[asterisk-bugs] [JIRA] (DAHLIN-325) Error when starting DAHDI

[André Emerich (JIRA)]

    [ https://issues.asterisk.org/jira/browse/DAHLIN-325?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=208395#comment-208395 ] 

André Emerich commented on DAHLIN-325:
--------------------------------------

I ran just "dahdi_genconf" before..
Now, I ran "dahdi_genconf system" and it set up the /etc/dahdi/system.conf.

After running the dahdi_cfg:

dahdi_cfg -vvvvvvvvv
DAHDI Tools Version - 2.7.0

DAHDI Version: 2.7.0
Echo Canceller(s): MG2
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
Channel 09: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
Channel 12: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 12)
Channel 13: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 13)
Channel 14: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 14)
Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15)
Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
Channel 17: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 17)
Channel 18: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 18)
Channel 19: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 19)
Channel 20: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 20)
Channel 21: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 21)
Channel 22: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 22)
Channel 23: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 23)
Channel 24: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 24)
Channel 25: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 25)
Channel 26: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 26)
Channel 27: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 27)
Channel 28: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 28)
Channel 29: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 29)
Channel 30: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 30)
Channel 31: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 31)

31 channels to configure.

Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2
Setting echocan for channel 5 to mg2
Setting echocan for channel 6 to mg2
Setting echocan for channel 7 to mg2
Setting echocan for channel 8 to mg2
Setting echocan for channel 9 to mg2
Setting echocan for channel 10 to mg2
Setting echocan for channel 11 to mg2
Setting echocan for channel 12 to mg2
Setting echocan for channel 13 to mg2
Setting echocan for channel 14 to mg2
Setting echocan for channel 15 to mg2
Setting echocan for channel 16 to none
Setting echocan for channel 17 to mg2
Setting echocan for channel 18 to mg2
Setting echocan for channel 19 to mg2
Setting echocan for channel 20 to mg2
Setting echocan for channel 21 to mg2
Setting echocan for channel 22 to mg2
Setting echocan for channel 23 to mg2
Setting echocan for channel 24 to mg2
Setting echocan for channel 25 to mg2
Setting echocan for channel 26 to mg2
Setting echocan for channel 27 to mg2
Setting echocan for channel 28 to mg2
Setting echocan for channel 29 to mg2
Setting echocan for channel 30 to mg2
Setting echocan for channel 31 to mg2

But I can't start dahdi module yet.. 

/etc/init.d/dahdi start
Loading DAHDI hardware modules:
  wcte12xp:                                                [  OK  ]

Running dahdi_cfg:                                         [  OK  ]
Missing '/sys/bus/astribanks/drivers/xppdrv/sync'
                
> Error when starting DAHDI
> -------------------------
>
>                 Key: DAHLIN-325
>                 URL: https://issues.asterisk.org/jira/browse/DAHLIN-325
>             Project: DAHDI-Linux
>          Issue Type: Bug
>      Security Level: None
>          Components: dahdi (the module), wcte12xp
>    Affects Versions: 2.7.0
>         Environment: Cent OS 6.2 x64 + DAHDI Complete 2.7
>            Reporter: André Emerich
>            Assignee: Russ Meyerriecks
>
> I got this error when try to start the DAHDI.
> "Loading DAHDI hardware modules:
>   wcte12xp:                                                [  OK  ]
> Running dahdi_cfg:                                         [  OK  ]
> Missing '/sys/bus/astribanks/drivers/xppdrv/sync'"
> In this forum (http://blogs.digium.com/2012/11/05/how-to-install-asterisk-11-on-centos-6/) was commented by a Digium Technical Marketing Specialist that It could be a bug.
> I tried to reinstall the DAHDI module, but no sucess.

--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators: https://issues.asterisk.org/jira/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira