[asterisk-bugs] [JIRA] (PRI-181) Pri span2

[Richard Mudgett (JIRA)]

    [ https://issues.asterisk.org/jira/browse/PRI-181?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=229511#comment-229511 ] 

Richard Mudgett commented on PRI-181:
-------------------------------------

{quote}
[Feb 15 22:54:26] ERROR[9556]: chan_dahdi.c:14966 dahdi_pri_error: PRI Span: 2 Unable to receive TEI from network in state 2(Assign awaiting TEI)!
{quote}
Your box tried to obtain a dynamic TEI from the connected ISDN switch but could not get one.  This shows a configuration incompatibility with the connected ISDN switch.

{quote}
when i change signalling=bri_cpe_ptmp to signalling=bri_cpe_ptp start work incoming and outgoing calls
{quote}
I think you meant {{bri_cpe}} instead of {{bri_cpe_ptp}} here.  This is likely your problem.  The {{bri_cpe_ptmp}} and {{bri_cpe}} signalling modes are mutually exclusive in libpri and is configurable per span.  The {{bri_cpe_ptmp}} mode uses dynamic TEI assignments to identify what device is being referenced.  The {{bri_cpe}} mode uses the point-to-point TEI of zero for communication.

You have yet to demonstrate a bug in either Asterisk or libpri.  You have shown that your problem is likely a configuration error which is not the purpose of the bug tracker.

Please see the Asterisk Issue Guidelines [1] for instruction on the intended use of the Asterisk issue tracker.

[1] https://wiki.asterisk.org/wiki/display/AST/Asterisk+Issue+Guidelines

> Pri span2
> ---------
>
>                 Key: PRI-181
>                 URL: https://issues.asterisk.org/jira/browse/PRI-181
>             Project: LibPRI
>          Issue Type: Bug
>      Security Level: None
>          Components: General, NewFeature
>         Environment: I use centos 6.7 
>            Reporter: Paulo Batista
>            Assignee: Richard Mudgett
>
> Hi ,
> I use asterisk11.18.0  dahdi-2.10.2 libpri-1.4.14 with sangoma cards A200 , A500 and w400 -gsm 
>  I have two  telcos connected  A500 the span1 works very well  ,but the  problem is on span2  same times i can not make inbound or outbound calls
> i thing the problem is in sinchronism .
>  
>  



--
This message was sent by Atlassian JIRA
(v6.2#6252)