[asterisk-bugs] [JIRA] (ASTERISK-25079) When bridging 2 channels moh does not stop on one channel

[Zane Conkle (JIRA)]

Zane Conkle created ASTERISK-25079:
--------------------------------------

             Summary: When bridging 2 channels moh does not stop on one channel
                 Key: ASTERISK-25079
                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-25079
             Project: Asterisk
          Issue Type: Bug
      Security Level: None
    Affects Versions: 13.3.2
            Reporter: Zane Conkle


There is an issue with MOH not stopping when bridging channels. 

Lets assume PJSIP/205 is me. Steps to reproduce:

PJSIP/205 dials <ten digit number>
PJSIP/205 dials PJSIP/200 -> <ten digit number> is placed on hold

via AMI:
{code}
Action: Bridge
ActionID: 1234
Channel1: SIP/carrier-000000be
Channel2: PJSIP/200-00000100
Tone: no
{code}

The SIP/carrier channel still has hold music playing. I have tried this with PJSIP/PJSIP and SIP/PJSIP combinations and the issue happens both ways. I was thinking for a while it may have been due to mixing the technologies. One thing I have noticed is every so often the bridge will work. I cant find out what causes it.. It seems to be when I have the call held for an extended period of time before bridging. Also, if I set tone to "Both" the MOH will stop after the beep but you cannot hear the other party. There is a similar issue that was closed earlier this year reporting the same thing. I am not sure if this is a regression or if it was just assumed fixed.



--
This message was sent by Atlassian JIRA
(v6.2#6252)