[asterisk-bugs] [JIRA] (DAHLIN-329) Support multiple dynamic spans with FIFO

[Keith Morgan (JIRA)]

     [ https://issues.asterisk.org/jira/browse/DAHLIN-329?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Keith Morgan closed DAHLIN-329.
-------------------------------

    Resolution: Won't Fix

> Support multiple dynamic spans with FIFO
> ----------------------------------------
>
>                 Key: DAHLIN-329
>                 URL: https://issues.asterisk.org/jira/browse/DAHLIN-329
>             Project: DAHDI-Linux
>          Issue Type: Improvement
>      Security Level: None
>          Components: dahdi (the module), dahdi_dynamic
>    Affects Versions: 2.7.0
>         Environment: Kernel versions 2.6.24, 2.6.38 and 3.2.0 tested
>            Reporter: Michael Walton
>            Assignee: Russ Meyerriecks
>         Attachments: 2013.12.04_kernel.h.patch, 2013.12.04_pavel_dahdi_dynamic.c.patch, dahdi-base.c.patch, dahdi_dummy.c.patch, dahdi_dynamic.c.patch, dahdi-dynamic-multispan-fifo.patch, kernel.h.patch
>
>
> The dynamic span driver works for one span, but is unable to handle the phase differences caused by line and network jitter and clock drift in a multiple span situation. The introduction of a configurable receive FIFO,  proper master clock priority switching and slip/skip processing solves this problem. Additionally, to support configurations where no telephony hardware is present, the highres timer from (defunct) dahdi_dummy is re-introduced into dahdi base to replace the core timer functionality (which is limited to 250Hz) with a true 1000Hz tick. As with the core timer, this is the fallback timing when no span provides master timing.
> Dynamic multispan introduces:
>  * Configurable fifo on incoming dynamic frames
>  * Master/slave dynamic spans with priority switching based on alarm status
>  * All transmit and receive processing is done in the dahdi_dynamic_run tasklet to ensure proper handling of jitter and phase differences
>  * Unreachable spans (RED alarm) switch to a poll mode to prevent network being flooded by 1ms frames that go nowhere
>  * Slip/skip statistics per span available on /proc/dahdi/dahdi_dynamic_stats
>  * High res timer added to dahdi-base to replace core timer with true 1ms tick timer
>  



--
This message was sent by Atlassian JIRA
(v6.2#6252)