[asterisk-bugs] [JIRA] (ASTERISK-24837) rtp transmission error and severe handle leak
Rusty Newton (JIRA)
noreply at issues.asterisk.org
Fri Feb 27 06:41:34 CST 2015
[ https://issues.asterisk.org/jira/browse/ASTERISK-24837?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Rusty Newton updated ASTERISK-24837:
------------------------------------
Description:
[Edit by Rusty - Please use the wiki formatting available to make reports easy to read - I'm going to clean this up for now.]
When I originate several hundred calls using a call file, no dialplan, using app Echo() or app MusicOnHold, the calls connect, but when the other side starts to send media, after some 200+ calls I get several errors:
{noformat}
"ERROR[2433] res_rtp_asterisk.c: RTCP SR transmission error to 208.78.162.174:34443, rtcp halted Operation not permitted"
{noformat}
and the handle count explodes, measured at the end
{noformat}
lsof | grep asterisk | grep FIFO | wc -l
1025046
{noformat}
yes one million and change. The handle count never decreases as long as the channels are open. There are no active calls, only 500 channels.
The call files are all identical:
{noformat}
Channel: SIP/0000000000 at demo
CallerID: "0000000000" <>
WaitTime: 45
MaxRetries: 0
RetryTime: 0
Application: Echo
Data:
Archive: no
{noformat}
where demo is a simple peer like this
{noformat}
[demo]
host=xxx.xxx.xxx.xx
type=peer
insecure=port,invite
context=reject
disallow=all
allow=ulaw
allow=g729
session-timers=accept
port=5060
faxdetect=no
transport=udp
directmedia=yes
{noformat}
*Note 1:* the caller ID may vary call by call it makes no difference. The issue here is the very high handle count, which slows down and kills the machine, and the errors which show that many calls do not connect.
*Note 2:* The calls do no across the internet, they go to a local box.
I need to send as many calls in real life, with media, so this is a killer for my business model.
If I set up debug=10 and verbose=20, I get thousands of lines identical like this ones
{noformat}
Feb 26 23:47:13] DEBUG[2433]: acl.c:963 ast_find_ourip: Attached to given IP address
[Feb 26 23:47:13] DEBUG[5763]: res_rtp_asterisk.c:3958 ast_rtcp_read: Got RTCP report of 64 bytes
[Feb 26 23:47:13] DEBUG[5763]: acl.c:958 ast_find_ourip: Not an IPv4 nor IPv6 address, cannot get port.
[Feb 26 23:47:13] DEBUG[5763]: netsock2.c:172 ast_sockaddr_split_hostport: Splitting 'dasaro' into...
[Feb 26 23:47:13] DEBUG[5763]: netsock2.c:226 ast_sockaddr_split_hostport: ...host 'dasaro' and port ''.
[Feb 26 23:47:13] DEBUG[5763]: acl.c:958 ast_find_ourip: Not an IPv4 nor IPv6 address, cannot get port.
[Feb 26 23:47:13] DEBUG[5763]: acl.c:963 ast_find_ourip: Attached to given IP address
{noformat}
{noformat}
ulimit -a
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 0
file size (blocks, -f) unlimited
pending signals (-i) 1048576
max locked memory (kbytes, -l) unlimited
max memory size (kbytes, -m) unlimited
open files (-n) 1048576
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) unlimited
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
{noformat}
*Note 3:* Please note how the handles start to grow with each additional call
{noformat}
Count idle
46
1 call
lsof | grep asterisk | grep FIFO | wc -l
104
2 calls
lsof | grep asterisk | grep FIFO | wc -l
168
3 calls
lsof | grep asterisk | grep FIFO | wc -l
240
4 calls
lsof | grep asterisk | grep FIFO | wc -l
320
{noformat}
As you can see, the handles do not grow linearly, but close to exponentially.
was:
When I originate several hundred calls using a call file, no dialplan, using app Echo() or app MusicOnHold, the calls connect, but when the other side starts to send media, after some 200+ calls I get several errors:
"ERROR[2433] res_rtp_asterisk.c: RTCP SR transmission error to 208.78.162.174:34443, rtcp halted Operation not permitted"
and the handle count explodes, measured at the end
lsof | grep asterisk | grep FIFO | wc -l
1025046
yes one million and change. The handle count never decreases as long as the channels are open. There are no active calls, only 500 channels.
The call files are all identical:
Channel: SIP/0000000000 at demo
CallerID: "0000000000" <>
WaitTime: 45
MaxRetries: 0
RetryTime: 0
Application: Echo
Data:
Archive: no
where demo is a simple peer like this
[demo]
host=xxx.xxx.xxx.xx
type=peer
insecure=port,invite
context=reject
disallow=all
allow=ulaw
allow=g729
session-timers=accept
port=5060
faxdetect=no
transport=udp
directmedia=yes
Note 1: the caller ID may vary call by call it makes no difference. The issue here is the very high handle count, which slows down and kills the machine, and the errors which show that many calls do not connect.
Note 2: The calls do no across the internet, they go to a local box.
I need to send as many calls in real life, with media, so this is a killer for my business model.
If I set up debug=10 and verbose=20, I get thousands of lines identical like this ones
Feb 26 23:47:13] DEBUG[2433]: acl.c:963 ast_find_ourip: Attached to given IP address
[Feb 26 23:47:13] DEBUG[5763]: res_rtp_asterisk.c:3958 ast_rtcp_read: Got RTCP report of 64 bytes
[Feb 26 23:47:13] DEBUG[5763]: acl.c:958 ast_find_ourip: Not an IPv4 nor IPv6 address, cannot get port.
[Feb 26 23:47:13] DEBUG[5763]: netsock2.c:172 ast_sockaddr_split_hostport: Splitting 'dasaro' into...
[Feb 26 23:47:13] DEBUG[5763]: netsock2.c:226 ast_sockaddr_split_hostport: ...host 'dasaro' and port ''.
[Feb 26 23:47:13] DEBUG[5763]: acl.c:958 ast_find_ourip: Not an IPv4 nor IPv6 address, cannot get port.
[Feb 26 23:47:13] DEBUG[5763]: acl.c:963 ast_find_ourip: Attached to given IP address
ulimit -a
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 0
file size (blocks, -f) unlimited
pending signals (-i) 1048576
max locked memory (kbytes, -l) unlimited
max memory size (kbytes, -m) unlimited
open files (-n) 1048576
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) unlimited
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
Note 3: Please note how the handles start to grow with each additional call
Count idle
46
1 call
lsof | grep asterisk | grep FIFO | wc -l
104
2 calls
lsof | grep asterisk | grep FIFO | wc -l
168
3 calls
lsof | grep asterisk | grep FIFO | wc -l
240
4 calls
lsof | grep asterisk | grep FIFO | wc -l
320
As you can see, the handles do not grow linearly, but close to exponentially.
> rtp transmission error and severe handle leak
> ---------------------------------------------
>
> Key: ASTERISK-24837
> URL: https://issues.asterisk.org/jira/browse/ASTERISK-24837
> Project: Asterisk
> Issue Type: Bug
> Security Level: None
> Components: Resources/res_rtp_asterisk
> Affects Versions: 13.2.0
> Environment: Linux 64
> Reporter: Private Name
>
> [Edit by Rusty - Please use the wiki formatting available to make reports easy to read - I'm going to clean this up for now.]
> When I originate several hundred calls using a call file, no dialplan, using app Echo() or app MusicOnHold, the calls connect, but when the other side starts to send media, after some 200+ calls I get several errors:
> {noformat}
> "ERROR[2433] res_rtp_asterisk.c: RTCP SR transmission error to 208.78.162.174:34443, rtcp halted Operation not permitted"
> {noformat}
> and the handle count explodes, measured at the end
> {noformat}
> lsof | grep asterisk | grep FIFO | wc -l
> 1025046
> {noformat}
> yes one million and change. The handle count never decreases as long as the channels are open. There are no active calls, only 500 channels.
> The call files are all identical:
> {noformat}
> Channel: SIP/0000000000 at demo
> CallerID: "0000000000" <>
> WaitTime: 45
> MaxRetries: 0
> RetryTime: 0
> Application: Echo
> Data:
> Archive: no
> {noformat}
> where demo is a simple peer like this
> {noformat}
> [demo]
> host=xxx.xxx.xxx.xx
> type=peer
> insecure=port,invite
> context=reject
> disallow=all
> allow=ulaw
> allow=g729
> session-timers=accept
> port=5060
> faxdetect=no
> transport=udp
> directmedia=yes
> {noformat}
> *Note 1:* the caller ID may vary call by call it makes no difference. The issue here is the very high handle count, which slows down and kills the machine, and the errors which show that many calls do not connect.
> *Note 2:* The calls do no across the internet, they go to a local box.
> I need to send as many calls in real life, with media, so this is a killer for my business model.
> If I set up debug=10 and verbose=20, I get thousands of lines identical like this ones
> {noformat}
> Feb 26 23:47:13] DEBUG[2433]: acl.c:963 ast_find_ourip: Attached to given IP address
> [Feb 26 23:47:13] DEBUG[5763]: res_rtp_asterisk.c:3958 ast_rtcp_read: Got RTCP report of 64 bytes
> [Feb 26 23:47:13] DEBUG[5763]: acl.c:958 ast_find_ourip: Not an IPv4 nor IPv6 address, cannot get port.
> [Feb 26 23:47:13] DEBUG[5763]: netsock2.c:172 ast_sockaddr_split_hostport: Splitting 'dasaro' into...
> [Feb 26 23:47:13] DEBUG[5763]: netsock2.c:226 ast_sockaddr_split_hostport: ...host 'dasaro' and port ''.
> [Feb 26 23:47:13] DEBUG[5763]: acl.c:958 ast_find_ourip: Not an IPv4 nor IPv6 address, cannot get port.
> [Feb 26 23:47:13] DEBUG[5763]: acl.c:963 ast_find_ourip: Attached to given IP address
> {noformat}
> {noformat}
> ulimit -a
> core file size (blocks, -c) unlimited
> data seg size (kbytes, -d) unlimited
> scheduling priority (-e) 0
> file size (blocks, -f) unlimited
> pending signals (-i) 1048576
> max locked memory (kbytes, -l) unlimited
> max memory size (kbytes, -m) unlimited
> open files (-n) 1048576
> pipe size (512 bytes, -p) 8
> POSIX message queues (bytes, -q) 819200
> real-time priority (-r) 0
> stack size (kbytes, -s) 8192
> cpu time (seconds, -t) unlimited
> max user processes (-u) unlimited
> virtual memory (kbytes, -v) unlimited
> file locks (-x) unlimited
> {noformat}
> *Note 3:* Please note how the handles start to grow with each additional call
> {noformat}
> Count idle
> 46
> 1 call
> lsof | grep asterisk | grep FIFO | wc -l
> 104
> 2 calls
> lsof | grep asterisk | grep FIFO | wc -l
> 168
> 3 calls
> lsof | grep asterisk | grep FIFO | wc -l
> 240
> 4 calls
> lsof | grep asterisk | grep FIFO | wc -l
> 320
> {noformat}
> As you can see, the handles do not grow linearly, but close to exponentially.
--
This message was sent by Atlassian JIRA
(v6.2#6252)
More information about the asterisk-bugs
mailing list