[asterisk-bugs] [JIRA] (ASTERISK-27027) chan_sip: Channel Stuck when load reach to 500+

[Bhavik (JIRA)]

     [ https://issues.asterisk.org/jira/browse/ASTERISK-27027?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Bhavik updated ASTERISK-27027:
------------------------------

    Attachment: core-show-locks.txt

This is lock file.

> chan_sip: Channel Stuck when load reach to 500+
> -----------------------------------------------
>
>                 Key: ASTERISK-27027
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-27027
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: Channels/chan_sip/General
>    Affects Versions: 13.13.1, 13.15.0
>         Environment: operating system : Centos 7 64 Bit
> [root at localhost ~]# lscpu
> Architecture:          x86_64
> CPU op-mode(s):        32-bit, 64-bit
> Byte Order:            Little Endian
> CPU(s):                1
> On-line CPU(s) list:   0
> Thread(s) per core:    1
> Core(s) per socket:    1
> Socket(s):             1
> NUMA node(s):          1
> Vendor ID:             GenuineIntel
> CPU family:            6
> Model:                 94
> Model name:            Intel(R) Xeon(R) CPU E3-1230 v5 @ 3.40GHz
> Stepping:              3
> CPU MHz:               3407.463
> BogoMIPS:              6816.00
> Hypervisor vendor:     VMware
> Virtualization type:   full
> L1d cache:             32K
> L1i cache:             32K
> L2 cache:              256K
> L3 cache:              8192K
> NUMA node0 CPU(s):     0
> RAM : 50GB
> Hard Disk : 800GB
>            Reporter: Bhavik
>            Assignee: Unassigned
>         Attachments: backtrace-threads.txt, core-show-locks.txt
>
>
> When we increase load 300 calls to 500 calls , call will stuck around 50%.
> We have created a simple Dialplan like.
> [IVR]
> exten =>_X.,1,NoOp(IVR Start)
> exten =>_X.,n,Answer()
> exten =>_X.,n,Wait(1)
> exten =>_X.,n,Agi(ivr.php,1)
> I was added h extension but i tried with remove h extension as well.
> In my ivr.php File just have getting  channel variables and playing an audio file.Thats it.
> We have tested like send call via WINSIP dialer to load 500 call to specifc number and playing audio file vai AGI file.
> after couple of minutes, we hangup all calls from WINSIP Dialer Side,around 50% call drop correctly but remaining calls are stuck and showing last message like : Rx: BYE
> but channel showing still active.
> Also every 20 sec around getting below warning as well.
> [May 30 05:53:07] WARNING[24117]: chan_sip.c:4335 __sip_autodestruct: Autodestruct on dialog '70b2-09686995-0001-Call898' with owner SIP/XXXXXXX in place (Method: BYE). Rescheduling destruction for 10000 ms
> [May 30 05:53:07] WARNING[24117]: chan_sip.c:4335 __sip_autodestruct: Autodestruct on dialog '143c-09566665-0001-Call418' with owner SIP/XXXXX in place (Method: BYE). Rescheduling destruction for 10000 ms
> After call stuck, it



--
This message was sent by Atlassian JIRA
(v6.2#6252)