[asterisk-bugs] [JIRA] (DAHTOOL-73) /etc/init.d/dahd.d not found version 2.11

[Shaun Ruffell (JIRA)]

    [ https://issues.asterisk.org/jira/browse/DAHTOOL-73?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=229815#comment-229815 ] 

Shaun Ruffell commented on DAHTOOL-73:
--------------------------------------

I spoke about this with [~wthompson], and it appears that there may have been an inadvertent change in 2.11.0.  Specifically, the {{make config}} target in dahdi-tools doesn't do anything anymore but was changed to {{make install-config}}.  

So...in the interim, do if you go to the tools directory and run {{make install-config}} do you then get the behavior you expect?

> /etc/init.d/dahd.d not found  version 2.11
> ------------------------------------------
>
>                 Key: DAHTOOL-73
>                 URL: https://issues.asterisk.org/jira/browse/DAHTOOL-73
>             Project: DAHDI-Tools
>          Issue Type: Bug
>      Security Level: None
>          Components: General
>    Affects Versions: 2.10.0
>         Environment: CentOS 6.7
> Dual Core Atom D2500 1.8Ghz
>            Reporter: Trent Creekmore
>            Assignee: Wendell Thompson
>            Severity: Blocker
>
> Obtained dahdi-linux-complete-2.11.0+2.11.0 via...
> http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
> Then entered the following commands:
>     make
>     make install
>     make config
> Completes without any errors.
> Then I enter  "service dahdi start" which returns:
> "dahdi: unrecognized service"
> Also try "/etc/init.d/dahd.d" which returns:
> "-bash: /etc/init.d/dahd.d: No such file or directory"
> I also tried following the steps at https://wiki.asterisk.org/wiki/display/DAHDI/Quick+Start+From+Source
> No errors in the steps, then I get to this point:
> "cat /etc/dahdi/modules" which shows:
>     Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) on Tue Feb 23 12:55:53 2016
>     If you edit this file and execute /usr/sbin/dahdi_genconf again, your manual change
>     wanpipe
> However once I get to the "dahdi_genconf system"
> I get : "Empty configuration -- no spans"
> After completion:
>   "service dahdi start" &  "/etc/init.d/dahd.d" returns the same as above



--
This message was sent by Atlassian JIRA
(v6.2#6252)