[asterisk-bugs] [JIRA] (ASTERISK-27649) asterisk trunks showing wrong caller id

[Asterisk Team (JIRA)]

    [ https://issues.asterisk.org/jira/browse/ASTERISK-27649?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=241947#comment-241947 ] 

Asterisk Team commented on ASTERISK-27649:
------------------------------------------

Thanks for creating a report! The issue has entered the triage process. That means the issue will wait in this status until a Bug Marshal has an opportunity to review the issue. Once the issue has been reviewed you will receive comments regarding the next steps towards resolution.

A good first step is for you to review the [Asterisk Issue Guidelines|https://wiki.asterisk.org/wiki/display/AST/Asterisk+Issue+Guidelines] if you haven't already. The guidelines detail what is expected from an Asterisk issue report.

Then, if you are submitting a patch, please review the [Patch Contribution Process|https://wiki.asterisk.org/wiki/display/AST/Patch+Contribution+Process].

> asterisk trunks showing wrong caller id
> ---------------------------------------
>
>                 Key: ASTERISK-27649
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-27649
>             Project: Asterisk
>          Issue Type: Information Request
>      Security Level: None
>          Components: . I did not set the category correctly.
>    Affects Versions: 11.25.3
>         Environment: Asterisk under elastix , 
>            Reporter: Diego Diaz
>            Severity: Critical
>
> hello people i have problem with showing the right caller id for my IAXTRUNKS , i created two Iax2 trunks and i redirect the outgoing calls of each trunk trough only one sip trunk , but i configured my Dialplan with a different context for each iax trunk to display a different caller id in every outgoing call of those trunks , the thing here is both outgoing calls of these trunks display the same caller id  
> here is my dialplan
> [ Context 'from-s02' created by 'pbx_config' ]
>   '_3XXXXXXXXX' =>  1. Set(CALLERID(num)=1443078)                [pbx_config]
>                     2. Dial(SIP/une/03${EXTEN})                   [pbx_config]
>                     3. Congestion()                               [pbx_config]
>                     102. Busy()                                   [pbx_config]
>   '_NZXXXXXX' =>    1. Set(CALLERID(num)=14430678)                [pbx_config]
>                     2. Dial(SIP/une/05${EXTEN})                   [pbx_config]
>                     3. Congestion()                               [pbx_config]
>                     102. Busy()                                   [pbx_config]
>   '_ZXXXXXX' =>     1. Set(CALLERID(num)=1443078)                [pbx_config]
>                     2. Set(CALLERID(name)=14430678)               [pbx_config]
>                     3. Noop(************** ${CALLERID(all)} ****************) [pbx_config]
>                     4. Dial(SIP/une/${EXTEN})                     [pbx_config]
>                     5. Congestion()                               [pbx_config]
>                     104. Busy()                                   [pbx_config]
> -= 3 extensions (14 priorities) in 1 context. =-
> IPPBX*CLI> dialplan show from-s00
> [ Context 'from-s00' created by 'pbx_config' ]
>   '_3XXXXXXXXX' =>  1. Set(CALLERID(all)=1443072)                [pbx_config]
>                     2. Dial(SIP/une/03${EXTEN})                   [pbx_config]
>                     3. Congestion()                               [pbx_config]
>                     102. Busy()                                   [pbx_config]
>   '_NZXXXXXX' =>    1. Set(CALLERID(all)=1443072)                [pbx_config]
>                     2. Dial(SIP/une/05${EXTEN})                   [pbx_config]
>                     3. Congestion()                               [pbx_config]
>                     102. Busy()                                   [pbx_config]
>   '_ZXXXXXX' =>     1. Set(CALLERID(all)=1443072)                [pbx_config]
>                     2. Set(CALLERID(name)=1443072)               [pbx_config]
>                     3. Noop(************** ${CALLERID(all)} ****************) [pbx_config]
>                     4. Dial(SIP/une/${EXTEN})                     [pbx_config]
>                     5. Congestion()                               [pbx_config]
>                     104. Busy()                                   [pbx_config]
> you see , the caller id is different in every context , that is defined in the trunks  
> rusiax]
> disallow=all
> context=from-s00
> type=friend
> qualify=yes
> allow=ulaw
> allow= alaw
> host=so.rusipbx.com
> [t_so02]
> disallow=all
> context=from-s02
> type=friend
> qualify=yes
> allow=ulaw
> allow= alaw
> host=rusipbx.com
> i want to know how to make each iax trunk shows its own caller id _???



--
This message was sent by Atlassian JIRA
(v6.2#6252)