[asterisk-bugs] [JIRA] (PRI-159) T309 timed out waiting for data link re-establishment
Thomas Geiger (JIRA)
noreply at issues.asterisk.org
Mon Sep 23 05:36:03 CDT 2013
[ https://issues.asterisk.org/jira/browse/PRI-159?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Thomas Geiger updated PRI-159:
------------------------------
Description:
After a 10 to 15 minutes the call is going to disconnect and in the log I get the following message:
PRI Span: 1
PRI Span: 1 < TEI: -90 State 2(Assign awaiting TEI)
PRI Span: 1 < V(A)=15, V(S)=15, V(R)=9
PRI Span: 1 < K=1, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 < T200_id=0, N200=3, T203_id=0
PRI Span: 1 < [ fe ff 03 0f 5e 54 02 b9 ]
PRI Span: 1 < Unnumbered frame:
PRI Span: 1 < SAPI: 63 C/R: 1 EA: 0
PRI Span: 1 < TEI: 127 EA: 1
PRI Span: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
PRI Span: 1 < 5 bytes of data
PRI Span: 1 < MDL Message: 2(TEI Identity Assigned)
PRI Span: 1 < Ri: 24148
PRI Span: 1 < Ai: 92 E:1
PRI Span: 1 Received MDL message
PRI Span: 1 Got assigned TEI 92
PRI Span: 1 Changing from state 2(Assign awaiting TEI) to 4(TEI assigned)
Span 1: Processing event PRI_EVENT_DCHAN_UP(1)
PRI Span: 1
PRI Span: 1 < TEI: 92 State 4(TEI assigned)
PRI Span: 1 < V(A)=15, V(S)=15, V(R)=9
PRI Span: 1 < K=1, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 < T200_id=0, N200=3, T203_id=0
PRI Span: 1 < [ fe ff 03 0f 00 00 06 b5 ]
PRI Span: 1 < Unnumbered frame:
PRI Span: 1 < SAPI: 63 C/R: 1 EA: 0
PRI Span: 1 < TEI: 127 EA: 1
PRI Span: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
PRI Span: 1 < 5 bytes of data
PRI Span: 1 < MDL Message: 6(TEI Identity Remove)
PRI Span: 1 < Ri: 0
PRI Span: 1 < Ai: 90 E:1
PRI Span: 1 Received MDL message
PRI Span: 1
PRI Span: 1 < TEI: 92 State 4(TEI assigned)
PRI Span: 1 < V(A)=15, V(S)=15, V(R)=9
PRI Span: 1 < K=1, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 < T200_id=0, N200=3, T203_id=0
PRI Span: 1 < [ 02 b5 53 ]
PRI Span: 1 < Unnumbered frame:
PRI Span: 1 < SAPI: 00 C/R: 1 EA: 0
PRI Span: 1 < TEI: 090 EA: 1
PRI Span: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ]
PRI Span: 1 < 0 bytes of data
PRI Span: 1 Done handling message for SAPI/TEI=0/90
PRI Span: 1 T309 timed out waiting for data link re-establishment
PRI Span: 1 q931.c:9652 pri_dl_down_timeout: Call 1 enters state 0 (Null). Hold state: Idle
PRI Span: 1 q931.c:9606 pri_internal_clear: alive 1, hangupack 0
Span 1: Processing event PRI_EVENT_HANGUP(6)
My config of dahdi is:
Primary D-channel: 3
Status: Up, Active
Switchtype: EuroISDN
Type: BRI CPE PTMP
Remote type: Unknown node type
Overlap Dial: 0
Logical Channel Mapping: 0
Timer and counter settings:
N200: 3
N202: 3
K: 1
T200: 1000
T201: 1000
T202: 10000
T203: 10000
T303: 4000
T305: 30000
T308: 4000
T309: 6000
T312: 6000
T313: 4000
T316: -1
N316: 2
T-HOLD: 4000
T-RETRIEVE: 4000
T-RESPONSE: 4000
T-STATUS: 4000
T-ACTIVATE: 10000
T-DEACTIVATE: 4000
T-INTERROGATE: 4000
T-RETENTION: 30000
T-CCBS1: 4000
T-CCBS2: 2700000
T-CCBS3: 20000
T-CCBS4: 5000
T-CCBS5: 3600000
T-CCBS6: 3600000
T-CCNR2: 10800000
T-CCNR5: 11700000
T-CCNR6: 11700000
Q931 RX: 12
Q931 TX: 15
Q921 RX: 107
Q921 TX: 91
Q921 Outstanding: 0 (TEI=127)
Q921 Outstanding: 0 (TEI=92)
Total active-calls:0 global:0
CC records:
status is:
Description Alarms IRQ bpviol CRC Fra Codi Options LBO
B4XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
dahdi_scan:
active=yes
alarms=OK
description=B4XXP (PCI) Card 0 Span 1
name=B4/0/1
manufacturer=Digium
devicetype=Wildcard B410P
location=PCI Bus 07 Slot 10
basechan=1
totchans=3
irq=0
type=digital-TE
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI,HDB3
framing_opts=ESF,D4,CCS,CRC4
coding=AMI
framing=CCS
My provisder is swisscom in switzerland and their checked the line and it looks ok.
When I use bri_cpe (Peer to Peer). The call is function. Only in ptmp the call is going hangup during the call after 10 to 15 minutes.
Thanks for any suggestions.
Cheers Thomas Geiger
was:
After a 10 to 15 minutes the call is going to disconnect and in the log I get the following message:
PRI Span: 1
PRI Span: 1 < TEI: -90 State 2(Assign awaiting TEI)
PRI Span: 1 < V(A)=15, V(S)=15, V(R)=9
PRI Span: 1 < K=1, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 < T200_id=0, N200=3, T203_id=0
PRI Span: 1 < [ fe ff 03 0f 5e 54 02 b9 ]
PRI Span: 1 < Unnumbered frame:
PRI Span: 1 < SAPI: 63 C/R: 1 EA: 0
PRI Span: 1 < TEI: 127 EA: 1
PRI Span: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
PRI Span: 1 < 5 bytes of data
PRI Span: 1 < MDL Message: 2(TEI Identity Assigned)
PRI Span: 1 < Ri: 24148
PRI Span: 1 < Ai: 92 E:1
PRI Span: 1 Received MDL message
PRI Span: 1 Got assigned TEI 92
PRI Span: 1 Changing from state 2(Assign awaiting TEI) to 4(TEI assigned)
Span 1: Processing event PRI_EVENT_DCHAN_UP(1)
PRI Span: 1
PRI Span: 1 < TEI: 92 State 4(TEI assigned)
PRI Span: 1 < V(A)=15, V(S)=15, V(R)=9
PRI Span: 1 < K=1, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 < T200_id=0, N200=3, T203_id=0
PRI Span: 1 < [ fe ff 03 0f 00 00 06 b5 ]
PRI Span: 1 < Unnumbered frame:
PRI Span: 1 < SAPI: 63 C/R: 1 EA: 0
PRI Span: 1 < TEI: 127 EA: 1
PRI Span: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
PRI Span: 1 < 5 bytes of data
PRI Span: 1 < MDL Message: 6(TEI Identity Remove)
PRI Span: 1 < Ri: 0
PRI Span: 1 < Ai: 90 E:1
PRI Span: 1 Received MDL message
PRI Span: 1
PRI Span: 1 < TEI: 92 State 4(TEI assigned)
PRI Span: 1 < V(A)=15, V(S)=15, V(R)=9
PRI Span: 1 < K=1, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 < T200_id=0, N200=3, T203_id=0
PRI Span: 1 < [ 02 b5 53 ]
PRI Span: 1 < Unnumbered frame:
PRI Span: 1 < SAPI: 00 C/R: 1 EA: 0
PRI Span: 1 < TEI: 090 EA: 1
PRI Span: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ]
PRI Span: 1 < 0 bytes of data
PRI Span: 1 Done handling message for SAPI/TEI=0/90
PRI Span: 1 T309 timed out waiting for data link re-establishment
PRI Span: 1 q931.c:9652 pri_dl_down_timeout: Call 1 enters state 0 (Null). Hold state: Idle
PRI Span: 1 q931.c:9606 pri_internal_clear: alive 1, hangupack 0
Span 1: Processing event PRI_EVENT_HANGUP(6)
My config of dahdi is:
Primary D-channel: 3
Status: Up, Active
Switchtype: EuroISDN
Type: BRI CPE PTMP
Remote type: Unknown node type
Overlap Dial: 0
Logical Channel Mapping: 0
Timer and counter settings:
N200: 3
N202: 3
K: 1
T200: 1000
T201: 1000
T202: 10000
T203: 10000
T303: 4000
T305: 30000
T308: 4000
T309: 6000
T312: 6000
T313: 4000
T316: -1
N316: 2
T-HOLD: 4000
T-RETRIEVE: 4000
T-RESPONSE: 4000
T-STATUS: 4000
T-ACTIVATE: 10000
T-DEACTIVATE: 4000
T-INTERROGATE: 4000
T-RETENTION: 30000
T-CCBS1: 4000
T-CCBS2: 2700000
T-CCBS3: 20000
T-CCBS4: 5000
T-CCBS5: 3600000
T-CCBS6: 3600000
T-CCNR2: 10800000
T-CCNR5: 11700000
T-CCNR6: 11700000
Q931 RX: 12
Q931 TX: 15
Q921 RX: 107
Q921 TX: 91
Q921 Outstanding: 0 (TEI=127)
Q921 Outstanding: 0 (TEI=92)
Total active-calls:0 global:0
CC records:
status is:
Description Alarms IRQ bpviol CRC Fra Codi Options LBO
B4XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
dahdi_scan:
active=yes
alarms=OK
description=B4XXP (PCI) Card 0 Span 1
name=B4/0/1
manufacturer=Digium
devicetype=Wildcard B410P
location=PCI Bus 07 Slot 10
basechan=1
totchans=3
irq=0
type=digital-TE
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI,HDB3
framing_opts=ESF,D4,CCS,CRC4
coding=AMI
framing=CCS
My provisder is swisscom in switzerland and their checked the line and it looks ok.
Thanks for any suggestions.
Cheers Thomas Geiger
> T309 timed out waiting for data link re-establishment
> -----------------------------------------------------
>
> Key: PRI-159
> URL: https://issues.asterisk.org/jira/browse/PRI-159
> Project: LibPRI
> Issue Type: Bug
> Security Level: None
> Components: General
> Environment: asterisk 11.5.1
> dahdi 2.7.0.1
> freepbx 2.11
> libpri 1.4.14 from branches
> Reporter: Thomas Geiger
> Assignee: Richard Mudgett
>
> After a 10 to 15 minutes the call is going to disconnect and in the log I get the following message:
> PRI Span: 1
> PRI Span: 1 < TEI: -90 State 2(Assign awaiting TEI)
> PRI Span: 1 < V(A)=15, V(S)=15, V(R)=9
> PRI Span: 1 < K=1, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
> PRI Span: 1 < T200_id=0, N200=3, T203_id=0
> PRI Span: 1 < [ fe ff 03 0f 5e 54 02 b9 ]
> PRI Span: 1 < Unnumbered frame:
> PRI Span: 1 < SAPI: 63 C/R: 1 EA: 0
> PRI Span: 1 < TEI: 127 EA: 1
> PRI Span: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
> PRI Span: 1 < 5 bytes of data
> PRI Span: 1 < MDL Message: 2(TEI Identity Assigned)
> PRI Span: 1 < Ri: 24148
> PRI Span: 1 < Ai: 92 E:1
> PRI Span: 1 Received MDL message
> PRI Span: 1 Got assigned TEI 92
> PRI Span: 1 Changing from state 2(Assign awaiting TEI) to 4(TEI assigned)
> Span 1: Processing event PRI_EVENT_DCHAN_UP(1)
> PRI Span: 1
> PRI Span: 1 < TEI: 92 State 4(TEI assigned)
> PRI Span: 1 < V(A)=15, V(S)=15, V(R)=9
> PRI Span: 1 < K=1, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
> PRI Span: 1 < T200_id=0, N200=3, T203_id=0
> PRI Span: 1 < [ fe ff 03 0f 00 00 06 b5 ]
> PRI Span: 1 < Unnumbered frame:
> PRI Span: 1 < SAPI: 63 C/R: 1 EA: 0
> PRI Span: 1 < TEI: 127 EA: 1
> PRI Span: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
> PRI Span: 1 < 5 bytes of data
> PRI Span: 1 < MDL Message: 6(TEI Identity Remove)
> PRI Span: 1 < Ri: 0
> PRI Span: 1 < Ai: 90 E:1
> PRI Span: 1 Received MDL message
> PRI Span: 1
> PRI Span: 1 < TEI: 92 State 4(TEI assigned)
> PRI Span: 1 < V(A)=15, V(S)=15, V(R)=9
> PRI Span: 1 < K=1, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
> PRI Span: 1 < T200_id=0, N200=3, T203_id=0
> PRI Span: 1 < [ 02 b5 53 ]
> PRI Span: 1 < Unnumbered frame:
> PRI Span: 1 < SAPI: 00 C/R: 1 EA: 0
> PRI Span: 1 < TEI: 090 EA: 1
> PRI Span: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ]
> PRI Span: 1 < 0 bytes of data
> PRI Span: 1 Done handling message for SAPI/TEI=0/90
> PRI Span: 1 T309 timed out waiting for data link re-establishment
> PRI Span: 1 q931.c:9652 pri_dl_down_timeout: Call 1 enters state 0 (Null). Hold state: Idle
> PRI Span: 1 q931.c:9606 pri_internal_clear: alive 1, hangupack 0
> Span 1: Processing event PRI_EVENT_HANGUP(6)
> My config of dahdi is:
> Primary D-channel: 3
> Status: Up, Active
> Switchtype: EuroISDN
> Type: BRI CPE PTMP
> Remote type: Unknown node type
> Overlap Dial: 0
> Logical Channel Mapping: 0
> Timer and counter settings:
> N200: 3
> N202: 3
> K: 1
> T200: 1000
> T201: 1000
> T202: 10000
> T203: 10000
> T303: 4000
> T305: 30000
> T308: 4000
> T309: 6000
> T312: 6000
> T313: 4000
> T316: -1
> N316: 2
> T-HOLD: 4000
> T-RETRIEVE: 4000
> T-RESPONSE: 4000
> T-STATUS: 4000
> T-ACTIVATE: 10000
> T-DEACTIVATE: 4000
> T-INTERROGATE: 4000
> T-RETENTION: 30000
> T-CCBS1: 4000
> T-CCBS2: 2700000
> T-CCBS3: 20000
> T-CCBS4: 5000
> T-CCBS5: 3600000
> T-CCBS6: 3600000
> T-CCNR2: 10800000
> T-CCNR5: 11700000
> T-CCNR6: 11700000
> Q931 RX: 12
> Q931 TX: 15
> Q921 RX: 107
> Q921 TX: 91
> Q921 Outstanding: 0 (TEI=127)
> Q921 Outstanding: 0 (TEI=92)
> Total active-calls:0 global:0
> CC records:
> status is:
> Description Alarms IRQ bpviol CRC Fra Codi Options LBO
> B4XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
> dahdi_scan:
> active=yes
> alarms=OK
> description=B4XXP (PCI) Card 0 Span 1
> name=B4/0/1
> manufacturer=Digium
> devicetype=Wildcard B410P
> location=PCI Bus 07 Slot 10
> basechan=1
> totchans=3
> irq=0
> type=digital-TE
> syncsrc=0
> lbo=0 db (CSU)/0-133 feet (DSX-1)
> coding_opts=B8ZS,AMI,HDB3
> framing_opts=ESF,D4,CCS,CRC4
> coding=AMI
> framing=CCS
> My provisder is swisscom in switzerland and their checked the line and it looks ok.
> When I use bri_cpe (Peer to Peer). The call is function. Only in ptmp the call is going hangup during the call after 10 to 15 minutes.
> Thanks for any suggestions.
> Cheers Thomas Geiger
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators: https://issues.asterisk.org/jira/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
More information about the asterisk-bugs
mailing list