[asterisk-bugs] [JIRA] (DAHLIN-182) modprobe.conf opermode= settings per module

[Keith Morgan (JIRA)]

     [ https://issues.asterisk.org/jira/browse/DAHLIN-182?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Keith Morgan closed DAHLIN-182.
-------------------------------

    Resolution: Won't Fix

> modprobe.conf opermode= settings per module
> -------------------------------------------
>
>                 Key: DAHLIN-182
>                 URL: https://issues.asterisk.org/jira/browse/DAHLIN-182
>             Project: DAHDI-Linux
>          Issue Type: Bug
>          Components: wctdm
>            Reporter: comwiz-jp
>
> When using modprobe.conf to specify the opermode= command, it would be nice if you could specify the opermode= per module, instead of what appears to be only globally
> As an example, in the UK I have couple of sites where BT lines and other provider lines are present together, the BT lines are connected to FXO modules with the global opermode=UK switch and the FXO modules show AUTO FXO (UK mode), which is good/correct
> However, the other provider lines are using standard Bell (US) setup and it would be nice to allow modules to be individually configured with a setting that would show AUTO FXO (FCC mode) for modules not connected to BT. etc
> I'm sure other people have this scenario, such as connected to BT and Cable Telcos or BT and a Cellular Gateway, etc
> It would make sense to me at least, if opermode= could be set on a per module basis and/or globally



--
This message was sent by Atlassian JIRA
(v6.2#6252)