to /etc/init.d/ and modify it, there you can enter your cards.
+Chan_misdn is automatically installed by the asterisk installation process.
+
+There is a sample init.d script for loading the mISDN modules (mISDN.sample),
+5Asimply copy it to /etc/init.d/ and modify it, there you can enter your cards.
!! Forget to use capi together with chan_misdn.
-
Configuration
@@ -161,6 +121,11 @@
configuration file, bigger numbers will lead to more debug output. There's also a
tracefile option, which takes a path+filename where debug output is written
to.
+
+- misdn.conf: [default] section
+The default section is another special section which can contain all the
+options available int the usr/port sections. the user/port section inherit
+their parameters from the default section.
- misdn.conf: user/port sections
The user sections have names which are unequal to "general". Those sections
@@ -205,8 +170,8 @@
vt - txgain control
-chan_misdn registers a new dial plan application "misdn_set_opt" when loaded. This
-application takes the Optionsstring as argument. The Syntax is:
+chan_misdn registers a new dial plan application "misdn_set_opt" when
+loaded. This application takes the Optionsstring as argument. The Syntax is:
misdn_set_opt(<OPTIONSSTRING>)
@@ -343,6 +308,11 @@
* asterisk >= v1-0.2 , also CVS Head
* mISDN/mISDNuser (3.0-beta) from isdn.jolly.de
+- chan_misdn-0.2.1
+ * linux-kernel >= 2.6.8 (but at least 2.6)
+ * asterisk >= v1.2 , also CVS Head
+ * mISDN/mISDNuser (3.0) from isdn.jolly.de
+
Known Problems
--------------
More information about the asterisk-commits
mailing list