[asterisk-bugs] [JIRA] (ASTERISK-25605) outboundproxy= works globally but not for individual SIP trunks

[PowerPBX (JIRA)]

    [ https://issues.asterisk.org/jira/browse/ASTERISK-25605?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=228571#comment-228571 ] 

PowerPBX edited comment on ASTERISK-25605 at 12/7/15 8:26 PM:
--------------------------------------------------------------

Hi,

That is not clear to me at all.  I don't think that is talking about the same thing.  There is no description what "sip_proxy" is and no mention of the outboundproxy setting.  

I think the way I have already described it above is pretty clear with respect to the "outboundproxy" feature.  

Note that as far as I know, "sip_proxy" and "outboundproxy" are not the same thing.  sip proxy is both directions.  Outboundproxy is a situation where the outbound connection is not the same as the inbound connection.  Also there are 2 parts to that.  The registration part which is the part I was referring to.  Then there is the inbound communcation after registration.  That then needs a separate inbound route.


was (Author: powerpbx):
Hi,

That is not clear to me at all.  I don't even know if that talking about the same thing since there is no description what "sip_proxy" is and no mention of the outboundproxy setting.  

I think the way I have already described it above is pretty clear with respect to the "outboundproxy" feature.  

Note that as far as I know, "sip_proxy" and "outboundproxy" are not the same thing.

> outboundproxy= works globally but not for individual SIP trunks
> ---------------------------------------------------------------
>
>                 Key: ASTERISK-25605
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-25605
>             Project: Asterisk
>          Issue Type: Improvement
>      Security Level: None
>          Components: Channels/chan_sip/General, Documentation
>    Affects Versions: 13.5.0, 13.6.0
>         Environment: CentOS v6 32bit, VPS
>            Reporter: PowerPBX
>            Assignee: Unassigned
>            Severity: Trivial
>
> Normal SIP trunk configuration.  However some providers use an outboundproxy.
> With the outboundproxy configured I do not see any traffic being sent out to that outboundproxy IP.  I also tried adding the ,force option
> So my [sometrunk] config includes:
> outboundproxy=xx.xx.xx.xx:5065,force
> I tried with and without the port setting and ,force option.  It does not make any difference.  There is never any traffic sent out to that IP.
> If I add that exact same configuration under [general] settings in sip.conf it immediately starts working.  That is not a solution because it does that for all trunks and I need it to only do it for 1 trunk.



--
This message was sent by Atlassian JIRA
(v6.2#6252)