[asterisk-bugs] [JIRA] (ASTERISK-26535) Asterisk won't start after 13.12.1 update

[Anton Bulatov (JIRA)]

    [ https://issues.asterisk.org/jira/browse/ASTERISK-26535?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=233294#comment-233294 ] 

Anton Bulatov edited comment on ASTERISK-26535 at 11/2/16 1:39 AM:
-------------------------------------------------------------------

Sorry, boot failure was connected with lua port conflict, I had two versions installed (lua51 and lua52), after leaving lua51 only asterisk boots and works fine except for the message about EID, it is still showing up every time i execute 'asterisk' command.

Here's my ifconfig:
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
        ether 68:05:ca:1e:26:1e
        inet6 fe80::6a05:caff:fe1e:261e%em0 prefixlen 64 scopeid 0x1 
        inet6 xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 autoconf 
        inet xxx.xxx.xxx.xxx netmask 0xffffff00 broadcast xxx.xxx.xxx.xxx 
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
igb0: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=6403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether d0:50:99:53:4f:78
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=6403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether d0:50:99:53:4f:79
        inet xxx.xxx.xxx.xxx netmask 0xffffff00 broadcast xxx.xxx.xxx.xxx 
        inet6 fe80::d250:99ff:fe53:4f79%igb1 prefixlen 64 scopeid 0x3 
        inet6 xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 
        inet 127.0.0.1 netmask 0xff000000 
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo 
lo1: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 
        inet6 xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo 
gre0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1476
        options=80000<LINKSTATE>
        tunnel inet xxx.xxx.xxx.xxx --> xxx.xxx.xxx.xxx
        inet xxx.xxx.xxx.xxx --> xxx.xxx.xxx.xxx  netmask 0xfffffffc 
        nd6 options=69<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL,NO_RADR>
        groups: gre 


was (Author: keenan):
Sorry, boot failure was connected with lua port conflict, I had two versions installed (lua51 and lua52), after leaving lua51 only asterisk boots and works fine except for the message about EID, it is still showing up every time i execute 'asterisk' command.

> Asterisk won't start after 13.12.1 update
> -----------------------------------------
>
>                 Key: ASTERISK-26535
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-26535
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: Channels/chan_pjsip
>    Affects Versions: 13.12.1
>         Environment: FreeBSD 11 amd64
>            Reporter: Anton Bulatov
>            Assignee: Unassigned
>
> After upgrading to version 13.12.1 asterisk refuses to start saying "No ethernet interface found for seeding global EID. You will have to set it manually."



--
This message was sent by Atlassian JIRA
(v6.2#6252)