[Asterisk-code-review] res rtp asterisk: trigger source change control frame when d... (asterisk[master])

Joshua Colp asteriskteam at digium.com
Wed Jul 12 06:13:25 CDT 2017


Joshua Colp has submitted this change and it was merged. ( https://gerrit.asterisk.org/5934 )

Change subject: res_rtp_asterisk: trigger source change control frame when dtls is established
......................................................................

res_rtp_asterisk: trigger source change control frame when dtls is established

There needed to be a way to notify handlers upstream that DTLS had been
established. This patch makes it so once DTLS has been estalished a source
change control frame is put into the read queue. Any handlers can then watch
for that frame and trigger off of it.

ASTERISK-27096 #close

Change-Id: I27ff344f5a8c691a1890dfe3254a4b1a49e7f4a0
---
M res/res_rtp_asterisk.c
1 file changed, 19 insertions(+), 1 deletion(-)

Approvals:
  Joshua Colp: Looks good to me, approved; Approved for Submit



diff --git a/res/res_rtp_asterisk.c b/res/res_rtp_asterisk.c
index 600846c..dc09166 100644
--- a/res/res_rtp_asterisk.c
+++ b/res/res_rtp_asterisk.c
@@ -109,6 +109,8 @@
 #define SRTP_MASTER_SALT_LEN 14
 #define SRTP_MASTER_LEN (SRTP_MASTER_KEY_LEN + SRTP_MASTER_SALT_LEN)
 
+#define RTP_DTLS_ESTABLISHED -37
+
 enum strict_rtp_state {
 	STRICT_RTP_OPEN = 0, /*! No RTP packets should be dropped, all sources accepted */
 	STRICT_RTP_LEARN,    /*! Accept next packet as source */
@@ -2477,7 +2479,11 @@
 			/* Any further connections will be existing since this is now established */
 			dtls->connection = AST_RTP_DTLS_CONNECTION_EXISTING;
 			/* Use the keying material to set up key/salt information */
-			res = dtls_srtp_setup(rtp, srtp, instance, rtcp);
+			if ((res = dtls_srtp_setup(rtp, srtp, instance, rtcp))) {
+				return res;
+			}
+			/* Notify that dtls has been established */
+			res = RTP_DTLS_ESTABLISHED;
 		} else {
 			/* Since we've sent additional traffic start the timeout timer for retransmission */
 			dtls_srtp_start_timeout_timer(instance, rtp, rtcp);
@@ -4750,6 +4756,12 @@
 	/* Read in RTCP data from the socket */
 	if ((res = rtcp_recvfrom(instance, read_area, read_area_size,
 				0, &addr)) < 0) {
+		if (res == RTP_DTLS_ESTABLISHED) {
+			rtp->f.frametype = AST_FRAME_CONTROL;
+			rtp->f.subclass.integer = AST_CONTROL_SRCCHANGE;
+			return &rtp->f;
+		}
+
 		ast_assert(errno != EBADF);
 		if (errno != EAGAIN) {
 			ast_log(LOG_WARNING, "RTCP Read error: %s.  Hanging up.\n",
@@ -4947,6 +4959,12 @@
 	/* Actually read in the data from the socket */
 	if ((res = rtp_recvfrom(instance, read_area, read_area_size, 0,
 				&addr)) < 0) {
+		if (res == RTP_DTLS_ESTABLISHED) {
+			rtp->f.frametype = AST_FRAME_CONTROL;
+			rtp->f.subclass.integer = AST_CONTROL_SRCCHANGE;
+			return &rtp->f;
+		}
+
 		ast_assert(errno != EBADF);
 		if (errno != EAGAIN) {
 			ast_log(LOG_WARNING, "RTP Read error: %s.  Hanging up.\n",

-- 
To view, visit https://gerrit.asterisk.org/5934
To unsubscribe, visit https://gerrit.asterisk.org/settings

Gerrit-Project: asterisk
Gerrit-Branch: master
Gerrit-MessageType: merged
Gerrit-Change-Id: I27ff344f5a8c691a1890dfe3254a4b1a49e7f4a0
Gerrit-Change-Number: 5934
Gerrit-PatchSet: 3
Gerrit-Owner: Kevin Harwell <kharwell at digium.com>
Gerrit-Reviewer: Jenkins2
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: Kevin Harwell <kharwell at digium.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-code-review/attachments/20170712/419f467c/attachment.html>


More information about the asterisk-code-review mailing list