[asterisk-bugs] [JIRA] Commented: (ASTERISK-20391) Digium TE220 , asterisk 1.8.15.1 Libpri 1.4.12. Dahdi 2.6.1 PRI 1 (A) PSTN E1 and PRI 2 (B) NEC E1, DID based routing to NEC PBX, Everything fine except no ringback tone when any call from Asterisk or PRI A to NEC PBX Extensions

Hashim (JIRA) noreply at issues.asterisk.org
Sun Sep 9 13:26:07 CDT 2012


    [ https://issues.asterisk.org/jira/browse/ASTERISK-20391?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=196805#comment-196805 ] 

Hashim commented on ASTERISK-20391:
-----------------------------------

Yesterday, I tried SVN Asterisk branch 1.8 .
No success again.

Alternatively I tried Dial options r(ring) and m but cannot find any affect to that options while the call send to channels.



> Digium TE220 , asterisk 1.8.15.1 Libpri 1.4.12. Dahdi 2.6.1 PRI 1 (A) PSTN E1 and PRI 2 (B) NEC E1, DID based routing to NEC PBX, Everything fine except no ringback tone when any call from Asterisk or PRI A to NEC PBX Extensions
> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
>                 Key: ASTERISK-20391
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-20391
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>    Affects Versions: 1.8.15.1
>         Environment: CentOS 5.8 32 bit, asterisk 1.8.15.1 Libpri 1.4.12. Dahdi 2.6.1 , Digium Hardware TE220 without echo.
>            Reporter: Hashim
>         Attachments: pri_debug_2012_09_08.txt, pri_debug.txt
>
>
> Hi,
> Asterisk PBX connected to NEC (Model Number not available)ISDN signalling used qsig/euroisdn.
> While calling from Caller X ->  PRI A (E1 PSTN) to DID Route to PRI B (NEC) -> NEC extension rings but no ringback on  Caller X but can talk if extension picks up the call.
> It's looks like same issue mentioned in ASTERISK-14397
> but in this case I can talk if the NEC extension picks up, only issue is no ringback tone for the external callers.
> Internal Xlite/Eyebeam has ringback tone but Hard extensions cannot hear ringback tone.
> I have had used/changed most available parameters for PRI.
> {noformat}
> [Sep  6 19:45:18] VERBOSE[8910] sig_pri.c:     -- Accepting call from '048873370' to '13227' on channel 0/1, span 1
> [Sep  6 19:45:18] VERBOSE[8983] pbx.c:     -- Executing [13227 at from-g11:1] GotoIf("DAHDI/i1/048873370-1", "0?no") in new stack
> [Sep  6 19:45:18] VERBOSE[8983] pbx.c:     -- Executing [13227 at from-g11:2] GotoIf("DAHDI/i1/048873370-1", "0?no") in new stack
> [Sep  6 19:45:18] VERBOSE[8983] pbx.c:     -- Executing [13227 at from-g11:3] Set("DAHDI/i1/048873370-1", "DATETIME=2012-0906-1945-18-1947381078-GST") in new stack
> [Sep  6 19:45:18] VERBOSE[8983] pbx.c:     -- Executing [13227 at from-g11:4] Answer("DAHDI/i1/048873370-1", "") in new stack
> [Sep  6 19:45:18] VERBOSE[8983] pbx.c:     -- Executing [13227 at from-g11:5] Set("DAHDI/i1/048873370-1", "CHANNEL(transfercapability)=SPEECH") in new stack
> [Sep  6 19:45:18] VERBOSE[8983] pbx.c:     -- Executing [13227 at from-g11:6] Dial("DAHDI/i1/048873370-1", "DAHDI/g12/13227,rTt") in new stack
> [Sep  6 19:45:18] DEBUG[8983] sig_pri.c: sig_pri_request 32
> [Sep  6 19:45:18] DEBUG[8983] sig_pri.c: CALLER NAME:  NUM: 048873370  --> Caller Number
> [Sep  6 19:45:18] VERBOSE[8983] sig_pri.c:     -- Requested transfer capability: 0x00 - SPEECH
> [Sep  6 19:45:18] VERBOSE[8983] app_dial.c:     -- Called DAHDI/g12/13227  --> NEC Trunk
> [Sep  6 19:45:18] WARNING[8983] app_dial.c: Invalid timeout specified: 'rTt'. Setting timeout to infinite
> [Sep  6 19:45:18] VERBOSE[8983] app_dial.c:     -- DAHDI/i2/13227-1 is proceeding passing it to DAHDI/i1/048873370-1
> [Sep  6 19:45:18] VERBOSE[8983] app_dial.c:     -- DAHDI/i2/13227-1 is ringing --> NEC Extension Ringing but No Ringback tone for 048873370 (Only Silence) but if call answers then AUDIO is clean.
> [Sep  6 19:45:24] VERBOSE[8910] sig_pri.c:     -- Span 1: Channel 0/1 got hangup request, cause 16
> [Sep  6 19:45:24] VERBOSE[8983] chan_dahdi.c:     -- Hungup 'DAHDI/i2/13227-1'
> [Sep  6 19:45:24] VERBOSE[8983] pbx.c:   == Spawn extension (from-g11, 13227, 6) exited non-zero on 'DAHDI/i1/048873370-1'
> [Sep  6 19:45:24] VERBOSE[8983] chan_dahdi.c:     -- Hungup 'DAHDI/i1/048873370-1'
> {noformat}
> I have attached the debug log, no clue in that.
> So far
> 1) Answer() before passing to PRI B NEC : No Success 
> 2) Dial parameters r : No Success
> 3) Background : No Success
> 4) Generate ringing (Playtones): No Success, But this time I could hear one small ring then silence
> 5) PRI Signalling qsiq/euroisdn : No Success
> 6) PRI AUDIO 3KAUDIO to SPEECH: No Success
> 7) Change Asterisk Versions one time 1.8.12.0 : No Success
> I appreciate some advice.
> Thanks

--
This message is automatically generated by JIRA.
For more information on JIRA, see: http://www.atlassian.com/software/jira



More information about the asterisk-bugs mailing list