[asterisk-bugs] [JIRA] (ASTERISK-21898) Read application does not set the variable

[Michael L. Young (JIRA)]

    [ https://issues.asterisk.org/jira/browse/ASTERISK-21898?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=207144#comment-207144 ] 

Michael L. Young edited comment on ASTERISK-21898 at 6/11/13 7:54 AM:
----------------------------------------------------------------------

Here is the myDebugLog contents. I dialed the number, dongle answered the call and played the voice prompt. After that same result, no dtmf.

[removed debug log and attached it to issue]
                
      was (Author: jsiddharth):
    Here is the myDebugLog contents. I dialed the number, dongle answered the call and played the voice prompt. After that same result, no dtmf.
                  
> Read application does not set the variable
> ------------------------------------------
>
>                 Key: ASTERISK-21898
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-21898
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: Applications/app_read
>    Affects Versions: 11.4.0
>         Environment: I am running a Ubuntu 12.04, I have downloaded 1.8 asterisk version, build was successful. I have configured chan_dongle to work with a voice enabled dongle.
> Marked as Major since setting the variable is a essential feature for the read application. Without that its a useless app.
>            Reporter: Siddharth Jagtiani
>            Assignee: Siddharth Jagtiani
>         Attachments: debugLog.txt
>
>
> {noformat}
> >core show dongle state dongle0< reports
>  Device                  : dongle0
>   State                   : Free
>   Audio                   : /dev/ttyUSB1
>   Data                    : /dev/ttyUSB2
>   Voice                   : Yes
>   SMS                     : Yes
>   Manufacturer            : huawei
>   Model                   : E303D
>   Firmware                : 21.157.72.00.356
>   IMEI                    : correctIMEI
>   IMSI                    : correctIMSI
>   GSM Registration Status : Registered, home network
>   RSSI                    : 15, -116 dBm
>   Mode                    : No Service
>   Submode                 : No service
>   Provider Name           : IDEA
>   Location area code      : "A03D"
>   Cell ID                 : "B96B"
>   Subscriber Number       : Unknown
>   SMS Service Center      : +91correctnumber
>   Use UCS-2 encoding      : Yes
>   USSD use 7 bit encoding : No
>   USSD use UCS-2 decoding : Yes
>   Tasks in queue          : 0
>   Commands in queue       : 0
>   Call Waiting            : Disabled
>   Current device state    : start
>   Desired device state    : start
>   When change state       : now
>   Calls/Channels          : 0
>     Active                : 0
>     Held                  : 0
>     Dialing               : 0
>     Alerting              : 0
>     Incoming              : 0
>     Waiting               : 0
>     Releasing             : 0
>     Initializing          : 0
> {noformat}
> When I make a incoming call, and put punch in a code I get following results only in " entered" as a result.
> When I send a sms to this number, it fills up sms.txt with the sms and the source number correctly.
> Basically pincode variable does not get a value on the read application.
> {noformat}
> Extensions.conf
> [dongle-incoming]
> exten => sms,1,Verbose(Incoming SMS from ${CALLERID(num)} ${SMS})
> exten => sms,n,System(echo '${STRFTIME(${EPOCH},,%Y-%m-%d %H:%M:%S)} - ${DONGLE} - ${CALLERID(num)}: ${SMS}' >> /var/log/asterisk/sms.txt)
> exten => sms,n,Hangup()
> exten => ussd,1,Verbose(Incoming USSD: ${USSD})
> exten => ussd,n,System(echo '${STRFTIME(${EPOCH},,%Y-%m-%d %H:%M:%S)} - ${DONGLE}: ${USSD}' >> /var/log/asterisk/ussd.txt)
> exten => ussd,n,Hangup()
> exten => s,1,Answer()
> exten => s,n,Read(pincode,agent-newlocation,3)
> exten => s,n,System(echo '${pincode} entered')
> exten => s,n,Goto(1)
> {noformat}

--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators: https://issues.asterisk.org/jira/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira