[asterisk-bugs] [JIRA] (ASTERISK-25079) When bridging 2 channels MOH does not stop on one channel

[Rusty Newton (JIRA)]

     [ https://issues.asterisk.org/jira/browse/ASTERISK-25079?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Rusty Newton updated ASTERISK-25079:
------------------------------------

    Summary: When bridging 2 channels MOH does not stop on one channel  (was: When bridging 2 channels moh does not stop on one channel)

> When bridging 2 channels MOH does not stop on one channel
> ---------------------------------------------------------
>
>                 Key: ASTERISK-25079
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-25079
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>    Affects Versions: 13.3.2
>            Reporter: Zane Conkle
>
> There is an issue with MOH not stopping when bridging channels. 
> Lets assume PJSIP/205 is me. Steps to reproduce:
> PJSIP/205 Answers inbound call
> PJSIP/205 dials PJSIP/200 -> inbound call is placed on hold
> via AMI:
> {code}
> Action: Bridge
> ActionID: 1234
> Channel1: SIP/carrier-000000be
> Channel2: PJSIP/200-00000100
> Tone: no
> {code}
> The SIP/carrier channel still has hold music playing. I have tried this with PJSIP/PJSIP and SIP/PJSIP combinations and the issue happens both ways. I was thinking for a while it may have been due to mixing the technologies. One thing I have noticed is every so often the bridge will work. I cant find out what causes it.. It seems to be when I have the call held for an extended period of time before bridging. Also, if I set tone to "Both" the MOH will stop after the beep but you cannot hear the other party. There is a similar issue that was closed earlier this year reporting the same thing. I am not sure if this is a regression or if it was just assumed fixed.



--
This message was sent by Atlassian JIRA
(v6.2#6252)