[asterisk-bugs] [JIRA] (ASTERISK-22903) SIP Hangs, Asterisk becomes unresponsive

Thu Jan 2 11:21:03 CST 2014

    [ https://issues.asterisk.org/jira/browse/ASTERISK-22903?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=213530#comment-213530 ] 

Craig Arno commented on ASTERISK-22903:
---------------------------------------

Matt, Thank you for checking all those different system types.

A recap; I use external Broadvoice and IPKall services with Asterisk 11.6.0. My hardware is (ASUS Sabertooth 990FX, AMD FX-8120, 8GB RAM) with software distribution (OpenSUSE 12.2 x64).  The only other comment I can think to add is Dan Berninger (formerly FreeWorld Dialup) once commented my Asterisk configuration is the most complex (non-commercial) setup he knows about.  My system is built around a standard Asterisk distribution with no add-ons.

With Thread debug disabled, no optimization, this system is continuing to operate after 2.5 days.  Previous failures with Thread debug enabled usually stopped responding to calls in about 1-1.5 days.

> SIP Hangs, Asterisk becomes unresponsive
> ----------------------------------------
>
>                 Key: ASTERISK-22903
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-22903
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: Core/General
>    Affects Versions: 11.6.0
>         Environment: OpenSUSE 12.2 x64 (uname -a):
> Linux pluto 3.4.63-2.44-desktop #1 SMP PREEMPT Wed Oct 2 11:18:32 UTC 2013 (d91a619) x86_64 x86_64 x86_64 GNU/Linux
> AMD FX-8120 processor.
>            Reporter: Craig Arno
>            Assignee: Craig Arno
>         Attachments: backtrace5.txt, core-show-locks5.txt, start-msgs-11.5.1.txt, start-msgs-11.6.0.txt
>
>
> I'm here looking for a solution to a SIP/Asterisk hang issue which showed first in Asterisk version 11.6.0. I rolled back to 11.5.1 which works fine on my server.
> When I figure out my Asterisk 11.6.0 installation isn't accepting calls, I execute "core stop now", and am told Asterisk is stopping, and everything looks/behaves normal. There is no running Asterisk process. I then restart Asterisk from the command prompt, no options and it looks like it boots normally, except Asterisk will then not respond to commands, like "core stop now". Asterisk also won't quit with a normal "kill" command. The only way to stop Asterisk 11.6.0 is to "kill -9".
> At this point, starting Asterisk 11.6.0 yet another time and it will execute normally for about another day before sliding silently into this "dead" behavior again.
> My call volume is very low, only about 1-5/day. All my Sipura (2000, 2100, 3000, etc) devices are connected using SIP. My hardware is AMD FX-8120, ASUS Sabertooth 990FX, 8GB RAM, 9 TB HD... running under OpenSUSE 12.2 x64; Linux pluto 3.4.63-2.44-desktop #1 SMP PREEMPT Wed Oct 2 11:18:32 UTC 2013 (d91a619) x86_64. Asterisk 11.6.0 is compiled with optimization off and thread debugging on. There are no resource issues and all parts are running to factory specifications. This Asterisk is exposed to the Internet for 2 SIP users and incoming/outgoing calls. This is a stable system (not a new installation).
> I've been silent hoping for another release soon. This looks like a difficult problem to solve, so if I can perform some actions to help without risking an undetectable loss of phone service, please let me know how. 11.5.1 is continuing to run well for me.
> After reviewing 11.6.0 issues, ASTERISK-22854 looks the closest to what I may be experiencing.
> I tried the forums http://forums.asterisk.org/viewtopic.php?f=1&t=88593

--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators: https://issues.asterisk.org/jira/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira