[asterisk-bugs] [JIRA] (ASTERISK-21898) Read application does not set the variable
Michael L. Young (JIRA)
noreply at issues.asterisk.org
Tue Jun 11 07:55:09 CDT 2013
[ https://issues.asterisk.org/jira/browse/ASTERISK-21898?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=207144#comment-207144 ]
Michael L. Young edited comment on ASTERISK-21898 at 6/11/13 7:54 AM:
----------------------------------------------------------------------
Here is the myDebugLog contents. I dialed the number, dongle answered the call and played the voice prompt. After that same result, no dtmf.
was (Author: jsiddharth):
Here is the myDebugLog contents. I dialed the number, dongle answered the call and played the voice prompt. After that same result, no dtmf.
[Jun 11 18:06:43] VERBOSE[19592] config.c: == Parsing '/etc/asterisk/logger.conf': [Jun 11 18:06:43] DEBUG[19592] config.c: Parsing /etc/asterisk/logger.conf
[Jun 11 18:06:43] VERBOSE[19592] config.c: == Found
[Jun 11 18:06:43] VERBOSE[19592] logger.c: Asterisk Queue Logger restarted
[Jun 11 18:06:51] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:06:51] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:06:51] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:06:51] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:06:51] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:06:51] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:06:51] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:06:51] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:07:00] DEBUG[19607] chan_mobile.c: connect() failed (115).
[Jun 11 18:07:01] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:07:01] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:07:01] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:07:01] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:07:01] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:07:01] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:07:01] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:07:01] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:07:09] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:07:09] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 14
]
[Jun 11 18:07:13] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:07:13] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 11
]
[Jun 11 18:07:15] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:07:15] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 15
]
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] receive 8 byte, used 8, free 2040, read 0, write 8
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] [
RING
]
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT+CLCC' expected response 'OK' after head of queue
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] write command 'AT+CLCC' expected response 'OK' length 8
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] [AT+CLCC
]
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] insert task with 2 commands begin with 'AT+CLVL' expected response 'OK' after head of queue
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] receive 49 byte, used 49, free 1999, read 0, write 49
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] [
+CLCC: 1,1,4,0,0,"919689597995",145,"",
OK
]
[Jun 11 18:07:23] DEBUG[19618] at_response.c: [dongle0] CLCC callidx 1 dir 1 state 4 mode 0 mpty 0 number 919689597995 type 145
[Jun 11 18:07:23] DEBUG[19618] cpvt.c: [dongle0] create cpvt for call_idx 1 dir 1 state 'incoming'
[Jun 11 18:07:23] DEBUG[19618] at_response.c: [dongle0] AT+CLCC sent successfully
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT+CLCC' expected response 'OK' real 'OK' cmd 1/1 flags 0x01 from queue
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT+CLCC' expected response 'OK' from queue
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] write command 'AT+CLVL' expected response 'OK' length 10
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] [AT+CLVL=1
]
[Jun 11 18:07:23] VERBOSE[19639] pbx.c: == Starting Dongle/dongle0-0100000000 at dongle-incoming,+1234567890,1 failed so falling back to exten 's'
[Jun 11 18:07:23] DEBUG[19639] pbx.c: Launching 'Answer'
[Jun 11 18:07:23] VERBOSE[19639] pbx.c: -- Executing [s at dongle-incoming:1] Answer("Dongle/dongle0-0100000000", "") in new stack
[Jun 11 18:07:23] DEBUG[19639] at_queue.c: [dongle0] insert task with 2 commands begin with 'ATA' expected response 'OK' after head of queue
[Jun 11 18:07:23] DEBUG[19598] devicestate.c: No provider found, checking channel drivers for Dongle - dongle0
[Jun 11 18:07:23] DEBUG[19598] channel.c: Checking device state for device dongle0
[Jun 11 18:07:23] DEBUG[19639] channel.c: [Dongle/dongle0-0100000000] Requested indication -1
[Jun 11 18:07:23] DEBUG[19598] devicestate.c: Changing state for Dongle/dongle0 - state 2 (In use)
[Jun 11 18:07:23] DEBUG[19598] devicestate.c: device 'Dongle/dongle0' state '2'
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT+CLVL' expected response 'OK' real 'OK' cmd 1/2 flags 0x01 from queue
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] write command 'AT+CLVL' expected response 'OK' length 10
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] [AT+CLVL=5
]
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:07:23] DEBUG[19618] at_response.c: [dongle0] Volume level synchronized
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT+CLVL' expected response 'OK' real 'OK' cmd 2/2 flags 0x01 from queue
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] remove task with 2 command(s) begin with 'AT+CLVL' expected response 'OK' from queue
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] write command 'ATA' expected response 'OK' length 4
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] [ATA
]
[Jun 11 18:07:23] DEBUG[19620] app_queue.c: Device 'Dongle/dongle0' changed to state '2' (In use) but we don't care because they're not a member of any queue.
[Jun 11 18:07:23] DEBUG[19639] channel.c: Didn't receive a media frame from Dongle/dongle0-0100000000 within 500 ms of answering. Continuing anyway
[Jun 11 18:07:23] DEBUG[19639] pbx.c: Launching 'Playback'
[Jun 11 18:07:23] VERBOSE[19639] pbx.c: -- Executing [s at dongle-incoming:2] Playback("Dongle/dongle0-0100000000", ""agent-newlocation"") in new stack
[Jun 11 18:07:23] DEBUG[19639] channel.c: Set channel Dongle/dongle0-0100000000 to write format gsm
[Jun 11 18:07:23] DEBUG[19639] channel.c: Scheduling timer at (50 requested / 50 actual) timer ticks per second
[Jun 11 18:07:23] VERBOSE[19639] file.c: -- <Dongle/dongle0-0100000000> Playing 'agent-newlocation.gsm' (language 'en')
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:07:23] DEBUG[19618] at_response.c: [dongle0] ATA sent successfully for call id 1
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] remove command 'ATA' expected response 'OK' real 'OK' cmd 1/2 flags 0x00 from queue
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] write command 'AT^DDSETEX' expected response 'OK' length 13
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] [AT^DDSETEX=2
]
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] [
^CONN:1,0
]
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT+CLCC' expected response 'OK' after head of queue
[Jun 11 18:07:23] DEBUG[19618] at_response.c: [dongle0] CONN Received call_index 1 call_type 0
[Jun 11 18:07:23] DEBUG[19618] channel.c: [dongle0] call idx 1 mpty 0, change state from 'incoming' to 'active' has channel
[Jun 11 18:07:23] DEBUG[19618] channel.c: [dongle0] Call idx 1 answer
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:07:23] DEBUG[19618] at_response.c: [dongle0] AT^DDSETEX sent successfully
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT^DDSETEX' expected response 'OK' real 'OK' cmd 2/2 flags 0x01 from queue
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] remove task with 2 command(s) begin with 'ATA' expected response 'OK' from queue
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] write command 'AT+CLCC' expected response 'OK' length 8
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] [AT+CLCC
]
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] receive 49 byte, used 49, free 1999, read 0, write 49
[Jun 11 18:07:23] DEBUG[19618] at_read.c: [dongle0] [
+CLCC: 1,1,0,0,0,"919689597995",145,"",
OK
]
[Jun 11 18:07:23] DEBUG[19618] at_response.c: [dongle0] CLCC callidx 1 dir 1 state 0 mode 0 mpty 0 number 919689597995 type 145
[Jun 11 18:07:23] DEBUG[19618] at_response.c: [dongle0] AT+CLCC sent successfully
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT+CLCC' expected response 'OK' real 'OK' cmd 1/1 flags 0x01 from queue
[Jun 11 18:07:23] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT+CLCC' expected response 'OK' from queue
[Jun 11 18:07:25] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:07:25] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 12
]
[Jun 11 18:07:26] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:07:26] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 15
]
[Jun 11 18:07:26] DEBUG[19639] channel.c: Scheduling timer at (0 requested / 0 actual) timer ticks per second
[Jun 11 18:07:26] DEBUG[19639] channel.c: Scheduling timer at (0 requested / 0 actual) timer ticks per second
[Jun 11 18:07:26] DEBUG[19639] channel.c: Scheduling timer at (0 requested / 0 actual) timer ticks per second
[Jun 11 18:07:26] DEBUG[19639] channel.c: Set channel Dongle/dongle0-0100000000 to write format slin
[Jun 11 18:07:26] DEBUG[19639] pbx.c: Launching 'Read'
[Jun 11 18:07:26] VERBOSE[19639] pbx.c: -- Executing [s at dongle-incoming:3] Read("Dongle/dongle0-0100000000", "pincode,,3,sn,3,12") in new stack
[Jun 11 18:07:26] VERBOSE[19639] app_read.c: -- Accepting a maximum of 3 digits.
[Jun 11 18:07:30] DEBUG[19607] chan_mobile.c: connect() failed (115).
[Jun 11 18:07:31] DEBUG[19618] at_read.c: [dongle0] receive 18 byte, used 18, free 2030, read 0, write 18
[Jun 11 18:07:31] DEBUG[19618] at_read.c: [dongle0] [
^CEND:1,7,0,16
]
[Jun 11 18:07:31] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT+CLCC' expected response 'OK' after head of queue
[Jun 11 18:07:31] DEBUG[19618] at_queue.c: [dongle0] write command 'AT+CLCC' expected response 'OK' length 8
[Jun 11 18:07:31] DEBUG[19618] at_queue.c: [dongle0] [AT+CLCC
]
[Jun 11 18:07:31] DEBUG[19618] at_response.c: [dongle0] CEND: call_index 1 duration 7 end_status 0 cc_cause 16 Line disconnected
[Jun 11 18:07:31] DEBUG[19618] channel.c: [dongle0] call idx 1 mpty 0, change state from 'active' to 'released' has channel
[Jun 11 18:07:31] DEBUG[19618] cpvt.c: [dongle0] destroy cpvt for call_idx 1 dir 1 state 'released' flags 8 has channel
[Jun 11 18:07:31] VERBOSE[19639] app_read.c: -- User disconnected
[Jun 11 18:07:31] DEBUG[19639] pbx.c: Extension s, priority 3 returned normally even though call was hung up
[Jun 11 18:07:31] DEBUG[19639] channel.c: Soft-Hanging up channel 'Dongle/dongle0-0100000000'
[Jun 11 18:07:31] DEBUG[19639] channel.c: Hanging up channel 'Dongle/dongle0-0100000000'
[Jun 11 18:07:31] DEBUG[19598] devicestate.c: No provider found, checking channel drivers for Dongle - dongle0
[Jun 11 18:07:31] DEBUG[19598] channel.c: Checking device state for device dongle0
[Jun 11 18:07:31] DEBUG[19598] devicestate.c: Changing state for Dongle/dongle0 - state 1 (Not in use)
[Jun 11 18:07:31] DEBUG[19598] devicestate.c: device 'Dongle/dongle0' state '1'
[Jun 11 18:07:31] DEBUG[19620] app_queue.c: Device 'Dongle/dongle0' changed to state '1' (Not in use) but we don't care because they're not a member of any queue.
[Jun 11 18:07:31] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:07:31] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:07:31] DEBUG[19618] at_response.c: [dongle0] AT+CLCC sent successfully
[Jun 11 18:07:31] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT+CLCC' expected response 'OK' real 'OK' cmd 1/1 flags 0x01 from queue
[Jun 11 18:07:31] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT+CLCC' expected response 'OK' from queue
[Jun 11 18:07:31] DEBUG[19598] devicestate.c: No provider found, checking channel drivers for Dongle - dongle0
[Jun 11 18:07:31] DEBUG[19598] channel.c: Checking device state for device dongle0
[Jun 11 18:07:31] DEBUG[19598] devicestate.c: Changing state for Dongle/dongle0 - state 1 (Not in use)
[Jun 11 18:07:31] DEBUG[19598] devicestate.c: device 'Dongle/dongle0' state '1'
[Jun 11 18:07:31] DEBUG[19620] app_queue.c: Device 'Dongle/dongle0' changed to state '1' (Not in use) but we don't care because they're not a member of any queue.
[Jun 11 18:07:32] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:07:32] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 13
]
[Jun 11 18:07:38] DEBUG[19618] at_read.c: [dongle0] receive 8 byte, used 8, free 2040, read 0, write 8
[Jun 11 18:07:38] DEBUG[19618] at_read.c: [dongle0] [
RING
]
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT+CLCC' expected response 'OK' after head of queue
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] write command 'AT+CLCC' expected response 'OK' length 8
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] [AT+CLCC
]
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] insert task with 2 commands begin with 'AT+CLVL' expected response 'OK' after head of queue
[Jun 11 18:07:38] DEBUG[19618] at_read.c: [dongle0] receive 49 byte, used 49, free 1999, read 0, write 49
[Jun 11 18:07:38] DEBUG[19618] at_read.c: [dongle0] [
+CLCC: 1,1,4,0,0,"919689597995",145,"",
OK
]
[Jun 11 18:07:38] DEBUG[19618] at_response.c: [dongle0] CLCC callidx 1 dir 1 state 4 mode 0 mpty 0 number 919689597995 type 145
[Jun 11 18:07:38] DEBUG[19618] cpvt.c: [dongle0] create cpvt for call_idx 1 dir 1 state 'incoming'
[Jun 11 18:07:38] DEBUG[19618] at_response.c: [dongle0] AT+CLCC sent successfully
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT+CLCC' expected response 'OK' real 'OK' cmd 1/1 flags 0x01 from queue
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT+CLCC' expected response 'OK' from queue
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] write command 'AT+CLVL' expected response 'OK' length 10
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] [AT+CLVL=1
]
[Jun 11 18:07:38] VERBOSE[19646] pbx.c: == Starting Dongle/dongle0-0100000001 at dongle-incoming,+1234567890,1 failed so falling back to exten 's'
[Jun 11 18:07:38] DEBUG[19646] pbx.c: Launching 'Answer'
[Jun 11 18:07:38] VERBOSE[19646] pbx.c: -- Executing [s at dongle-incoming:1] Answer("Dongle/dongle0-0100000001", "") in new stack
[Jun 11 18:07:38] DEBUG[19646] at_queue.c: [dongle0] insert task with 2 commands begin with 'ATA' expected response 'OK' after head of queue
[Jun 11 18:07:38] DEBUG[19598] devicestate.c: No provider found, checking channel drivers for Dongle - dongle0
[Jun 11 18:07:38] DEBUG[19598] channel.c: Checking device state for device dongle0
[Jun 11 18:07:38] DEBUG[19598] devicestate.c: Changing state for Dongle/dongle0 - state 2 (In use)
[Jun 11 18:07:38] DEBUG[19598] devicestate.c: device 'Dongle/dongle0' state '2'
[Jun 11 18:07:38] DEBUG[19620] app_queue.c: Device 'Dongle/dongle0' changed to state '2' (In use) but we don't care because they're not a member of any queue.
[Jun 11 18:07:38] DEBUG[19646] channel.c: [Dongle/dongle0-0100000001] Requested indication -1
[Jun 11 18:07:38] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:07:38] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT+CLVL' expected response 'OK' real 'OK' cmd 1/2 flags 0x01 from queue
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] write command 'AT+CLVL' expected response 'OK' length 10
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] [AT+CLVL=5
]
[Jun 11 18:07:38] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:07:38] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:07:38] DEBUG[19618] at_response.c: [dongle0] Volume level synchronized
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT+CLVL' expected response 'OK' real 'OK' cmd 2/2 flags 0x01 from queue
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] remove task with 2 command(s) begin with 'AT+CLVL' expected response 'OK' from queue
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] write command 'ATA' expected response 'OK' length 4
[Jun 11 18:07:38] DEBUG[19618] at_queue.c: [dongle0] [ATA
]
[Jun 11 18:07:38] DEBUG[19646] channel.c: Didn't receive a media frame from Dongle/dongle0-0100000001 within 500 ms of answering. Continuing anyway
[Jun 11 18:07:38] DEBUG[19646] pbx.c: Launching 'Playback'
[Jun 11 18:07:38] VERBOSE[19646] pbx.c: -- Executing [s at dongle-incoming:2] Playback("Dongle/dongle0-0100000001", ""agent-newlocation"") in new stack
[Jun 11 18:07:38] DEBUG[19646] channel.c: Set channel Dongle/dongle0-0100000001 to write format gsm
[Jun 11 18:07:38] DEBUG[19646] channel.c: Scheduling timer at (50 requested / 50 actual) timer ticks per second
[Jun 11 18:07:38] VERBOSE[19646] file.c: -- <Dongle/dongle0-0100000001> Playing 'agent-newlocation.gsm' (language 'en')
[Jun 11 18:07:39] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:07:39] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:07:39] DEBUG[19618] at_response.c: [dongle0] ATA sent successfully for call id 1
[Jun 11 18:07:39] DEBUG[19618] at_queue.c: [dongle0] remove command 'ATA' expected response 'OK' real 'OK' cmd 1/2 flags 0x00 from queue
[Jun 11 18:07:39] DEBUG[19618] at_queue.c: [dongle0] write command 'AT^DDSETEX' expected response 'OK' length 13
[Jun 11 18:07:39] DEBUG[19618] at_queue.c: [dongle0] [AT^DDSETEX=2
]
[Jun 11 18:07:39] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:07:39] DEBUG[19618] at_read.c: [dongle0] [
^CONN:1,0
]
[Jun 11 18:07:39] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT+CLCC' expected response 'OK' after head of queue
[Jun 11 18:07:39] DEBUG[19618] at_response.c: [dongle0] CONN Received call_index 1 call_type 0
[Jun 11 18:07:39] DEBUG[19618] channel.c: [dongle0] call idx 1 mpty 0, change state from 'incoming' to 'active' has channel
[Jun 11 18:07:39] DEBUG[19618] channel.c: [dongle0] Call idx 1 answer
[Jun 11 18:07:39] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:07:39] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:07:39] DEBUG[19618] at_response.c: [dongle0] AT^DDSETEX sent successfully
[Jun 11 18:07:39] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT^DDSETEX' expected response 'OK' real 'OK' cmd 2/2 flags 0x01 from queue
[Jun 11 18:07:39] DEBUG[19618] at_queue.c: [dongle0] remove task with 2 command(s) begin with 'ATA' expected response 'OK' from queue
[Jun 11 18:07:39] DEBUG[19618] at_queue.c: [dongle0] write command 'AT+CLCC' expected response 'OK' length 8
[Jun 11 18:07:39] DEBUG[19618] at_queue.c: [dongle0] [AT+CLCC
]
[Jun 11 18:07:39] DEBUG[19618] at_read.c: [dongle0] receive 49 byte, used 49, free 1999, read 0, write 49
[Jun 11 18:07:39] DEBUG[19618] at_read.c: [dongle0] [
+CLCC: 1,1,0,0,0,"919689597995",145,"",
OK
]
[Jun 11 18:07:39] DEBUG[19618] at_response.c: [dongle0] CLCC callidx 1 dir 1 state 0 mode 0 mpty 0 number 919689597995 type 145
[Jun 11 18:07:39] DEBUG[19618] at_response.c: [dongle0] AT+CLCC sent successfully
[Jun 11 18:07:39] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT+CLCC' expected response 'OK' real 'OK' cmd 1/1 flags 0x01 from queue
[Jun 11 18:07:39] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT+CLCC' expected response 'OK' from queue
[Jun 11 18:07:42] DEBUG[19646] channel.c: Scheduling timer at (0 requested / 0 actual) timer ticks per second
[Jun 11 18:07:42] DEBUG[19646] channel.c: Scheduling timer at (0 requested / 0 actual) timer ticks per second
[Jun 11 18:07:42] DEBUG[19646] channel.c: Scheduling timer at (0 requested / 0 actual) timer ticks per second
[Jun 11 18:07:42] DEBUG[19646] channel.c: Set channel Dongle/dongle0-0100000001 to write format slin
[Jun 11 18:07:42] DEBUG[19646] pbx.c: Launching 'Read'
[Jun 11 18:07:42] VERBOSE[19646] pbx.c: -- Executing [s at dongle-incoming:3] Read("Dongle/dongle0-0100000001", "pincode,,3,sn,3,12") in new stack
[Jun 11 18:07:42] VERBOSE[19646] app_read.c: -- Accepting a maximum of 3 digits.
[Jun 11 18:07:43] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:07:43] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 16
]
[Jun 11 18:07:47] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:07:47] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 13
]
[Jun 11 18:07:54] VERBOSE[19646] app_read.c: -- User entered nothing, 2 chances left
[Jun 11 18:07:57] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:07:57] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:07:57] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:07:57] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:07:57] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:07:57] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:07:57] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:07:57] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:08:00] DEBUG[19618] at_read.c: [dongle0] receive 19 byte, used 19, free 2029, read 0, write 19
[Jun 11 18:08:00] DEBUG[19618] at_read.c: [dongle0] [
^CEND:1,21,0,16
]
[Jun 11 18:08:00] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT+CLCC' expected response 'OK' after head of queue
[Jun 11 18:08:00] DEBUG[19618] at_queue.c: [dongle0] write command 'AT+CLCC' expected response 'OK' length 8
[Jun 11 18:08:00] DEBUG[19618] at_queue.c: [dongle0] [AT+CLCC
]
[Jun 11 18:08:00] DEBUG[19618] at_response.c: [dongle0] CEND: call_index 1 duration 21 end_status 0 cc_cause 16 Line disconnected
[Jun 11 18:08:00] DEBUG[19618] channel.c: [dongle0] call idx 1 mpty 0, change state from 'active' to 'released' has channel
[Jun 11 18:08:00] DEBUG[19618] cpvt.c: [dongle0] destroy cpvt for call_idx 1 dir 1 state 'released' flags 8 has channel
[Jun 11 18:08:00] VERBOSE[19646] app_read.c: -- User disconnected
[Jun 11 18:08:00] DEBUG[19646] pbx.c: Extension s, priority 3 returned normally even though call was hung up
[Jun 11 18:08:00] DEBUG[19646] channel.c: Soft-Hanging up channel 'Dongle/dongle0-0100000001'
[Jun 11 18:08:00] DEBUG[19646] channel.c: Hanging up channel 'Dongle/dongle0-0100000001'
[Jun 11 18:08:00] DEBUG[19598] devicestate.c: No provider found, checking channel drivers for Dongle - dongle0
[Jun 11 18:08:00] DEBUG[19598] channel.c: Checking device state for device dongle0
[Jun 11 18:08:00] DEBUG[19598] devicestate.c: Changing state for Dongle/dongle0 - state 1 (Not in use)
[Jun 11 18:08:00] DEBUG[19598] devicestate.c: device 'Dongle/dongle0' state '1'
[Jun 11 18:08:00] DEBUG[19620] app_queue.c: Device 'Dongle/dongle0' changed to state '1' (Not in use) but we don't care because they're not a member of any queue.
[Jun 11 18:08:00] DEBUG[19598] devicestate.c: No provider found, checking channel drivers for Dongle - dongle0
[Jun 11 18:08:00] DEBUG[19598] channel.c: Checking device state for device dongle0
[Jun 11 18:08:00] DEBUG[19598] devicestate.c: Changing state for Dongle/dongle0 - state 1 (Not in use)
[Jun 11 18:08:00] DEBUG[19598] devicestate.c: device 'Dongle/dongle0' state '1'
[Jun 11 18:08:00] DEBUG[19620] app_queue.c: Device 'Dongle/dongle0' changed to state '1' (Not in use) but we don't care because they're not a member of any queue.
[Jun 11 18:08:00] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:08:00] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:08:00] DEBUG[19618] at_response.c: [dongle0] AT+CLCC sent successfully
[Jun 11 18:08:00] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT+CLCC' expected response 'OK' real 'OK' cmd 1/1 flags 0x01 from queue
[Jun 11 18:08:00] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT+CLCC' expected response 'OK' from queue
[Jun 11 18:08:01] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:08:01] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 17
]
[Jun 11 18:08:04] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:08:04] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 12
]
[Jun 11 18:08:05] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:08:05] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 15
]
[Jun 11 18:08:15] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:08:15] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:08:15] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:08:15] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:08:15] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:08:15] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:08:15] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:08:15] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:08:25] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:08:25] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:08:25] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:08:25] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:08:25] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:08:25] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:08:25] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:08:25] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:08:30] DEBUG[19607] chan_mobile.c: connect() failed (115).
[Jun 11 18:08:35] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:08:35] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 12
]
[Jun 11 18:08:35] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:08:35] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 17
]
[Jun 11 18:08:39] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:08:39] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 20
]
[Jun 11 18:08:46] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:08:46] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 15
]
[Jun 11 18:08:56] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:08:56] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:08:56] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:08:56] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:08:56] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:08:56] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:08:56] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:08:56] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:08:57] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:08:57] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 11
]
[Jun 11 18:09:00] DEBUG[19607] chan_mobile.c: connect() failed (115).
[Jun 11 18:09:06] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:09:06] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 14
]
[Jun 11 18:09:13] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:09:13] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 10
]
[Jun 11 18:09:14] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:09:14] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 15
]
[Jun 11 18:09:16] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:09:16] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 18
]
[Jun 11 18:09:22] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:09:22] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 14
]
[Jun 11 18:09:23] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:09:23] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 18
]
[Jun 11 18:09:29] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:09:29] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 14
]
[Jun 11 18:09:30] DEBUG[19607] chan_mobile.c: connect() failed (115).
[Jun 11 18:09:39] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:09:39] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:09:39] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:09:39] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:09:39] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:09:39] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:09:39] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:09:39] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:09:42] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:09:42] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 10
]
[Jun 11 18:09:44] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:09:44] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 16
]
[Jun 11 18:09:54] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:09:54] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:09:54] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:09:54] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:09:54] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:09:54] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:09:54] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:09:54] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:10:00] DEBUG[19607] chan_mobile.c: connect() failed (115).
[Jun 11 18:10:04] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:10:04] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:10:04] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:10:04] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:10:04] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:10:04] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:10:04] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:10:04] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:10:14] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:10:14] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:10:14] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:10:14] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:10:14] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:10:14] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:10:14] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:10:14] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:10:19] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:10:19] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 10
]
[Jun 11 18:10:29] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:10:29] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:10:29] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:10:29] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:10:29] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:10:29] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:10:29] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:10:29] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:10:39] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:10:39] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:10:39] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:10:39] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:10:39] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:10:39] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:10:39] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:10:39] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:10:46] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:10:46] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 14
]
[Jun 11 18:10:48] DEBUG[19618] at_read.c: [dongle0] receive 13 byte, used 13, free 2035, read 0, write 13
[Jun 11 18:10:48] DEBUG[19618] at_read.c: [dongle0] [
^RSSI: 17
]
[Jun 11 18:10:58] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:10:58] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:10:58] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:10:58] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:10:58] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:10:58] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:10:58] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:10:58] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:11:00] DEBUG[19607] chan_mobile.c: connect() failed (115).
[Jun 11 18:11:08] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:11:08] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:11:08] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:11:08] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:11:08] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:11:08] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:11:08] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:11:08] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:11:18] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:11:18] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:11:18] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:11:18] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:11:18] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:11:18] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:11:18] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:11:18] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:11:28] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:11:28] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:11:28] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:11:28] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:11:28] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:11:28] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:11:28] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:11:28] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:11:30] DEBUG[19607] chan_mobile.c: connect() failed (115).
[Jun 11 18:11:38] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:11:38] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:11:38] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:11:38] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:11:38] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:11:38] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:11:38] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:11:38] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:11:48] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:11:48] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:11:48] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:11:48] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:11:48] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:11:48] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:11:48] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:11:48] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:11:58] DEBUG[19618] at_queue.c: [dongle0] insert task with 1 commands begin with 'AT' expected response 'OK' after head of queue
[Jun 11 18:11:58] DEBUG[19618] at_queue.c: [dongle0] write command 'AT' expected response 'OK' length 3
[Jun 11 18:11:58] DEBUG[19618] at_queue.c: [dongle0] [AT
]
[Jun 11 18:11:58] DEBUG[19618] at_read.c: [dongle0] receive 6 byte, used 6, free 2042, read 0, write 6
[Jun 11 18:11:58] DEBUG[19618] at_read.c: [dongle0] [
OK
]
[Jun 11 18:11:58] DEBUG[19618] at_response.c: [dongle0] AT sent successfully
[Jun 11 18:11:58] DEBUG[19618] at_queue.c: [dongle0] remove command 'AT' expected response 'OK' real 'OK' cmd 1/1 flags 0x03 from queue
[Jun 11 18:11:58] DEBUG[19618] at_queue.c: [dongle0] remove task with 1 command(s) begin with 'AT' expected response 'OK' from queue
[Jun 11 18:12:00] DEBUG[19607] chan_mobile.c: connect() failed (115).
> Read application does not set the variable
> ------------------------------------------
>
> Key: ASTERISK-21898
> URL: https://issues.asterisk.org/jira/browse/ASTERISK-21898
> Project: Asterisk
> Issue Type: Bug
> Security Level: None
> Components: Applications/app_read
> Affects Versions: 11.4.0
> Environment: I am running a Ubuntu 12.04, I have downloaded 1.8 asterisk version, build was successful. I have configured chan_dongle to work with a voice enabled dongle.
> Marked as Major since setting the variable is a essential feature for the read application. Without that its a useless app.
> Reporter: Siddharth Jagtiani
> Assignee: Siddharth Jagtiani
> Attachments: debugLog.txt
>
>
> {noformat}
> >core show dongle state dongle0< reports
> Device : dongle0
> State : Free
> Audio : /dev/ttyUSB1
> Data : /dev/ttyUSB2
> Voice : Yes
> SMS : Yes
> Manufacturer : huawei
> Model : E303D
> Firmware : 21.157.72.00.356
> IMEI : correctIMEI
> IMSI : correctIMSI
> GSM Registration Status : Registered, home network
> RSSI : 15, -116 dBm
> Mode : No Service
> Submode : No service
> Provider Name : IDEA
> Location area code : "A03D"
> Cell ID : "B96B"
> Subscriber Number : Unknown
> SMS Service Center : +91correctnumber
> Use UCS-2 encoding : Yes
> USSD use 7 bit encoding : No
> USSD use UCS-2 decoding : Yes
> Tasks in queue : 0
> Commands in queue : 0
> Call Waiting : Disabled
> Current device state : start
> Desired device state : start
> When change state : now
> Calls/Channels : 0
> Active : 0
> Held : 0
> Dialing : 0
> Alerting : 0
> Incoming : 0
> Waiting : 0
> Releasing : 0
> Initializing : 0
> {noformat}
> When I make a incoming call, and put punch in a code I get following results only in " entered" as a result.
> When I send a sms to this number, it fills up sms.txt with the sms and the source number correctly.
> Basically pincode variable does not get a value on the read application.
> {noformat}
> Extensions.conf
> [dongle-incoming]
> exten => sms,1,Verbose(Incoming SMS from ${CALLERID(num)} ${SMS})
> exten => sms,n,System(echo '${STRFTIME(${EPOCH},,%Y-%m-%d %H:%M:%S)} - ${DONGLE} - ${CALLERID(num)}: ${SMS}' >> /var/log/asterisk/sms.txt)
> exten => sms,n,Hangup()
> exten => ussd,1,Verbose(Incoming USSD: ${USSD})
> exten => ussd,n,System(echo '${STRFTIME(${EPOCH},,%Y-%m-%d %H:%M:%S)} - ${DONGLE}: ${USSD}' >> /var/log/asterisk/ussd.txt)
> exten => ussd,n,Hangup()
> exten => s,1,Answer()
> exten => s,n,Read(pincode,agent-newlocation,3)
> exten => s,n,System(echo '${pincode} entered')
> exten => s,n,Goto(1)
> {noformat}
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators: https://issues.asterisk.org/jira/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
More information about the asterisk-bugs
mailing list