[asterisk-bugs] [JIRA] (ASTERISK-28446) Asterisk NOTIFY NOT_INUSE and UNAVAILABLE both send same XML dialog <state>terminated</state>

[Joshua C. Colp (JIRA)]

     [ https://issues.asterisk.org/jira/browse/ASTERISK-28446?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Joshua C. Colp updated ASTERISK-28446:
--------------------------------------

    Status: Open  (was: Triage)

> Asterisk NOTIFY NOT_INUSE and UNAVAILABLE both send same XML dialog <state>terminated</state>
> ---------------------------------------------------------------------------------------------
>
>                 Key: ASTERISK-28446
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-28446
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: Channels/chan_sip/Interoperability
>    Affects Versions: 13.27.0
>            Reporter: David Brillert
>
> I confirmed the bad behavior with Yealink product management.
> A Yealink phone configured to subscribe to asterisk hint for devstate will not change the BLF light correctly.
> Yealink supports:
> BLF = Green/NOT_INUSE
> BLF= OFF/UNAVAILABLE
> But the lights don't function in the desired manner because Asterisk sends the same XML dialog  <state>terminated</state> for both device states. So the Yealink and all other vendors result in:
> BLF = Green/NOT_INUSE
> BLF= Green/UNAVAILABLE
> Here is the bit of Asterisk source code responsible for the problem:
> Asterisk source code:
> if (data->state & AST_EXTENSION_RINGING && sip_cfg.notifyringing) {
>                        ast_str_append(tmp, 0, "<state>early</state>\n");
>                } else if (data->state & (AST_EXTENSION_RINGING | AST_EXTENSION_INUSE | AST_EXTENSION_BUSY |
>                                          AST_EXTENSION_ONHOLD) || data->presence_state == AST_PRESENCE_DND) {
>                        ast_str_append(tmp, 0, "<state>confirmed</state>\n");
>                } else {
>                        ast_str_append(tmp, 0, "<state>terminated</state>\n");
>                }
>  
> This is from chan_sip
> So Asterisk always sends terminated if state is "UNAVAILABLE" and by the same if statement "IDLE" will also result in XML <state>terminated</state>
> Yealink expects to see a 480 temporarily unavailable response for UNAVAILABLE
> Here is a summary of XML responses by devstate from Asterisk 13.27
> RINGING <state>early</state>
> ONHOLD <state>confirmed</state>
> BUSY <state>confirmed</state>
> UNAVAILABLE <state>terminated</state>
> NOT_INUSE <state>terminated</state>



--
This message was sent by Atlassian JIRA
(v6.2#6252)