[Asterisk-code-review] res musiconhold: Add kill escalation delay, kill method to ... (asterisk[certified/13.13])
Jenkins2
asteriskteam at digium.com
Wed Jul 12 05:20:33 CDT 2017
Jenkins2 has submitted this change and it was merged. ( https://gerrit.asterisk.org/5987 )
Change subject: res_musiconhold: Add kill_escalation_delay, kill_method to class
......................................................................
res_musiconhold: Add kill_escalation_delay, kill_method to class
By default, when res_musiconhold reloads or unloads, it sends a HUP
signal to custom applications (and all descendants), waits 100ms,
then sends a TERM signal, waits 100ms, then finally sends a KILL
signal. An application which is interacting with an external
device and/or spawns children of its own may not be able to exit
cleanly in the default times, expecially if sent a KILL signal, or
if it's children are getting signals directly from
res_musiconhoild.
* To allow extra time, the 'kill_escalation_delay'
class option can be used to set the number of milliseconds
res_musiconhold waits before escalating kill signals, with the
default being the current 100ms.
* To control to whom the signals are sent, the "kill_method" class
option can be set to "process_group" (the default, existing
behavior), which sends signals to the application and its
descendants directly, or "process" which sends signals only to the
application itself.
Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b
---
M CHANGES
M configs/samples/musiconhold.conf.sample
M res/res_musiconhold.c
3 files changed, 123 insertions(+), 49 deletions(-)
Approvals:
Richard Mudgett: Looks good to me, but someone else must approve
Benjamin Keith Ford: Looks good to me, but someone else must approve
Joshua Colp: Looks good to me, approved; Verified
Jenkins2: Approved for Submit
diff --git a/CHANGES b/CHANGES
index 910b3eb..50810e3 100644
--- a/CHANGES
+++ b/CHANGES
@@ -9,6 +9,26 @@
==============================================================================
------------------------------------------------------------------------------
+--- Functionality changes from Asterisk 13.13-cert4 to Asterisk 13.13-cert5 --
+------------------------------------------------------------------------------
+
+res_musiconhold
+------------------
+ * By default, when res_musiconhold reloads or unloads, it sends a HUP signal
+ to custom applications (and all descendants), waits 100ms, then sends a
+ TERM signal, waits 100ms, then finally sends a KILL signal. An application
+ which is interacting with an external device and/or spawns children of its
+ own may not be able to exit cleanly in the default times, expecially if sent
+ a KILL signal, or if it's children are getting signals directly from
+ res_musiconhoild. To allow extra time, the 'kill_escalation_delay'
+ class option can be used to set the number of milliseconds res_musiconhold
+ waits before escalating kill signals, with the default being the current
+ 100ms. To control to whom the signals are sent, the "kill_method"
+ class option can be set to "process_group" (the default, existing behavior),
+ which sends signals to the application and its descendants directly, or
+ "process" which sends signals only to the application itself.
+
+------------------------------------------------------------------------------
--- Functionality changes from Asterisk 13.13.0 to Asterisk 13.13-cert1 ------
------------------------------------------------------------------------------
diff --git a/configs/samples/musiconhold.conf.sample b/configs/samples/musiconhold.conf.sample
index 1211c8a..f8f1206 100644
--- a/configs/samples/musiconhold.conf.sample
+++ b/configs/samples/musiconhold.conf.sample
@@ -87,3 +87,26 @@
;mode=custom
;directory=/var/lib/asterisk/mohmp3
;application=/site/sw/bin/madplay -Q -o raw:- --mono -R 8000 -a -12
+
+; By default, when res_musiconhold reloads or unloads, it sends a HUP signal
+; to custom applications (and all descendants), waits 100ms, then sends a
+; TERM signal, waits 100ms, then finally sends a KILL signal. An application
+; which is interacting with an external device and/or spawns children of its
+; own may not be able to exit cleanly in the default times, expecially if sent
+; a KILL signal, or if it's children are getting signals directly from
+; res_musiconhoild. To allow extra time, the 'kill_escalation_delay'
+; class option can be used to set the number of milliseconds res_musiconhold
+; waits before escalating kill signals, with the default being the current
+; 100ms. To control to whom the signals are sent, the "kill_method"
+; class option can be set to "process_group" (the default, existing behavior),
+; which sends signals to the application and its descendants directly, or
+; "process" which sends signals only to the application itself.
+
+;[sox_from_device]
+;mode=custom
+;directory=/var/lib/asterisk/mohmp3
+;application=/usr/bin/sox -q -t alsa -c 2 -r 48000 hw:1 -c 1 -r 8000 -t raw -s -
+; Wait 500ms before escalating kill signals
+;kill_escalation_delay=500
+; Send signals to just the child process instead of all descendants
+;kill_method=process
diff --git a/res/res_musiconhold.c b/res/res_musiconhold.c
index 6f51820..193d2da 100644
--- a/res/res_musiconhold.c
+++ b/res/res_musiconhold.c
@@ -157,6 +157,11 @@
static struct ast_flags global_flags[1] = {{0}}; /*!< global MOH_ flags */
+enum kill_methods {
+ KILL_METHOD_PROCESS_GROUP = 0,
+ KILL_METHOD_PROCESS
+};
+
struct mohclass {
char name[MAX_MUSICCLASS];
char dir[256];
@@ -177,6 +182,10 @@
int pid;
time_t start;
pthread_t thread;
+ /*! Millisecond delay between kill attempts */
+ size_t kill_delay;
+ /*! Kill method */
+ enum kill_methods kill_method;
/*! Source of audio */
int srcfd;
/*! Generic timer */
@@ -677,6 +686,51 @@
return fds[0];
}
+static int killer(pid_t pid, int signum, enum kill_methods kill_method)
+{
+ switch (kill_method) {
+ case KILL_METHOD_PROCESS_GROUP:
+ return killpg(pid, signum);
+ case KILL_METHOD_PROCESS:
+ return kill(pid, signum);
+ }
+
+ return -1;
+}
+
+static void killpid(int pid, size_t delay, enum kill_methods kill_method)
+{
+ if (killer(pid, SIGHUP, kill_method) < 0) {
+ if (errno == ESRCH) {
+ return;
+ }
+ ast_log(LOG_WARNING, "Unable to send a SIGHUP to MOH process '%d'?!!: %s\n", pid, strerror(errno));
+ } else {
+ ast_debug(1, "Sent HUP to pid %d%s\n", pid,
+ kill_method == KILL_METHOD_PROCESS_GROUP ? " and all children" : " only");
+ }
+ usleep(delay);
+ if (killer(pid, SIGTERM, kill_method) < 0) {
+ if (errno == ESRCH) {
+ return;
+ }
+ ast_log(LOG_WARNING, "Unable to terminate MOH process '%d'?!!: %s\n", pid, strerror(errno));
+ } else {
+ ast_debug(1, "Sent TERM to pid %d%s\n", pid,
+ kill_method == KILL_METHOD_PROCESS_GROUP ? " and all children" : " only");
+ }
+ usleep(delay);
+ if (killer(pid, SIGKILL, kill_method) < 0) {
+ if (errno == ESRCH) {
+ return;
+ }
+ ast_log(LOG_WARNING, "Unable to kill MOH process '%d'?!!: %s\n", pid, strerror(errno));
+ } else {
+ ast_debug(1, "Sent KILL to pid %d%s\n", pid,
+ kill_method == KILL_METHOD_PROCESS_GROUP ? " and all children" : " only");
+ }
+}
+
static void *monmp3thread(void *data)
{
#define MOH_MS_INTERVAL 100
@@ -752,28 +806,7 @@
class->srcfd = -1;
pthread_testcancel();
if (class->pid > 1) {
- do {
- if (killpg(class->pid, SIGHUP) < 0) {
- if (errno == ESRCH) {
- break;
- }
- ast_log(LOG_WARNING, "Unable to send a SIGHUP to MOH process?!!: %s\n", strerror(errno));
- }
- usleep(100000);
- if (killpg(class->pid, SIGTERM) < 0) {
- if (errno == ESRCH) {
- break;
- }
- ast_log(LOG_WARNING, "Unable to terminate MOH process?!!: %s\n", strerror(errno));
- }
- usleep(100000);
- if (killpg(class->pid, SIGKILL) < 0) {
- if (errno == ESRCH) {
- break;
- }
- ast_log(LOG_WARNING, "Unable to kill MOH process?!!: %s\n", strerror(errno));
- }
- } while (0);
+ killpid(class->pid, class->kill_delay, class->kill_method);
class->pid = 0;
}
} else {
@@ -1344,6 +1377,7 @@
)) {
class->format = ao2_bump(ast_format_slin);
class->srcfd = -1;
+ class->kill_delay = 100000;
}
return class;
@@ -1613,44 +1647,22 @@
if (class->pid > 1) {
char buff[8192];
- int bytes, tbytes = 0, stime = 0, pid = 0;
+ int bytes, tbytes = 0, stime = 0;
ast_debug(1, "killing %d!\n", class->pid);
stime = time(NULL) + 2;
- pid = class->pid;
- class->pid = 0;
-
- /* Back when this was just mpg123, SIGKILL was fine. Now we need
- * to give the process a reason and time enough to kill off its
- * children. */
- do {
- if (killpg(pid, SIGHUP) < 0) {
- ast_log(LOG_WARNING, "Unable to send a SIGHUP to MOH process?!!: %s\n", strerror(errno));
- }
- usleep(100000);
- if (killpg(pid, SIGTERM) < 0) {
- if (errno == ESRCH) {
- break;
- }
- ast_log(LOG_WARNING, "Unable to terminate MOH process?!!: %s\n", strerror(errno));
- }
- usleep(100000);
- if (killpg(pid, SIGKILL) < 0) {
- if (errno == ESRCH) {
- break;
- }
- ast_log(LOG_WARNING, "Unable to kill MOH process?!!: %s\n", strerror(errno));
- }
- } while (0);
+ killpid(class->pid, class->kill_delay, class->kill_method);
while ((ast_wait_for_input(class->srcfd, 100) > 0) &&
(bytes = read(class->srcfd, buff, 8192)) && time(NULL) < stime) {
tbytes = tbytes + bytes;
}
- ast_debug(1, "mpg123 pid %d and child died after %d bytes read\n", pid, tbytes);
+ ast_debug(1, "mpg123 pid %d and child died after %d bytes read\n",
+ class->pid, tbytes);
+ class->pid = 0;
close(class->srcfd);
class->srcfd = -1;
}
@@ -1769,6 +1781,22 @@
if (!class->format) {
ast_log(LOG_WARNING, "Unknown format '%s' -- defaulting to SLIN\n", var->value);
class->format = ao2_bump(ast_format_slin);
+ }
+ } else if (!strcasecmp(var->name, "kill_escalation_delay")) {
+ if (sscanf(var->value, "%zu", &class->kill_delay) == 1) {
+ class->kill_delay *= 1000;
+ } else {
+ ast_log(LOG_WARNING, "kill_escalation_delay '%s' is invalid. Setting to 100ms\n", var->value);
+ class->kill_delay = 100000;
+ }
+ } else if (!strcasecmp(var->name, "kill_method")) {
+ if (!strcasecmp(var->value, "process")) {
+ class->kill_method = KILL_METHOD_PROCESS;
+ } else if (!strcasecmp(var->value, "process_group")){
+ class->kill_method = KILL_METHOD_PROCESS_GROUP;
+ } else {
+ ast_log(LOG_WARNING, "kill_method '%s' is invalid. Setting to 'process_group'\n", var->value);
+ class->kill_method = KILL_METHOD_PROCESS_GROUP;
}
}
}
@@ -1904,6 +1932,9 @@
ast_cli(a->fd, "\tDirectory: %s\n", S_OR(class->dir, "<none>"));
if (ast_test_flag(class, MOH_CUSTOM)) {
ast_cli(a->fd, "\tApplication: %s\n", S_OR(class->args, "<none>"));
+ ast_cli(a->fd, "\tKill Escalation Delay: %zu ms\n", class->kill_delay / 1000);
+ ast_cli(a->fd, "\tKill Method: %s\n",
+ class->kill_method == KILL_METHOD_PROCESS ? "process" : "process_group");
}
if (strcasecmp(class->mode, "files")) {
ast_cli(a->fd, "\tFormat: %s\n", ast_format_get_name(class->format));
--
To view, visit https://gerrit.asterisk.org/5987
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-Project: asterisk
Gerrit-Branch: certified/13.13
Gerrit-MessageType: merged
Gerrit-Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b
Gerrit-Change-Number: 5987
Gerrit-PatchSet: 3
Gerrit-Owner: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Benjamin Keith Ford <bford at digium.com>
Gerrit-Reviewer: Jenkins2
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: Matthew Fredrickson <creslin at digium.com>
Gerrit-Reviewer: Richard Mudgett <rmudgett at digium.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-code-review/attachments/20170712/982456d2/attachment-0001.html>
More information about the asterisk-code-review
mailing list