[asterisk-bugs] [JIRA] (ASTERISK-27881) PBX calls via chan_sip TCP trunk now get authentification error

[Richard Mudgett (JIRA)]

    [ https://issues.asterisk.org/jira/browse/ASTERISK-27881?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=243600#comment-243600 ] 

Richard Mudgett commented on ASTERISK-27881:
--------------------------------------------

Thank you for taking the time to report this bug and helping to make Asterisk better. Unfortunately, we cannot work on this bug because your description did not include enough information. Please read over the Asterisk Issue Guidelines [1] which discusses the information necessary for your issue to be resolved and the format that information needs to be in. We would be grateful if you would then provide a more complete description of the problem. At a minimum, we need:

1. The specific steps or actions you took that caused you to encounter the problem.
2. The behavior you expected and the location of documentation that led you to that expectation.
3. The behavior you actually encountered.

To demonstrate the issue in detail, please include Asterisk log files generated per the instructions on the wiki [2]. If applicable, please ensure that protocol-level trace debugging is enabled, e.g., 'sip set debug on' if the issue involves chan_sip, and configuration information such as dialplan and channel configuration.

Thanks!

[1] https://wiki.asterisk.org/wiki/display/AST/Asterisk+Issue+Guidelines

[2] https://wiki.asterisk.org/wiki/display/AST/Collecting+Debug+Information



> PBX calls via chan_sip TCP trunk now get authentification error
> ---------------------------------------------------------------
>
>                 Key: ASTERISK-27881
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-27881
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: Channels/chan_sip/TCP-TLS
>    Affects Versions: 13.21.0
>         Environment: Ubuntu 16.04
>            Reporter: Ian Gilmour
>
> I have a PBX (type=peer) with a few extensions that forwards calls on to an Asterisk and from there the calls get routed to an external server. All worked fine with 13.20.0 but after upgrading to 13.21.0 I now see the call being rejected by Asterisk with authentification failures.
> The PBX doesn't register with Asterisk - calls are accepted because they come from the defined PBX host IP address. The port the call originates from does not match the defined PBX port (it didn't when using 13.20.0 either and that worked fine).
> I tried adding "insecure=port,invite" to the PBX trunk config with no effect.
> The change in behaviour between 13.20 and 13.21 looks to be related to mods made for ASTERISK-27457.



--
This message was sent by Atlassian JIRA
(v6.2#6252)