[asterisk-bugs] [JIRA] Feedback Requested: (ASTERISK-20367) One-way audio with media_address

[Rusty Newton (JIRA)]

     [ https://issues.asterisk.org/jira/browse/ASTERISK-20367?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Rusty Newton updated ASTERISK-20367:
------------------------------------

    Assignee: Richard Kenner  (was: Rusty Newton)
      Status: Waiting for Feedback  (was: Triage)

>  One-way audio with media_address
> ---------------------------------
>
>                 Key: ASTERISK-20367
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-20367
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: Channels/chan_sip/General
>    Affects Versions: 10.7.1
>            Reporter: Richard Kenner
>            Assignee: Richard Kenner
>
> I'm migrating from Asterisk 1.6.2 to 10.7.0.  In 1.6.2, I made a small patch to allow specifying an address for RTP media.  That worked.  In 10.7.0, this appears to be built in with "media_address", but it doesn't work for me.
> My Asterisk server has multiple addresses, all global address on two different /24's with different routing policies via BGP.  I'm connecting to a phone that's over NAT.  I have "nat=yes" in the "general" section of sip.conf.  Everything works fine with the default.
> But if I specify media_address to be the Asterisk server's address on the other /24, I get one-way audio.  I can see with "sip debug" that the proper address is being given in the SDP data.  Audio from the phone is fine. Audio *to* the phone starts out with maybe 1-2 seconds of very garbled audio, then goes quiet.
> Running traceroute shows that data comes from the phone *to* Asterisk on the desired /24, but goes out with a source address from the other /24 (the default address).  I'm not sure if this is the problem or not, but in any event, I think the source address for RTP should be the one in "media_address" and want it that way for my purposes anyway.  Is there a way to configure this to happen?  If not, where should I look to make a patch?  And is this likely the reason for the one-way audio or is something else the likely cause?

--
This message is automatically generated by JIRA.
For more information on JIRA, see: http://www.atlassian.com/software/jira