[asterisk-bugs] [JIRA] (ASTERISK-24908) UUI sent from Avaya to Asterisk over ISDN

[Cyril CONSTANTIN (JIRA)]

     [ https://issues.asterisk.org/jira/browse/ASTERISK-24908?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Cyril CONSTANTIN updated ASTERISK-24908:
----------------------------------------

    Attachment: Avaya MST traces without forcing on Asterisk.txt
                Asterisk console logs without forcing.txt
                UUI receives by Avaya then I try to force UUI on Asterisk.txt

In attachment you have three traces, the first two traces are traces made from Asterisk + Avaya where I don't force UUI on Asterisk, I just need to forward call to 53708 (call is trombone through same ISDN link) so I was expecting that Asterisk will keep this UUI and pass it back to Avaya.

As you'll see there is no UUI field in SETUP while calling 53708.


Third traces I force UUI on Asterisk I try to set a fake UUI (8888888888) on Asterisk and expect to send it to Avaya by Dialing 53708 but nothing is send in SETUP message.

Best Regards


> UUI sent from Avaya to Asterisk over ISDN
> -----------------------------------------
>
>                 Key: ASTERISK-24908
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-24908
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: Channels/chan_dahdi
>    Affects Versions: 11.16.0
>            Reporter: Cyril CONSTANTIN
>            Severity: Minor
>         Attachments: Asterisk console logs without forcing.txt, Avaya MST traces without forcing on Asterisk.txt, UUI receives by Avaya then I try to force UUI on Asterisk.txt
>
>
> Hi,
> I'm trying to pass UUI from Avaya to Asterisk, while using pri debug I'm able to see my UUI sent to Asterisk, but on Asterisk I'm not able to display it with DumpChan or with NoOp USERUSERINFO. It looks that UUI isn't decoded properly to be displayed by Asterisk.
> My current call flow is to get Avaya call through ISDN link to Asterisk then make some check on CLI and with Dial command connect back on Avaya through same ISDN link, so Asterisk works as a gatekeeper, so I would like to keep the UUI generated by Avaya when going through Asterisk and forward it to Avaya.
> I also tried to force the UUI on Asterisk with(Set(__USERUSERINFO=8888888888)) in order to see if I was able to see it on Avaya CTI server but unfortunately it doesn't look to be sent by Asterisk.
> Thanks a lot for your help
> Best Regards



--
This message was sent by Atlassian JIRA
(v6.2#6252)