[asterisk-bugs] [JIRA] (ASTERISK-26924) Codec OPUS bad quality

[Asterisk Team (JIRA)]

    [ https://issues.asterisk.org/jira/browse/ASTERISK-26924?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=236399#comment-236399 ] 

Asterisk Team commented on ASTERISK-26924:
------------------------------------------

Thanks for creating a report! The issue has entered the triage process. That means the issue will wait in this status until a Bug Marshal has an opportunity to review the issue. Once the issue has been reviewed you will receive comments regarding the next steps towards resolution.

A good first step is for you to review the [Asterisk Issue Guidelines|https://wiki.asterisk.org/wiki/display/AST/Asterisk+Issue+Guidelines] if you haven't already. The guidelines detail what is expected from an Asterisk issue report.

Then, if you are submitting a patch, please review the [Patch Contribution Process|https://wiki.asterisk.org/wiki/display/AST/Patch+Contribution+Process].

> Codec OPUS bad quality
> ----------------------
>
>                 Key: ASTERISK-26924
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-26924
>             Project: Asterisk
>          Issue Type: Improvement
>      Security Level: None
>          Components: Codecs/codec_opus
>         Environment: Ubuntu 16.04 i386/x86_64
>            Reporter: TSAREGORODTSEV Yury
>
> Codec OPUS developed by Digium doesn't provide same good quality as open source version in case of packet losses, delays.
> After comparing recorded degraded media with original sample using PESQ results shows average predicted MOS of Digium Opus almost twice less then open source.
> How to reproduce issue:
> 1. Environment: ubuntu 16.04
> 2. Libopus latest stable release 1.1.4 (compiled from sources).
> 3. Asterisk 13.14.0
> 4. Channel driver: chan_sip
> 5. Configure 2 asterisk hosts, where 1st host origination side, 2nd host termination side.
> 6. Configure dialplan: on 1st host Dialplan with AppMonitor
> 7. Configure dialplan: on 2nd host Playback any wave file (8000, 16bit).
> 8. Opus config on both:
> [opus]
> type=opus
> packet_loss=40
> max_playback_rate=48000
> bitrate=24000
> cbr=0
> fec=1
> 9. Compile ITU-T PESQ utility from
> https://github.com/dennisguse/ITU-T_pesq
> 10. Simulate packet loss/delays on 2nd host with
>     tc qdisc add dev eth0 root netem loss 20% delay 100ms 20ms distribution normal
> 11. Compare recorded degraded media (only incoming channel of course) with original:
> ./itu-t-pesq2005 +8000 original.wav recorded.wav



--
This message was sent by Atlassian JIRA
(v6.2#6252)