[asterisk-bugs] [JIRA] (DAHLIN-323) dahdi-linux-complete-2.6.3-rc1+2.6.3-rc1 release it doesn't generated system.conf according to hardware detected on system

[Mc GRATH Ricardo (JIRA)]

    [ https://issues.asterisk.org/jira/browse/DAHLIN-323?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=206609#comment-206609 ] 

Mc GRATH Ricardo commented on DAHLIN-323:
-----------------------------------------

Hi! thanks.

I paste the information after completed dahdi installation and runing dahdi_genconf for generated system.conf file, by the way be advised in my case I have installed on  my system a TE122 card.

Paste output 

Message after complete dahdi installation process
 

run 'dahdi_genconf modules' to load support for only
the DAHDI hardware installed in this system.  By
default support for all DAHDI hardware is loaded at
DAHDI start.

Default system.conf file generated by dahdi_genconf

# Autogenerated by /usr/sbin/dahdi_genconf on Thu May 16 20:04:48 2013
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Global data
loadzone        = us
defaultzone     = us 

                
> dahdi-linux-complete-2.6.3-rc1+2.6.3-rc1 release it doesn't generated system.conf according to hardware detected on system 
> ---------------------------------------------------------------------------------------------------------------------------
>
>                 Key: DAHLIN-323
>                 URL: https://issues.asterisk.org/jira/browse/DAHLIN-323
>             Project: DAHDI-Linux
>          Issue Type: Bug
>      Security Level: None
>          Components: General
>         Environment: Linux 2.6.18-348.4.1.el5 #1 
> i686 athlon i386 GNU/Linux
> pci:0000:00:0a.0     wcte12xp+    d161:8001 Wildcard TE122
>            Reporter: Mc GRATH Ricardo
>            Assignee: Russ Meyerriecks
>
> I have make a new installation with dahdi-linux-complete-2.6.3-rc1+2.6.3-rc1 release, after complete installation process  and perform dahdi_genconf to generate system.conf file according to the DAHDI hardware installed, it seems system.conf it doesn't included hardware detected, it only displayed loadzone and default load zone.
> It should generated system.conf according to hardware detected on system with default parameters, if it perform manually dahdi_genconf modules it doesn't included any modules.
> During installation process no report error message, only I could find these message capture with putty terminal.
> WARNING: could not find /usr/src/Asterisk/dahdi-linux-complete-2.6.3-rc1+2.6.3-rc1/linux/drivers/dahdi/vpmadt032_loader/.vpmadt032_x86_32.o.cmd for /usr/src/Asterisk/dahdi-linux-complete-2.6.3-rc1+2.6.3-rc1/linux/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_32.o
> I'm not sure if these message have relevant with miss configured onto system.conf on /etc/dahdi directory, my doubt is, if dahdi drivers installed  it can be used without any other problem, or in other words if the installation process  it have been completed and successfully installed without affecting to other process. 

--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators: https://issues.asterisk.org/jira/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira