[asterisk-bugs] [JIRA] (ASTERISK-23065) On Asterisk start, device state is INVALID for previously registered PJSIP endpoints, despite re-registrations

[Rusty Newton (JIRA)]

     [ https://issues.asterisk.org/jira/browse/ASTERISK-23065?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Rusty Newton updated ASTERISK-23065:
------------------------------------

    Description: 
*Reproduction and observation:*

 * Register an endpoint to Asterisk for the first time. (or wipe AstDB and then register). The Device state will be "NOT_INUSE".

 * Stop and start Asterisk. Device state shows "INVALID" for the endpoint.

 * After the endpoint re-registers, we continue to show "INVALID" for the endpoint.

 * Using the endpoint to dial an extension in dialplan, results in appropriate state changes (INUSE, RINGING, etc) and after hanging up, it ends up at "NOT_INUSE"

 * If you restart a phone and the phone unregisters, then Asterisk will make a state change to "UNAVAILABLE" and then "NOT_INUSE" after registration, which seems appropriate.

*Notes:*

In testing this, I notice that OPTIONS for the purpose of qualification do not get sent out unless the state is something other than INVALID. Though this is erratic and with a few tries I can reproduce endpoints in a "NOT_INUSE" state that don't have OPTIONS being generated for them.

*Debug:*

 * cli_comment_output.txt contains "pjsip show endpoints" output after an initial registration of the phones, where the astdb had been wiped, plus output after a restart of Asterisk (stop and then start) where the AstDB info still exists for the previous registrations.

 * full_initial_reg.txt contains the full log from the initial run

 * full_after_restart_rereg.txt contains the full log from the restart where I wait for the endpoints to re-register


  was:
*Reproduction and observation:*

 * Register an endpoint to Asterisk for the first time. (or wipe AstDB and then register). The Device state will be "NOT_INUSE".

 * Stop and start Asterisk. Device state shows "INVALID" for the endpoint.

 * After the endpoint re-registers, we continue to show "INVALID" for the endpoint.

 * Using the endpoint to dial an extension in dialplan, results in appropriate state changes (INUSE, RINGING, etc) and after hanging up, it ends up at "NOT_INUSE"

 * If you restart a phone and the phone unregisters, then Asterisk will make a state change to "UNAVAILABLE" and then "NOT_INUSE" after registration, which seems appropriate.

*Notes:*

In testing this, I notice that OPTIONS for the purpose of qualification do not get sent out unless the state is something other than INVALID. Though this is erratic and with a few tries I can reproduce endpoints in a "NOT_INUSE" state that don't have OPTIONS being generated for them.

    
> On Asterisk start, device state is INVALID for previously registered PJSIP endpoints, despite re-registrations
> --------------------------------------------------------------------------------------------------------------
>
>                 Key: ASTERISK-23065
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-23065
>             Project: Asterisk
>          Issue Type: Bug
>          Components: Core/General, Resources/res_pjsip
>    Affects Versions: 12.0.0
>         Environment: SVN-branch-12-r404531
>            Reporter: Rusty Newton
>            Severity: Minor
>         Attachments: cli_command_output.txt, full_after_restart_rereg.txt, full_initial_reg.txt, pjsip.conf.txt
>
>
> *Reproduction and observation:*
>  * Register an endpoint to Asterisk for the first time. (or wipe AstDB and then register). The Device state will be "NOT_INUSE".
>  * Stop and start Asterisk. Device state shows "INVALID" for the endpoint.
>  * After the endpoint re-registers, we continue to show "INVALID" for the endpoint.
>  * Using the endpoint to dial an extension in dialplan, results in appropriate state changes (INUSE, RINGING, etc) and after hanging up, it ends up at "NOT_INUSE"
>  * If you restart a phone and the phone unregisters, then Asterisk will make a state change to "UNAVAILABLE" and then "NOT_INUSE" after registration, which seems appropriate.
> *Notes:*
> In testing this, I notice that OPTIONS for the purpose of qualification do not get sent out unless the state is something other than INVALID. Though this is erratic and with a few tries I can reproduce endpoints in a "NOT_INUSE" state that don't have OPTIONS being generated for them.
> *Debug:*
>  * cli_comment_output.txt contains "pjsip show endpoints" output after an initial registration of the phones, where the astdb had been wiped, plus output after a restart of Asterisk (stop and then start) where the AstDB info still exists for the previous registrations.
>  * full_initial_reg.txt contains the full log from the initial run
>  * full_after_restart_rereg.txt contains the full log from the restart where I wait for the endpoints to re-register

--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators: https://issues.asterisk.org/jira/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira