[asterisk-bugs] [JIRA] (ASTERISK-21099) Reload makes dahdi not work

[Max E. Reyes Vera J. (JIRA)]

    [ https://issues.asterisk.org/jira/browse/ASTERISK-21099?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=205233#comment-205233 ] 

Max E. Reyes Vera J. edited comment on ASTERISK-21099 at 4/11/13 5:08 PM:
--------------------------------------------------------------------------

@Rusty

Added the files here.

{quote}what is the make, model and firmware version of your card?{quote}

I have tried with a Digium Card 4 E1's 1st Generation, driver: wct4xxp, also with an OpenVox Card. Same result. The Server is an HP ML110 G2.

The provider claim the E1 must work with ccs,hdb3,crc4 & euroisdn, but no luck, I have tried without the crc4, changing to ami and national and same result.

It's very weird, both cards don't show the alarm when I Disconnect the E1 until I ran the dahdi_cfg.

                
      was (Author: navaismo):
    @Rusty

Added the files here.

{quote}What is the make, model...{quote}

I have tried with a Digium Card 4 E1's 1st Generation, driver: wct4xxp, also with an OpenVox Card. Same result. The Server is an HP ML110 G2.

The provider claim the E1 must work with ccs,hdb3,crc4 & euroisdn, but no luck, I have tried without the crc4, changing to ami and national and same result.

It's very weird, both cards don't show the alarm when I Disconnect the E1 until I ran the dahdi_cfg.

                  
> Reload makes dahdi not work
> ---------------------------
>
>                 Key: ASTERISK-21099
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-21099
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: Channels/chan_dahdi
>    Affects Versions: 11.2.1
>         Environment: Linux, x86, asterisk 11.2.1
>            Reporter: Jorge Bastos
>            Assignee: Rusty Newton
>         Attachments: backtrace2.txt, backtrace.txt, core_show_locks2.txt, core_show_locks.txt, dahdi_debug.txt, pri_debug.txt
>
>
> Since i'm using 11.2.1, I've noticed a problem with DAHDI, some some times I wasn't able to make call's, or receive them from the outside.
> All I had to do, was dahdi restart.
> After some time I discovered, that his happened after a core reload, so steps in my instalation to make this happen:
> - core reload
> - "i can't make or receive call's from the outside"
> - dahdi restart
> - everything's normal.
> This is same behavior that didn't happened when I was using 10.12.0
> Dahdi version (2.6.1) and libpri (1.4.14) are the same.
> I start receiving this information when i cannot make/receive call's:
> [2013-02-13 21:30:04] ERROR[26528]: chan_dahdi.c:14449 dahdi_pri_error: PRI Span: 2 Unable to receive TEI from network in state 3(Establish awaiting TEI)!
> As said, after the dahdi restart, everything went back to normal.
> What can I do to debug/help on this problem?

--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators: https://issues.asterisk.org/jira/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira