[Asterisk-code-review] udptl: Don't eat sequence numbers until OK is received (asterisk[11])
George Joseph
asteriskteam at digium.com
Wed May 18 10:50:45 CDT 2016
George Joseph has uploaded a new change for review.
https://gerrit.asterisk.org/2869
Change subject: udptl: Don't eat sequence numbers until OK is received
......................................................................
udptl: Don't eat sequence numbers until OK is received
Scenario:
Local fax -> Asterisk w/ firewall -> Provider -> Remote fax
* Local fax starts rtp call to remote fax
* Remote fax starts t38 call back to local fax.
* Local fax sends t38 no-signal to Asterisk before sending an OK.
* udptl processes the frame and increments the expected sequence number.
* chan_sip drops the frame because the call isn't up so nothing goes out
the external interface to open the port for incoming packets.
* Local fax sends OK and Asterisk sends OK to the remote fax.
* Remote fax sends t38 packets which are dropped by the firewall.
* Local fax re-sends t38 no-signal with the same sequence number.
* utpdl drops the frame because it thinks it's a dup.
* Still no outgoing packets to open the firewall.
* t38 negotiation fails.
The patch drops frames t38 received before udptl sequence processing
when the call hasn't been answered yet. The second no-signal frame
is then seen as new and is relayed out the external internface which
opens the port and allows negotiation to continue.
ASTERISK-26034 #close
Change-Id: I11744b39748bd2ecbbe8ea84cdb4f3c5943c5af9
---
M main/udptl.c
1 file changed, 12 insertions(+), 0 deletions(-)
git pull ssh://gerrit.asterisk.org:29418/asterisk refs/changes/69/2869/1
diff --git a/main/udptl.c b/main/udptl.c
index d308bff..6307f1d 100644
--- a/main/udptl.c
+++ b/main/udptl.c
@@ -727,6 +727,18 @@
return &ast_null_frame;
}
+ /*
+ * If early media isn't turned on for the channel driver, it's going to
+ * drop this frame. By that time though, udptl has already incremented
+ * the expected sequence number so if the CPE re-sends, the second frame
+ * will be dropped as a dup even through it never went through. So
+ * we drop the frame here if the channel isn't up. 'tag' is set by the
+ * channel drivers on T38_ENABLED or T38_PEER_REINVITE.
+ */
+ if (udptl->tag == NULL) {
+ return &ast_null_frame;
+ }
+
if (udptl->nat) {
/* Send to whoever sent to us */
if (ast_sockaddr_cmp(&udptl->them, &addr)) {
--
To view, visit https://gerrit.asterisk.org/2869
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-MessageType: newchange
Gerrit-Change-Id: I11744b39748bd2ecbbe8ea84cdb4f3c5943c5af9
Gerrit-PatchSet: 1
Gerrit-Project: asterisk
Gerrit-Branch: 11
Gerrit-Owner: George Joseph <gjoseph at digium.com>
More information about the asterisk-code-review
mailing list