[asterisk-bugs] [JIRA] (ASTERISK-25605) outboundproxy= works globally but not for individual SIP trunks
PowerPBX (JIRA)
noreply at issues.asterisk.org
Mon Dec 7 20:29:33 CST 2015
[ https://issues.asterisk.org/jira/browse/ASTERISK-25605?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=228571#comment-228571 ]
PowerPBX edited comment on ASTERISK-25605 at 12/7/15 8:29 PM:
--------------------------------------------------------------
Hi,
I don't think that is talking about the same thing. There is no description what "sip_proxy" is and no mention of the outboundproxy setting.
I think the way I have already described it above is pretty clear with respect to the "outboundproxy" feature.
Note that as far as I know, "sip_proxy" and "outboundproxy" are not the same thing. sip proxy is both directions. Outboundproxy is a situation where the outbound connection is not the same as the inbound connection. Also there are 2 parts to that. The registration part which is the part I was referring to. Then there is the inbound part after registration. That then needs a separate inbound route as that existing description sort of refers to.
was (Author: powerpbx):
Hi,
I don't think that is talking about the same thing. There is no description what "sip_proxy" is and no mention of the outboundproxy setting.
I think the way I have already described it above is pretty clear with respect to the "outboundproxy" feature.
Note that as far as I know, "sip_proxy" and "outboundproxy" are not the same thing. sip proxy is both directions. Outboundproxy is a situation where the outbound connection is not the same as the inbound connection. Also there are 2 parts to that. The registration part which is the part I was referring to. Then there is the inbound communcation after registration. That then needs a separate inbound route as that existing description sort of refers to.
> outboundproxy= works globally but not for individual SIP trunks
> ---------------------------------------------------------------
>
> Key: ASTERISK-25605
> URL: https://issues.asterisk.org/jira/browse/ASTERISK-25605
> Project: Asterisk
> Issue Type: Improvement
> Security Level: None
> Components: Channels/chan_sip/General, Documentation
> Affects Versions: 13.5.0, 13.6.0
> Environment: CentOS v6 32bit, VPS
> Reporter: PowerPBX
> Assignee: Unassigned
> Severity: Trivial
>
> Normal SIP trunk configuration. However some providers use an outboundproxy.
> With the outboundproxy configured I do not see any traffic being sent out to that outboundproxy IP. I also tried adding the ,force option
> So my [sometrunk] config includes:
> outboundproxy=xx.xx.xx.xx:5065,force
> I tried with and without the port setting and ,force option. It does not make any difference. There is never any traffic sent out to that IP.
> If I add that exact same configuration under [general] settings in sip.conf it immediately starts working. That is not a solution because it does that for all trunks and I need it to only do it for 1 trunk.
--
This message was sent by Atlassian JIRA
(v6.2#6252)
More information about the asterisk-bugs
mailing list